trinityboringsolutions.com

Ladonia Texas Directional Boring: Crockett Loam, Texas State Highway 34, North Sulpher River

Quick Answer: Texas State Highway 34 is a key crossing; Trinity handles directional boring, also called horizontal directional drilling (HDD), in Ladonia and across Texas. From our Yukon, Oklahoma main office, Ladonia is 233 road miles away, so a Main Street bore needs mobilization in the plan. Crockett soil covers 36% of mapped ground, and clay at 40 inches can stick to the reamer. Staged reaming helps manage that ground near Texas State Highway 34.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Ladonia bores at a glance

  • Incorporated city in Fannin County, Texas. Population 629 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 233 miles, about 4.7 hours of driving.
  • Ground: Crockett soil is mapped on 36 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 61 percent of the area.
  • Highways inside the boundary: Texas State Highway 34, FM 2990, Texas State Highway 50 and FM 64. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: North Sulpher River and Pecan Creek.
  • Public water: City of Ladonia, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring on Main Street in Ladonia?

We take directional boring work in Ladonia and across Texas; the Census Bureau Vintage 2024 estimate puts Ladonia at 629 people in Fannin County. Water, sewer, gas, electric conduit and fiber can run along Main Street or toward Texas State Highway 34. We match the bore plan to the line and the crossing, rather than treating every street route alike.

Our main office is in Yukon, Oklahoma, and Ladonia work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. A Main Street service can be as small as a 3/4 inch line; at the other end, work can involve 48 inch casing, with bore lengths from 10 feet to 5,000 feet. Our family business started in 1965 and has done directional boring since 1982; Ladonia is 233 road miles from our Yukon main office.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does a bore meet in Ladonia near Crockett soil?

The USDA soil survey maps Crockett soil across 36% of Ladonia, with Crockett loam on 34% of the mapped area. Ferris clay accounts for 21%, and Wilson silt loam for 20%. At about 40 inches below the surface, the mapped texture is clay across 99% of the area, with average clay content of 48%. Crockett and Ferris soil patterns are mapped, not test borings, so we check site conditions before boring. Clay can cling to a reamer and swell around pipe, so the drilling fluid and reaming sequence matter.

USDA soil survey, inside the Ladonia city limitsWhat is mapped
Soil series mappedCrockett 36 percent, Ferris 21 percent, Wilson 20 percent, Heiden 9 percent and Fairlie 6 percent
Texture at the surfaceclay 42 percent, loam 36 percent and silt loam 21 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 97 percent and lean clay (CL) 3 percent
Average clay content about 40 inches down48 percent
Bedrock mapped within 60 inches61 percent of the area (0 percent hard rock, 61 percent weathered rock)
Seasonal water table within 60 inches21 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel100 percent of the area

Weathered bedrock is mapped within 60 inches on 61% of Ladonia, with typical bedrock depth at 50 inches; hard bedrock is not mapped at that depth. A seasonal water table is mapped within 60 inches across 21%, and flood prone soils cover 6%, which matters near North Sulpher River. High steel corrosion risk is mapped throughout the area, so the line owner should consider casing and tracer wire materials. The Phanerozoic Wolfe City Formation includes sand, silt and calcareous mudstone, which can mean changing ground along a bore.

What does it take to bore through Ladonia clay?

Ladonia’s mapped clay at 40 inches can make the reamer sticky and hold fluid pressure. We plan the hole around that soil, then track the drill head and log its depth and pitch along the route.

  1. With clay mapped at 40 inches across 99% of Ladonia, we use a thinner fluid mix with polymer and watch returns so pressure does not lift pavement.
  2. Crockett soil can ball on a reamer, so we open the hole in stages and have the pipe ready to pull the same day.
  3. Before drilling near a Main Street water route or electric conduit, we hydrovac expose marked lines; paint shows position, not depth.
  4. Near North Sulpher River, we plan the bore below the channel, keep pits manageable if the seasonal water table is present, and check jurisdiction during planning.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Where does a Ladonia line have to go under North Sulpher River?

Texas State Highway 34 has 7.4 mapped roadway miles in Ladonia. FM 2990 has 3.1, Texas State Highway 50 has 2.4, and FM 64 has 2.1. Main Street is the longest named street at 1.27 miles, followed by Redner Street at 0.88 and Paris Street at 0.69. A route that crosses one of these roads needs its own alignment and depth plan; pavement and driveways can stay uncut when the bore runs beneath them.

CrossingTypeMapped extentWho has a say
Texas State Highway 34State highway7.4 roadway miles insideState highway office
FM 2990State highway3.1 roadway miles insideState highway office
Texas State Highway 50State highway2.4 roadway miles insideState highway office
FM 64State highway2.1 roadway miles insideState highway office
North Sulpher RiverStream0.43 channel miles insideChecked for Corps of Engineers jurisdiction
Pecan CreekStream0.15 channel miles insideChecked for Corps of Engineers jurisdiction
Hedrick BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Leggets BranchStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Bralley Pool CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
East Fork Pecan CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Ladonia or within one mile, so there is no mapped rail route to plan around. North Sulpher River runs 0.43 channel miles in town and Pecan Creek 0.15, with three mapped street crossings of named streams. A creek bore needs a route below the channel and a jurisdiction check during planning. No lake or pond is mapped within one mile of Town Plz.

Who has to sign off on a Ladonia bore under Texas State Highway 34?

The cover depth sets the bore profile under Texas State Highway 34: electric and communication lines need 60 inches at a crossing, while water and pressurized sewer also need 60 inches there. Along the right of way, the stated cover is 48 inches for electric and communication and 36 inches for water. TxDOT reviews the utility permit through its Paris District; the utility owner files in RULIS, and we prepare the bore plan and profile for that application. TxDOT may set a different depth. Existing highway pavement is bored or tunneled beneath, and rural highway crossings extend under all travel lanes. Main Street and the other streets in Ladonia belong to the city, so we confirm responsibility before planning work. A North Sulpher River crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are in the ground around Fannin County and Ladonia?

The City of Ladonia public water system uses groundwater wells and reports 557 service connections serving 597 people. Before a hydrovac pothole for a water route near Main Street, we expose marked utilities so the drill plan accounts for the existing water line. Electric service reported in Fannin County includes Oncor Electric Delivery Company, Texas New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson Collin Electric Cooperative and Lamar County Electric Cooperative. We confirm the line owner for the specific route before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of LadoniaPublic water systemGroundwater wells557 connections, 597 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative, Farmers Electric Cooperative, Grayson-Collin Electric Cooperative and Lamar County Electric Cooperative AssociationElectric utilities reporting service in Fannin CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Ladonia’s median housing year at 1970; 42% of homes were built before 1960, 43% from 1960 to 1999 and 15% in 2000 or later. That mix can mean a Main Street job is replacing older pipe or adding a newer service. We hydrovac expose marked utilities on the bore path before drilling near them, because locate paint gives position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Ladonia in relation to Commerce and the Yukon yard?

Ladonia is an incorporated town in Fannin County, at an elevation of 644 feet and covering 1.99 square miles. ZIP code 75449 serves the town. Pecan Gap is 5.5 miles east, Wolfe City 8.3 miles southwest, Windom 9.9 miles north, Honey Grove 11.3 miles north and Bailey 12.5 miles west. Commerce, the nearest larger city, is 13.3 miles south; Bonham, the county seat, is 17.8 miles northwest. From the Yukon yard, Ladonia is 233 road miles and a 4.7 hour drive, which is part of planning a Main Street mobilization.

Places near Ladonia

What kinds of bores might come up on Main Street in Ladonia?

  • Highway crossing: A bore beneath Texas State Highway 34 can keep the existing pavement intact while the line runs under the travel lanes.
  • Water service: A new service along Main Street can connect toward the City of Ladonia groundwater system, with marked lines exposed first.
  • Fiber conduit: A conduit route along Paris Street needs the electric and communication line owner confirmed before planning the bore.
  • Creek crossing: A route under North Sulpher River needs depth planned below the channel and a jurisdiction check during planning.
  • Street connection: A Church Street bore can carry water, sewer or conduit between properties without cutting the street surface.
  • Farm and acreage service: A longer route toward Pecan Gap can call for added mobilization planning from the Yukon yard.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Church Street in Ladonia?

Start with where the Church Street work sits: an address or map pin shows the route. Tell us what goes in the ground, such as a water line toward the City of Ladonia system, then give the pipe or conduit size and the footage. A sketch or plans help show where the route meets Texas State Highway 34 or a named street.

For a Ladonia route, soil and rock conditions matter first: Crockett clay can hold and grip the reamer, while weathered bedrock is mapped within 60 inches on 61% of the area. Next are crossing count and exposure work, especially near Texas State Highway 34 or North Sulpher River. Pipe size, bore length, pavement, pits, excavator time and sand backfill also affect the scope. The 233 road miles from Yukon make mobilization another factor, and urgent or high profile work can require more planning.

Questions people ask about boring in Ladonia

Does Trinity Boring Solutions take jobs in Ladonia and Fannin County, and who staffs them?

Yes. Trinity takes directional boring work in Ladonia and across Texas. The main office is in Yukon, and work is staffed by Trinity crews or through partner contractor yards vetted by Trinity. Customers work with Trinity from the first call through the bore log, including on a Fannin County route.

What ground should I expect for a Ladonia bore through Crockett soil?

The USDA soil survey maps Crockett soil across 36% of Ladonia. At about 40 inches below the surface, clay is the mapped texture across 99% of the area, with average clay content of 48%. That clay can stick to the reamer, so staged reaming and fluid control matter.

Is rock likely on a directional bore in Ladonia?

Weathered bedrock is mapped within 60 inches on 61% of Ladonia, with typical bedrock depth at 50 inches. Across Wilson soils, hard bedrock is not mapped within that depth, so we check ground conditions before boring. The Wolfe City Formation includes sand, silt and calcareous mudstone, so the ground may change along a bore rather than stay uniform.

Who approves a Ladonia bore under Texas State Highway 34?

TxDOT’s Paris District reviews the highway utility permit. The utility owner submits the application in RULIS, while we prepare the bore plan and profile. A Texas State Highway 34 crossing needs a depth profile that follows the line type and the permit conditions.

Can a utility line be bored under North Sulpher River in Ladonia?

A bore can be planned under North Sulpher River, which runs 0.43 channel miles in town. The route needs to stay below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Pecan Creek is another mapped stream to consider on a local route.

Who runs Ladonia’s public water system in Fannin County, and does its water come from groundwater wells?

The City of Ladonia owns the public water system, supplied by groundwater wells, so we account for utilities when boring near Texas State Highway 50. Public records report 557 service connections serving 597 people. For a bore near Main Street, we expose marked utilities so the plan accounts for water lines already in the route.

Can I reach Trinity after hours about an urgent bore near Paris Street in Ladonia?

Yes. From our Yukon main office, 233 road miles from Ladonia, a person answers Trinity’s phone 24 hours a day at (405) 409-7423. For urgent work near Paris Street, share the location and what line is involved so we can understand the route and whether emergency response is needed.

How much notice does Texas811 need for a Ladonia bore on Main Street?

For a Main Street excavation, place the Texas811 locate request at least 48 hours before work, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before it. For work planned along Commerce Street in Ladonia, if the start slips more than 14 days past the original notice, we make a new request. Before work continues near Pecan Creek, we have worn or moved marks refreshed through Texas811.

What affects the cost of a Ladonia bore under Texas State Highway 34?

The main factors are soil and rock, bore length and size, crossing and exposure work, pavement, pits, equipment time and mobilization. Crockett clay and the Texas State Highway 34 crossing can shape the plan, while Ladonia’s 233 road miles from Yukon affect travel and crew mobilization.

Where the Ladonia facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Ladonia

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Ladonia, Texas

Type the address of your job in Ladonia. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Ladonia

Same county: Bonham · Leonard · Trenton · Savoy · Ector · Dodd City · Ravenna. All counties: Texas county list.