Cumby Texas Directional Boring: Crockett Loam, Interstate 30 and CPKC Track
Quick Answer: Interstate 30 is a major route for a utility crossing, and Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), in Cumby, Texas. Our Yukon, Oklahoma main office is 249 road miles away, with Main Street and the CPKC track among the local route features to plan around. The USDA soil survey maps heavy clay at about 40 inches, which can stick to a reamer and grip pipe. East Fork Turkey Creek adds a water crossing to consider on a route through the city.
Cumby bores at a glance
- Incorporated city in Hopkins County, Texas. Population 715 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 249 miles, about 5 hours of driving.
- Ground: Crockett soil is mapped on 96 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 100 percent of the area.
- Highways inside the boundary: Interstate 30, US 67, FM 275 and FM 499. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: CPKC (Kansas City Southern), with 4 mapped street and rail crossings.
- Named streams inside the boundary: East Fork Turkey Creek.
- Public water: City of Cumby, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near Main Street in Cumby?
Cumby is in Hopkins County, where the Census Bureau Vintage 2024 estimate puts the population at 715. For a route along Main Street or Mill Street, we install water, sewer, gas, electric conduit and fiber by directional boring, keeping pavement and driveways uncut. Trinity Boring Solutions takes work across Texas, including Cumby, and can discuss the route and line needed.
Our main office is in Yukon, Oklahoma, and Cumby work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Across the City of Cumby groundwater system and the electric providers reported in Hopkins County, our record has had no utility strike for over 25 years. We are a family business started in 1965, and we have done directional boring since 1982.

What is Crockett soil like to bore through in Cumby?
The USDA soil survey maps Crockett soil across 96 percent of Cumby, with Bazette making up the rest. Surface texture is loam across 96 percent of the mapped area, but at about 40 inches down the survey maps clay across 79 percent and clay loam across 20 percent. Average clay content at that depth is 42 percent, and sandy ground is not mapped there. For Cumby, we treat mapped soil patterns as planning information, not as test borings. For a bore near Main Street, the deeper clay can build up on the reamer and grip the pipe, so the drilling fluid and reaming sequence matter.
| USDA soil survey, inside the Cumby city limits | What is mapped |
|---|---|
| Soil series mapped | Crockett 96 percent and Bazette 4 percent |
| Texture at the surface | loam 96 percent and clay loam 4 percent |
| Texture about 40 inches down | clay 79 percent and clay loam 20 percent |
| Engineering class about 40 inches down | fat clay (CH) 90 percent and lean clay (CL) 10 percent |
| Average clay content about 40 inches down | 42 percent |
| Bedrock mapped within 60 inches | 100 percent of the area (0 percent hard rock, 100 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches across Cumby, with bedrock mapped within 40 inches across 24 percent; hard bedrock is not mapped within 60 inches. The Wills Point Formation, a Paleocene unit, is described as mostly clay with some siltstone and local sandy material. Seasonal water tables within 60 inches and flood prone soils are not mapped. High steel corrosion risk is mapped across the area, so the line owner should consider casing and tracer wire materials. The weathered ground may call for a slower soil bore, not a hard rock setup.
How do we bore the clay mapped in Cumby?
Crockett soil covers most of Cumby, and the USDA survey maps clay at about 40 inches. We plan the fluid, reaming and pull around that sticky ground and the route crossings.
- Crockett soil is mapped across most of Cumby, so we use fluid suited to sticky clay, ream in stages and plan to pull pipe before the hole closes.
- At a Main Street route, we hydrovac each marked utility before drilling near it; paint shows position, while a pothole reveals the line’s depth.
- Near Interstate 30, we track the drill head from the surface and log depth and pitch so the bore can follow its planned profile beneath pavement.
- For an East Fork Turkey Creek crossing, we plan the bore depth and route around the channel, then check during planning whether Corps jurisdiction applies.

What can a new line cross in Cumby near Interstate 30?
Interstate 30, US 67, FM 275 and FM 499 run inside Cumby, so the route determines whether a bore enters highway right of way. At Cumby, when our work passes beneath existing highway pavement, TxDOT rules call for boring or tunneling. Main Street is the longest named street at 0.79 miles in the city, followed by Mill Street at 0.75 miles and Donelton Street at 0.56 miles. Because Cumby is incorporated, we coordinate street crossings with the city, which owns Cumby’s city streets. A planned crossing can keep those paved routes intact, with pits set beyond the pavement.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 30 | Interstate | 1.9 roadway miles inside | State highway office |
| US 67 | US highway | 1.3 roadway miles inside | State highway office |
| FM 275 | State highway | 1.7 roadway miles inside | State highway office |
| FM 499 | State highway | 0.9 roadway miles inside | State highway office |
| CPKC (Kansas City Southern) | Railroad | 0.78 track miles inside | The railroad |
| East Fork Turkey Creek | Stream | 0.31 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Cedar Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Schooley Creek | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
The CPKC (Kansas City Southern) Greenville Subdivision has 0.78 track miles inside Cumby, and public records map 4 street and rail crossings in the city. A crossing route needs the railroad owner’s agreement. East Fork Turkey Creek runs 0.31 channel miles within city limits, and one mapped street crossing intersects a named stream. Cedar Creek lies 0.1 miles from the limits and Schooley Creek 0.6 miles away. In Cumby, we have no mapped lakes or ponds within one mile to account for during route planning. Creek alignment and access need to be considered before selecting a bore path.
Who approves a Cumby bore near CPKC (Kansas City Southern)?
For a bore under Interstate 30, US 67, FM 275 or FM 499, TxDOT is the highway authority and the Paris District reviews the utility permit. The utility that owns the line submits its application through TxDOT’s online RULIS system; we prepare the bore plan and profile for that filing and work under the owner’s permit. TxDOT rules set cover requirements by line type, including 60 inches below the lowest crossed grade for electric, communication and water lines at crossings. The CPKC (Kansas City Southern) track needs an agreement from its owner, and a creek crossing is checked for Army Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities may have lines in Hopkins County and Cumby?
The City of Cumby public water system uses groundwater wells and reports 413 service connections serving 685 people. Before a bore near those water lines, we hydrovac pothole marked utilities on the route to confirm their position and depth. Oncor Electric Delivery Company, Southwestern Electric Power, Farmers Electric Cooperative and Wood County Electric Cooperative report electric service in Hopkins County. The specific electric line owner is confirmed before planning a conduit bore, including on a route along FM 275.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Cumby | Public water system | Groundwater wells | 413 connections, 685 people served |
| Oncor Electric Delivery Company, Southwestern Electric Power, Farmers Electric Cooperative and Wood County Electric Cooperative | Electric utilities reporting service in Hopkins County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Cumby’s median housing year at 1966; 42 percent of homes were built before 1960, 49 percent from 1960 to 1999 and 9 percent in 2000 or later. That mix can mean work on either older services or newer connections near Main Street. Before the drill approaches marked lines from the water system or an electric provider, we expose them with hydrovac potholing because surface paint shows position, not depth.

Where does Trinity take boring work around Campbell and Cumby?
Cumby covers 0.96 square miles in Hopkins County at an elevation of 636 feet, and ZIP code 75433 serves the city. Campbell is 6.8 miles west, Commerce is 8.1 miles northwest, and Sulphur Springs, the county seat, is 13.0 miles east. Commerce is the nearest larger city. From our Yukon, Oklahoma main office, the drive to Cumby is 249 road miles and about 5.0 hours. We take work in Cumby, Campbell and rural sites in the surrounding area, with mobilization planned around that distance.
Places near Cumby
- Directional boring in Campbell: 6.8 miles west
- Directional boring in Commerce: 8.1 miles northwest
- Directional boring in Neylandville: 11.1 miles west
- Directional boring in Lone Oak: 11.3 miles southwest
- Directional boring in Sulphur Springs: 13 miles east
What kinds of bores could serve Mill Street in Cumby?
- Highway crossing: A bore beneath Interstate 30 or US 67 avoids cutting the paved route, with the utility owner’s TxDOT permit guiding the work.
- Water service: A new connection near the City of Cumby groundwater system needs a route checked against existing lines and hydrovac potholes before drilling.
- Fiber route: Fiber conduit along Main Street can pass below pavement, with pits placed in dirt beyond the section being crossed.
- Rail crossing: A route beneath the CPKC Greenville Subdivision requires the railroad owner’s agreement and a plan for the crossing conditions.
- Creek crossing: A bore under East Fork Turkey Creek needs a route and depth plan, with jurisdiction checked during planning.
- Street connection: A service near Mill Street can be bored beneath pavement, with the route checked for buried utilities before the drill advances.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Cumby bore near East Fork Turkey Creek?
Start with a map pin or address, especially near East Fork Turkey Creek, where a small route shift can change the crossing and access plan. For a Cumby project, tell us what we will put in the ground, along with the pipe or conduit size and footage. A sketch or plans help us check the route against nearby streets, the CPKC track and any creek crossing.
The Crockett clay mapped at about 40 inches matters first because sticky cuttings can slow reaming and complicate the pipe pull. Price also reflects bore length, pipe or conduit size, utilities to expose, and crossings such as Interstate 30, the CPKC track or East Fork Turkey Creek. Pavement, pits, excavator time and sand backfill affect the work plan. Mobilization also reflects Cumby’s 249 road miles from Yukon, and high profile or emergency work can add scope.
Questions people ask about boring in Cumby
Does Trinity take directional boring work in Cumby and Hopkins County, and who staffs it?
Yes. We take directional boring work in Cumby and Hopkins County, with our own crews and vetted partner drilling contractors staffing jobs from satellite yards. Our main office is in Yukon, Oklahoma, and you work with Trinity from the first call through the bore log, whichever crew is on site. Main Street and Interstate 30 are examples of local route features we can plan around.
What ground should I expect in Cumby near Crockett soil?
The USDA soil survey maps Crockett soil across 96 percent of Cumby. Surface soil is mostly loam, while about 40 inches down clay is mapped across 79 percent and average clay content is 42 percent. That sticky material can collect on a reamer and grip pipe, so a bore near Mill Street needs a controlled fluid and staged reaming plan.
Will a Cumby bore encounter bedrock near Main Street?
Weathered bedrock is mapped within 60 inches across Cumby, and bedrock is mapped within 40 inches across 24 percent of the area. Hard bedrock is not mapped within 60 inches. The Wills Point Formation is described as mostly clay with siltstone and some sandy material, so we plan for weathered ground but check the actual route conditions.
Who approves a Cumby utility bore under Interstate 30?
TxDOT handles utility permits for Interstate 30 and the other state controlled highways in Cumby, with review by the TxDOT Paris District. The utility that owns the line files through RULIS, and we prepare the bore plan and profile for the owner’s application. TxDOT rules require boring or tunneling beneath existing highway pavement.
What does a Cumby bore under CPKC (Kansas City Southern) require?
A bore beneath the CPKC (Kansas City Southern) Greenville Subdivision needs an agreement from the railroad that owns the track. For Cumby crossings, we use the agreement to set conditions for casing, depth, and flagging before work starts. With 0.78 track miles inside Cumby, the rail route has to be identified early enough to shape the bore plan.
Can you bore a line under East Fork Turkey Creek in Cumby?
A bore under East Fork Turkey Creek can be planned, subject to route conditions and the crossing review. The creek runs 0.31 channel miles inside Cumby, and planning checks whether the U.S. Army Corps of Engineers has jurisdiction. We set the alignment and depth to pass below the channel while keeping the creek bank uncut.
Does Trinity serve Campbell as well as Cumby?
Yes. We take work in Campbell, which is 6.8 miles west of Cumby, as well as rural sites outside the city limits. Our Yukon office is 249 road miles from Cumby, so distance is part of mobilization planning. A route near the Campbell road or another rural location can be discussed with its address or map pin.
How early should I request a Cumby bore locate near Main Street?
For a bore near Main Street, request a Texas811 locate at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If our start in Cumby moves more than 14 days past the original notice, we submit a new request. If marks are worn or moved in Cumby, we have them refreshed through Texas811 before our work continues.
What affects the cost of a Cumby bore crossing Interstate 30?
The price depends on the job route and scope, not just its length. Crockett clay can affect drilling time, while an Interstate 30 crossing may involve highway permit planning and pavement requirements. Pipe size, utilities to expose, pavement, pits, creek or rail crossings, backfill and mobilization from Yukon also shape the work. We assess those details for the specific route.
Where the Cumby facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Cumby
- U.S. Census Bureau, TIGER/Line 2024: Cumby boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Cumby
- U.S. Census Bureau, American Community Survey 2019 to 2023: Cumby housing units and year built
- Macrostrat geologic map compilation: map units under Cumby
- U.S. EPA Safe Drinking Water Information System: public water systems serving Cumby
- U.S. Department of Transportation, North American Rail Network: track owners in Hopkins County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hopkins County
- U.S. Geological Survey, Elevation Point Query Service: Cumby elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Cumby
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Cumby
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Cumby, Texas
Type the address of your job in Cumby. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Cumby
Same county: Como · Tira. All counties: Texas county list.
