trinityboringsolutions.com

Sulphur Springs Texas Directional Boring: Crockett Loam, White Oak Creek And CPKC Rail

Quick Answer: Crockett loam holds a bore hole, and we take directional boring, also called horizontal directional drilling (HDD), beneath Sulphur Springs streets and White Oak Creek in Texas. From our Yukon, Oklahoma main office, Sulphur Springs is 262 road miles away, with Interstate 30 among the routes a bore may cross. Clay makes up 66 percent of mapped soil at about 40 inches, where sticky cuttings can build on a reamer and grip pipe. A Crockett soil bore calls for controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Sulphur Springs bores at a glance

  • County seat of Hopkins County, Texas. Population 16,891 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 262 miles, about 5.3 hours of driving.
  • Ground: Crockett soil is mapped on 34 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 37 percent of the area.
  • Highways inside the boundary: Interstate 30, US 67, Texas State Highway 11, Texas State Highway 19 and Texas State Highway 154. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: CPKC (Kansas City Southern), a short line railroad (reporting mark NTRW) and a short line railroad (reporting mark NTRW) (line shown as out of service), with 37 mapped street and rail crossings.
  • Named streams inside the boundary: White Oak Creek, Rock Creek, Town Branch and Horse Pen Creek.
  • Public water: City of Sulphur Springs, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Sulphur Springs and Hopkins County?

Crockett loam is a leading named soil series in Sulphur Springs, and its clay can make a bore sticky. Trinity Boring Solutions takes directional boring work across Hopkins County, where the Census Bureau Vintage 2024 estimate puts the population at 16,891. We install water, sewer, gas, electric conduit and fiber on routes such as Houston Street and near White Oak Creek, with the bore plan set for the site.

Our main office is in Yukon, Oklahoma, and Sulphur Springs work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa. The 1965 family business has drilled since 1982; a typical Sulphur Springs crossing near White Oak Creek is shorter and smaller than that benchmark.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Sulphur Springs and Crockett loam?

The USDA soil survey maps Crockett soil across 34 percent of Sulphur Springs and Freestone across 30 percent. Crockett loam, 1 to 3 percent slopes, accounts for 24 percent of mapped land; Freestone fine sandy loam, 1 to 3 percent slopes, accounts for 30 percent. At about 40 inches, clay is mapped under 66 percent of the area, with an average clay content of 46 percent. We treat Sulphur Springs mapped patterns as planning guidance, not test borings for a proposed underground route. The clay can stick to a reamer and tighten around pipe, so a route near Crockett soils needs a controlled drilling fluid plan.

USDA soil survey, inside the Sulphur Springs city limitsWhat is mapped
Soil series mappedCrockett 34 percent, Freestone 30 percent, Woodtell 8 percent, Nahatche 5 percent and Lufkin 3 percent
Texture at the surfaceloam 45 percent, fine sandy loam 30 percent and clay loam 6 percent
Texture about 40 inches downclay 66 percent, clay loam 12 percent and loam 5 percent
Engineering class about 40 inches downfat clay (CH) 75 percent and lean clay (CL) 9 percent
Average clay content about 40 inches down46 percent
Bedrock mapped within 60 inches37 percent of the area (0 percent hard rock, 37 percent weathered rock)
Seasonal water table within 60 inches38 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel81 percent of the area

The USDA soil survey maps weathered bedrock within 60 inches across 37 percent of Sulphur Springs, with typical bedrock depth at 48 inches. That can slow a bore where the drill meets firmer material. Seasonal water tables are mapped within 60 inches across 38 percent, so pits may need pumping. Flood prone soils cover 5 percent, a consideration near White Oak Creek. In Sulphur Springs, high steel corrosion risk is mapped across 81 percent, so we advise the line owner to consider casing and tracer wire materials. The Wilcox Group, undivided, is a Paleogene map unit, described as mostly mudstone with sand, lignite and other materials.

How do we plan to bore through clay in Sulphur Springs when mapped patterns are not test borings?

Sulphur Springs has clay mapped below loam and fine sandy loam, including around Crockett soils. We adjust fluid and reaming to limit sticky cuttings and keep the bore controlled near streets and pavement.

  1. In Crockett loam, sticky cuttings can collect on the reamer, so we use thinner fluid with polymer and enlarge the bore in stages before pulling pipe.
  2. Where the 40 inch soil map shows heavy clay, we watch fluid returns closely; pressure near Interstate 30 pavement must not lift the surface.
  3. With seasonal water tables mapped within 60 inches across 38 percent of the city, small pits near White Oak Creek can be pumped if water enters.
  4. Near Houston Street, we expose marked utilities by hydrovac before drilling close; a walkover locator tracks the head while depth and pitch are logged.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

Where might a Sulphur Springs bore pass under CPKC (Kansas City Southern)?

Interstate 30 has 14.2 mapped roadway miles inside Sulphur Springs; US 67 has 13.8. Texas State Highway 11, Texas State Highway 19 and Texas State Highway 154 also run within city limits, alongside FM 2285 and Loop 301. A route can also meet long city streets: Hillcrest Drive spans 5.45 miles, Houston Street 3.03 miles and Davis Street 2.94 miles. A bore plan can keep those paved surfaces uncut, with entry and exit pits placed in dirt where the site allows.

CrossingTypeMapped extentWho has a say
Interstate 30Interstate14.2 roadway miles insideState highway office
US 67US highway13.8 roadway miles insideState highway office
Texas State Highway 11State highway9.3 roadway miles insideState highway office
Texas State Highway 19State highway7.5 roadway miles insideState highway office
Texas State Highway 154State highway6.2 roadway miles insideState highway office
FM 2285State highway4.6 roadway miles insideState highway office
Loop 301State highway2.7 roadway miles insideState highway office
FM 2297State highway1.4 roadway miles insideState highway office
FM 1870State highway1.1 roadway miles insideState highway office
CPKC (Kansas City Southern)Railroad6.49 track miles insideThe railroad
a short line railroad (reporting mark NTRW)Railroad5.77 track miles insideThe railroad
a short line railroad (reporting mark NTRW) (line shown as out of service)Railroad0.34 track miles insideThe railroad
White Oak CreekStream4.2 channel miles insideChecked for Corps of Engineers jurisdiction
Rock CreekStream3.54 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

CPKC (Kansas City Southern) has 6.49 track miles in Sulphur Springs, and an NTRW short line has 5.77 track miles, plus a mapped 0.34 mile segment shown out of service. There are 37 mapped street and rail crossings in the city. White Oak Creek runs 4.2 channel miles, and Rock Creek runs 3.54; 22 street crossings of named streams are mapped. Lake Sulphur Spring and Century Lake are also inside city limits, so a proposed route near water needs site specific planning.

Who approves a Sulphur Springs bore near Interstate 30?

Interstate 30, US 67 and the Texas state highways in Sulphur Springs are TxDOT routes. Work in their right of way needs a utility permit reviewed by the TxDOT Paris District; the line owning utility submits through RULIS, while we prepare the bore plan and profile. TxDOT rules call for boring or tunneling beneath existing highway pavement, and the permit sets applicable cover requirements. A CPKC or NTRW track crossing needs an agreement with the railroad that owns that track. For a White Oak Creek crossing, planning checks whether the U.S. Army Corps of Engineers has jurisdiction. City streets such as Davis Street are under city control.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Sulphur Springs water system?

The City of Sulphur Springs public water system uses surface water and reports 13,166 service connections serving 16,243 people. That makes route and tie in details important around Houston Street and other developed blocks. Oncor Electric Delivery Company, Southwestern Electric Power, Farmers Electric Cooperative and Wood County Electric Cooperative report electric service in Hopkins County. We confirm the owner of the specific electric line before planning a conduit bore, since the county list does not identify the provider at every address.

Line ownerWhat it isSourceSize
City of Sulphur SpringsPublic water systemSurface water13,166 connections, 16,243 people served
Oncor Electric Delivery Company, Southwestern Electric Power, Farmers Electric Cooperative and Wood County Electric CooperativeElectric utilities reporting service in Hopkins CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median Sulphur Springs housing year at 1976. The estimates show 27 percent of homes built before 1960, 54 percent from 1960 to 1999 and 19 percent in 2000 or later. A replacement route near Davis Street may have older buried lines to work around, while a new service on a newer block still needs a clear path. We hydrovac expose marked utilities on the bore route before drilling near them; paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Do you cover Sulphur Springs, Como and nearby Hopkins County places?

Sulphur Springs is the incorporated county seat of Hopkins County, covering 20.54 square miles at an elevation of 502 feet. We use ZIP code 75482 to identify Sulphur Springs when organizing underground work planning. Nearby Como is 9.9 miles southeast, Cumby is 13.0 miles west and Tira is 13.6 miles north. Greenville, the nearest larger city listed, is 28.8 miles west. Our Yukon, Oklahoma main office is 262 road miles away, a 5.3 hour drive. That distance is part of planning mobilization for a route near Interstate 30 or one of Sulphur Springs’s creeks.

Places near Sulphur Springs

What would we bore near Houston Street in Sulphur Springs?

  • Highway crossing: A route beneath Interstate 30 can be planned as a bore, with the utility owner handling the TxDOT right of way permit.
  • Water service: A connection near the City of Sulphur Springs water system can be routed to avoid marked lines along Houston Street.
  • Fiber conduit: A run along Hillcrest Drive can pass beneath paved access points without cutting the street surface.
  • Creek crossing: A proposed line beneath White Oak Creek needs a route planned for the channel and a check for federal jurisdiction.
  • Rail crossing: A route beneath CPKC track in Sulphur Springs requires coordination with the railroad that owns the track.
  • Street replacement: A sewer or water line near Davis Street can be bored between pits, limiting open cuts through pavement.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a Sulphur Springs bore near Hillcrest Drive?

Start with where the route begins, such as an address or map pin near Hillcrest Drive. Tell us what is going in, such as water service by Houston Street, then give the pipe or conduit size and the footage. A sketch or plans showing the route toward White Oak Creek or an Interstate 30 crossing help us see the scope.

A short route in open ground near Hillcrest Drive may be simpler to plan than a bore through Crockett clay under pavement. Length, pipe size, soil and rock, exposed utilities, concrete, creek crossings, pits and backfill all affect the work. A CPKC crossing adds coordination with the track owner. Interstate 30 work has permit and bore profile needs. The 262 road miles from Yukon also affect crew mobilization, as can emergency timing or a high profile site.

Questions people ask about boring in Sulphur Springs

Does Trinity take directional boring jobs in Sulphur Springs and Hopkins County, and who staffs them?

Yes. We take work in Hopkins County and serve Sulphur Springs with our crews and vetted drilling contractor partners. The customer works with Trinity from the first call through the bore log, whichever crew is at the site. A proposed route near Houston Street helps us understand the local scope.

Can a line be bored under White Oak Creek in Sulphur Springs?

A bore under White Oak Creek can be considered after the route, channel conditions and access are reviewed. The creek runs 4.2 channel miles within Sulphur Springs, and planning checks whether the U.S. Army Corps of Engineers has jurisdiction. A site plan helps establish the crossing path and pit locations.

Who runs Sulphur Springs’ public water system, and what water source should we account for when planning an underground crossing?

The City of Sulphur Springs owns the public water system and uses surface water, a utility fact we account for when planning underground work. Its reported service includes 13,166 connections and 16,243 people. Those figures help frame a proposed connection near Houston Street, but the line owner and tie in point still need confirmation for the specific site.

Which electric companies report service in Hopkins County for a Sulphur Springs conduit bore?

Oncor Electric Delivery Company, Southwestern Electric Power, Farmers Electric Cooperative and Wood County Electric Cooperative report electric service in Hopkins County. The specific line owner must be confirmed before a conduit bore near Davis Street is planned, since those county records do not assign a provider to every Sulphur Springs address.

Who controls Davis Street in Sulphur Springs, and does a bore require cutting it?

Davis Street is a city street because Sulphur Springs is incorporated. Directional boring can place a line beneath pavement between work pits, avoiding an open cut across the street when the site and route allow. The road alignment and existing utilities still need to be checked before the bore is laid out.

How old are buried lines near Houston Street in Sulphur Springs, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1976, with 27 percent of homes built before 1960. Older blocks near Houston Street may have existing utilities on a replacement route. We expose marked lines before drilling nearby, because locate marks show position rather than depth.

How far is Sulphur Springs from Trinity’s Yukon office, and does Greenville change the job?

Sulphur Springs is 262 road miles from our Yukon, Oklahoma main office, about a 5.3 hour drive. Greenville is 28.8 miles west of Sulphur Springs. The Yukon distance can affect mobilization planning for a bore near Interstate 30, while the route, access and work scope determine what equipment and crew time are needed.

How much notice does Texas811 need for a Sulphur Springs bore near Hillcrest Drive, and what if marks move?

For a bore near Hillcrest Drive, Texas811 needs notice at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If our start in Sulphur Springs slips more than 14 days past the original notice, we make a new request before boring. Before continuing underground work in Sulphur Springs, we have worn or moved marks refreshed through Texas811.

What affects the cost of a directional bore near Interstate 30 in Sulphur Springs?

The route and work scope drive the price, not just footage. Near Interstate 30, permitting and pavement crossings matter; Crockett clay can affect drilling and reaming. Pipe size, exposed utilities, creek or rail crossings, pits, concrete, backfill, emergency timing and mobilization from Yukon can also change the work required.

Where the Sulphur Springs facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Sulphur Springs

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Sulphur Springs, Texas

Type the address of your job in Sulphur Springs. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Sulphur Springs

All counties: Texas county list.