trinityboringsolutions.com

Roxton Texas Directional Boring: Houston Black, FM 137 and Denton Creek

Quick Answer: FM 137 and FM 38 cross Roxton, where we take directional boring, also called horizontal directional drilling (HDD), beneath roads and utility routes. Hackleman Street, Pecan Street and 2nd Street lead the street list. From Yukon, Oklahoma, Roxton is 235 road miles away, a mobilization factor for work near Denton Creek. USDA maps Houston Black soil across 49 percent of town; sticky clay can load the reamer, so we stage the cuts.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Roxton bores at a glance

  • Incorporated city in Lamar County, Texas. Population 555 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 235 miles, about 4.8 hours of driving.
  • Ground: Houston Black soil is mapped on 49 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 7 percent of the area.
  • Highways inside the boundary: FM 137 and FM 38. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Denton Creek and Cane Creek.
  • Public water: City of Roxton, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Hackleman Street in Roxton?

Roxton is in Lamar County, where the Census Bureau Vintage 2024 estimate puts the population at 555. We install water, sewer, gas, electric conduit and fiber, routing lines beneath streets such as Hackleman Street or along routes near FM 137 according to the job plan. The line owner and route help set the work scope.

Our main office is in Yukon, Oklahoma, and Roxton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business that started in 1965 and has done directional boring since 1982. We have had no utility strike in over 25 years, a record relevant to routes near the City of Roxton water lines and electric conduit.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What is Roxton ground like under Houston Black soil?

The USDA soil survey maps Houston Black across 49 percent of Roxton, with Heiden at 15 percent, Elbon at 12 percent and Tinn at 10 percent. At about 40 inches, mapped texture is clay across 87 percent and stratified silty clay loam to clay across 12 percent; average clay content there is 52 percent. Surface soil is clay over 83 percent of the area, with silty clay loam at 12 percent. We plan around Roxton’s Houston Black clay, where no sandy area is mapped at that depth. These patterns guide planning but are not a sample from a specific Hackleman Street bore.

USDA soil survey, inside the Roxton city limitsWhat is mapped
Soil series mappedHouston Black 49 percent, Heiden 15 percent, Elbon 12 percent, Tinn 10 percent and Ferris 4 percent
Texture at the surfaceclay 83 percent, silty clay loam 12 percent and loam 3 percent
Texture about 40 inches downclay 87 percent and stratified silty clay loam to clay 12 percent
Engineering class about 40 inches downfat clay (CH) 87 percent and lean clay (CL) 12 percent
Average clay content about 40 inches down52 percent
Bedrock mapped within 60 inches7 percent of the area (0 percent hard rock, 7 percent weathered rock)
Seasonal water table within 60 inches14 percent of the area
Flood prone soils12 percent of the area
High corrosion risk for uncoated steel99 percent of the area

The soil survey maps bedrock within 60 inches in 7 percent of Roxton, all weathered; hard bedrock is not mapped at that depth. Seasonal water table within 60 inches and flood prone soils are mapped over 14 percent and 12 percent, respectively. Water in pits can call for pumping, and Denton Creek routes need channel planning. High steel corrosion risk covers 99 percent, so the line owner should consider casing and tracer wire materials. The geologic map names Ozan Formation, Late Cretaceous claystone, which can affect drilling resistance.

How do we drill Roxton clay along local streets?

Clay is the main drilling condition in Roxton. We adjust fluid and reaming steps for sticky soil, watch returns near pavement on FM 137, and expose marked utilities before the drill approaches them.

  1. With Houston Black clay mapped across 49 percent of Roxton, we use thinner fluid with polymer and open the hole in measured reaming stages.
  2. Heavy clay is common here, so on routes near FM 137 we watch fluid returns closely to avoid pressure lifting pavement.
  3. On clay routes near Hackleman Street, we pull pipe the same day the hole is opened, limiting time for the soil to grip the pipe.
  4. Denton Creek and Cane Creek bring wet ground considerations; we plan pits for possible water and set creek routes below the channel after jurisdiction checks.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What might a bore cross near FM 137 in Roxton?

FM 137 has 1.2 mapped roadway miles inside Roxton and FM 38 has 1.1. A state highway crossing needs a route and depth that account for the pavement and right of way; existing highway pavement is crossed by boring or tunneling, not an open trench. Hackleman Street is the longest named street at 1.05 miles, followed by Pecan Street at 0.84 and 2nd Street at 0.76. Wight Street adds 0.7 miles of mapped street to consider in local alignments.

CrossingTypeMapped extentWho has a say
FM 137State highway1.2 roadway miles insideState highway office
FM 38State highway1.1 roadway miles insideState highway office
Denton CreekStream1.42 channel miles insideChecked for Corps of Engineers jurisdiction
Cane CreekStream0.76 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Roxton or within 1 mile outside its limits, and no street and rail crossing is mapped in town. Denton Creek runs 1.42 channel miles through the city and Cane Creek 0.76; 10 mapped street crossings intersect named streams. No lake or pond is mapped within 1 mile. A planned creek bore needs channel depth planning, and the water crossing is checked for U.S. Army Corps of Engineers jurisdiction.

Who approves a Roxton bore in Lamar County?

Roxton is incorporated, so city streets such as Hackleman Street belong to the city. FM 137 and FM 38 are state highways, and work in their right of way needs a TxDOT utility permit. The utility owner submits through RULIS, the TxDOT Paris District reviews it, and we prepare the bore plan and profile for that filing. At an FM 137 crossing, cover is at least 60 inches for electric, communication, water and pressurized sewer lines. Existing highway pavement is bored or tunneled. Denton Creek crossings are checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near the City of Roxton water system?

The City of Roxton public water system uses purchased surface water and serves 538 people through 230 service connections. A water route near Hackleman Street needs a planned connection to that system. Electric service reported in Lamar County includes Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative and Lamar County Electric Cooperative Association; before a conduit bore along FM 137, we confirm which utility owns the line at that address.

Line ownerWhat it isSourceSize
City of RoxtonPublic water systemSurface water bought from another system230 connections, 538 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Fannin County Electric Cooperative and Lamar County Electric Cooperative AssociationElectric utilities reporting service in Lamar CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates place Roxton’s median housing year at 1977, which we keep in mind when planning underground routes near Pecan Street. They estimate 22 percent of housing was built before 1960, 45 percent from 1960 to 1999 and 33 percent in 2000 or later. That mix can mean replacement routes as well as new services. On a planned bore along 2nd Street, we hydrovac pothole every marked utility on the path before drilling near it; paint shows position, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

Do you cover Roxton and nearby Brookston?

Roxton is in Lamar County at an elevation of 511 feet and covers 0.86 square miles. ZIP code 75477 serves Roxton, and we use that local address detail when planning underground work along FM 137. Brookston is 5.6 miles north, Petty is 6.1 miles northwest and Toco is 8.7 miles northeast. Paris, the county seat and nearest larger city, is 13.3 miles northeast. Roxton is 235 road miles and a 4.8 hour drive from our Yukon, Oklahoma main office, which is part of planning the crew and equipment mobilization for a job near FM 137.

Places near Roxton

Which jobs call for a bore near 2nd Street in Roxton?

  • Highway crossing: An FM 137 bore follows the route, cover and casing conditions in the TxDOT permit instead of cutting existing pavement.
  • Water service: Plan a service connection to the City of Roxton system near Hackleman Street, with the route set around marked utilities.
  • Fiber conduit: A route along 2nd Street can pass beneath marked utilities after each one on the bore path is exposed by hydrovac potholing.
  • Creek crossing: A Denton Creek bore needs a profile below the channel and a jurisdiction check, with pits planned for possible water.
  • Street service: A Wight Street alignment can pass beneath pavement and driveways while bore pits sit in dirt on each side.
  • Electric conduit: For a route near FM 38, confirm the line owner for that address before planning the conduit bore.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near Wight Street in Roxton?

For a Roxton quote, send the address or map pin, what goes underground, pipe or conduit size, footage, and any sketch or plans. A route along Hackleman Street or across FM 137 helps us identify pavement, utility crossings and the permit path before setting the bore scope. A clear route helps us match the plan to the site.

A straight route through mapped Houston Black soil with known utility marks and no pavement or creek crossing is simpler to plan. Length, pipe size and the ground still matter. Sticky clay can call for staged reaming; a Denton Creek crossing adds channel and jurisdiction planning; and FM 137 pavement or utility exposures alter the bore details. Pit size, excavator time, sand backfill, emergency timing and mobilization from Yukon also affect the work, with Roxton 235 road miles from that yard.

Questions people ask about boring in Roxton

Does Trinity take directional boring jobs in Roxton, Lamar County, and who does the work?

Yes. Trinity takes directional boring work in Roxton and serves Lamar County with its own crews and partner drilling contractors vetted by Trinity. The Yukon office coordinates each job from the first call through the bore log, regardless of which crew is on site.

What ground will a bore meet in Roxton’s Houston Black soil?

The USDA soil survey maps Houston Black across 49 percent of Roxton, and clay makes up 87 percent of mapped texture at about 40 inches. Sticky clay can build on a reamer and grip pipe, so we use fluid suited to the soil and stage the reaming rather than opening the full hole at once.

Is bedrock mapped within 60 inches of the ground in Roxton?

Weathered bedrock is mapped within 60 inches across 7 percent of Roxton, while hard bedrock is not mapped at that depth. The geologic map identifies Ozan Formation claystone of Late Cretaceous age. A specific bore still needs site planning because the mapped patterns do not establish conditions at an exact location.

Who approves a bore under FM 137 in Roxton?

TxDOT reviews work in the FM 137 right of way through its Paris District. The utility owner submits the permit application in RULIS, and we prepare the bore plan and profile for that filing. The permit sets the route conditions, including the required cover and casing details for the line.

Can a line be bored under Denton Creek in Roxton?

A bore can be planned beneath Denton Creek, which runs 1.42 channel miles through Roxton. The route needs to stay below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Wet ground near the creek can also affect pit placement and pumping needs.

When planning a crossing near Denton Creek, who owns Roxton’s public water system, and where does its water come from?

The City of Roxton owns the public water system, which uses purchased surface water, and we factor that into planning crossings on FM 38. Roxton’s system serves 538 people through 230 service connections, so we account for existing utility connections when planning work along 2nd Street. For a proposed water line near FM 137, the route and connection point need to match the system and the line owner’s information.

How early should I request a Texas811 locate for a Roxton bore near Hackleman Street?

For a bore near Hackleman Street, submit the Texas811 locate request at least 48 hours before excavation begins, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. When a start near Harrison Avenue slips more than 14 days past the original notice, we submit a new request. Before continuing a crossing near Cane Creek, we refresh worn or moved marks through Texas811.

Does Roxton’s distance from Paris change a directional boring job?

Roxton is 13.3 miles from Paris and 235 road miles from Trinity’s Yukon, Oklahoma main office. That distance can affect mobilization planning for work near FM 38 or another local route. We assess the equipment, crew timing and job scope from the actual address rather than treating every Roxton bore alike.

What affects the cost of a directional bore under FM 137 in Roxton?

The route, length, pipe or conduit size, soil, utility crossings and pavement all shape the job. At FM 137, highway permit conditions and pavement affect the bore plan; Houston Black clay can require staged reaming, while a Denton Creek crossing adds channel planning. Pit work, excavator time, sand backfill and mobilization from Yukon also matter.

Where the Roxton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Roxton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Roxton, Texas

Type the address of your job in Roxton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Roxton

Same county: Reno · Blossom · Powderly · Deport · Sun Valley. All counties: Texas county list.