Emory Texas Directional Boring: Wolfpen Soil, Sandy Creek and US 69
Quick Answer: In Emory, the USDA soil survey maps Wolfpen loamy fine sand across 48 percent of the area, with sandy clay loam common at about 40 inches below the surface. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for routes beneath Sandy Creek and other local obstacles. Emory is 261 road miles from our Yukon, Oklahoma main office, with US 69 marking a local route to plan around. At about 40 inches, 48 percent of mapped ground is sandy clay loam, which can hold a bore while sticky clay makes reaming and pipe pullback more demanding.
Emory bores at a glance
- County seat of Rains County, Texas. Population 1,390 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 261 miles, about 5.3 hours of driving.
- Ground: Wolfpen soil is mapped on 48 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 69, Texas State Highway 19, Texas State Highway 276, FM 2795 and FM 275. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Sandy Creek and Glade Creek.
- Public water: City of Emory, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Sandy Creek in Emory?
Trinity Boring Solutions takes directional boring work in Emory, Rains County, for water, sewer, gas, electric conduit and fiber along routes such as Quitman Street and US 69. The top five feet in Emory are mapped mainly as Wolfpen loamy fine sand, with finer soil below. The Census Bureau Vintage 2024 estimate puts the population at 1,390, so a planned route may serve a small town address or a longer connection outside the central streets.
Our main office is in Yukon, Oklahoma, and Emory work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Emory routes from Sandy Creek to a service connection, our equipment covers 3/4 inch service lines through 48 inch casing, from short service bores to large casing work. Trinity is a family business started in 1965, with directional boring work dating to 1982.

What kind of ground does Wolfpen soil mean for a bore in Emory?
Emory is mapped mainly as Wolfpen soil, especially Wolfpen loamy fine sand, which covers 48 percent of the mapped area, while Freestone accounts for 22 percent and Woodtell for 21 percent. The USDA soil survey maps loamy fine sand at the surface across 49 percent of the area. At about 40 inches below ground, sandy clay loam is mapped across 48 percent, clay across 28 percent and clay loam across 21 percent. These are mapped soil patterns, not test borings, so the actual Quitman Street route still needs field checks.
| USDA soil survey, inside the Emory city limits | What is mapped |
|---|---|
| Soil series mapped | Wolfpen 48 percent, Freestone 22 percent, Woodtell 21 percent and Annona 5 percent |
| Texture at the surface | loamy fine sand 49 percent, loam 28 percent and fine sandy loam 22 percent |
| Texture about 40 inches down | sandy clay loam 48 percent, clay 28 percent and clay loam 21 percent |
| Engineering class about 40 inches down | fat clay (CH) 50 percent and clayey sand (SC) 48 percent |
| Average clay content about 40 inches down | 36 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 72 percent of the area |
| Flood prone soils | 2 percent of the area |
| High corrosion risk for uncoated steel | 50 percent of the area |
The USDA map does not place bedrock within five feet across Emory; the mapped Wilcox Group, of Paleogene age, includes mudstone and sand, so deeper material may change the cut. A seasonal water table is mapped within 60 inches across 72 percent of the area, which can mean wet entry pits. Flood prone soils cover 2 percent, including ground to consider near Sandy Creek. High steel corrosion risk is mapped across 50 percent, so the line owner should weigh casing and tracer wire materials; the survey also maps an average clay content of 36 percent at about 40 inches.
How do we drill Emory’s sandy clay loam?
For Emory’s sandy clay loam and Wolfpen loamy fine sand, we match the fluid and reaming plan to the changing ground, then track the bore beneath the chosen route.
- In Emory’s sandy clay loam, we use a measured fluid plan and staged reaming so sticky clay does not build up on the reamer or grip the pipe.
- Where Wolfpen loamy fine sand dominates, we support the bore wall with drilling fluid and have the pipe ready before the final reaming pass.
- Because seasonal water tables are mapped within 60 inches across 72 percent of Emory, we keep pits small and pump them if groundwater collects.
- Before a drill approaches a marked line on a Ravine Street route, we expose it with hydrovac potholing; a walkover locator then tracks the head and logs depth and pitch.

Where might a line go under Quitman Street in Emory?
In Emory, a route beneath US 69, Texas State Highway 19 or Texas State Highway 276 needs a plan that keeps the highway surface intact. US 69 has 3.1 mapped roadway miles inside the city, State Highway 19 has 2.4 and State Highway 276 has 0.6. Quitman Street is the longest named street at 1.79 miles; Texas Street measures 1.41 miles and Ravine Street 1.26 miles. Those street lengths help locate a route, but each bore still depends on its exact crossing and access points.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 69 | US highway | 3.1 roadway miles inside | State highway office |
| Texas State Highway 19 | State highway | 2.4 roadway miles inside | State highway office |
| Texas State Highway 276 | State highway | 0.6 roadway miles inside | State highway office |
| FM 2795 | State highway | 0.4 roadway miles inside | State highway office |
| FM 275 | State highway | 0.1 roadway miles inside | State highway office |
| Sandy Creek | Stream | 1.71 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Glade Creek | Stream | 0.15 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bear Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Magee Branch | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
| Highland Lake | Lake or pond | 17 acres, nearby | Checked for Corps of Engineers jurisdiction |
Public records map no railroad inside Emory or within one mile, and no mapped street and rail crossings, so there is no local track route to plan around. Sandy Creek runs 1.71 channel miles inside the city, and mapped streets cross named streams at 7 locations. Glade Creek adds 0.15 channel miles. Highland Lake, a 17 acre lake, is within one mile but outside city limits. For a Sandy Creek crossing, the route and creek conditions need review during planning.
Who approves a US 69 bore in Emory through the TxDOT Paris District?
US 69 and the state routes through Emory are under the Texas Department of Transportation, and the TxDOT Paris District reviews utility work in Rains County. The utility owner, not the drilling contractor, applies through TxDOT’s online RULIS system; we prepare the bore plan and profile for that owner’s application. For Texas State Highway 19, we follow TxDOT’s requirement to bore or tunnel beneath existing highway pavement. Electric and communication lines crossing a highway need at least 60 inches of cover below the lowest crossed grade, while water lines need 60 inches; the permit can set another depth. Emory city streets belong to the city, and any Sandy Creek crossing is checked for federal water jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines already in Emory and Rains County?
The City of Emory owns the public water system, which uses surface water and reports 3,588 service connections serving 3,762 people. Electric service reported in Rains County includes Southwestern Electric Power, Texas New Mexico Power, Farmers Electric Cooperative and Wood County Electric Cooperative. Those records do not identify the provider at every Emory address, so we confirm the line owner before planning an electric conduit bore near the city water system.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Emory | Public water system | Surface water | 3,588 connections, 3,762 people served |
| Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative and Wood County Electric Cooperative | Electric utilities reporting service in Rains County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Emory’s median housing year at 1981: 23 percent of homes were built before 1960, 54 percent from 1960 to 1999 and 23 percent in 2000 or later. That mix can mean replacement work as well as new services along Ravine Street. We hydrovac pothole each marked utility on the bore path before drilling near it; for a proposed line beneath Ravine Street, paint alone does not show the line’s depth.

How far is Emory from Sulphur Springs and our Yukon yard?
Emory is the Rains County seat, at an elevation of 473 feet and within 1.96 square miles, with ZIP code 75440. Point is 7.0 miles northwest, East Tawakoni is 9.9 miles west, Alba is 10.0 miles southeast, Yantis is 11.5 miles east and Lone Oak is 13.0 miles northwest. The nearest larger city, Sulphur Springs, is 20.4 miles northeast. From the Yukon yard, Emory is 261 road miles and a 5.3 hour drive, which is part of planning crew mobilization for a Clark Drive or Sandy Creek route.
Places near Emory
- Directional boring in Point: 7 miles northwest
- Directional boring in East Tawakoni: 9.9 miles west
- Directional boring in Alba: 10 miles southeast
- Directional boring in Yantis: 11.5 miles east
- Directional boring in Lone Oak: 13 miles northwest
- Directional boring in Sulphur Springs: 20.4 miles northeast
What kinds of bores come up near Texas Street in Emory?
- Highway crossing: A route beneath US 69 needs a bore plan that accounts for the highway pavement and the utility owner’s TxDOT permit.
- Water service: A connection near the City of Emory water system needs the existing line owner confirmed before the new route is set.
- Fiber conduit: A run along Texas Street can use a bore to pass beneath pavement and keep the surface uncut.
- Creek crossing: A Sandy Creek route needs depth planning beneath the channel and a check for federal water jurisdiction during planning.
- Street crossing: A Ravine Street service can pass beneath the street while marked utilities are exposed along the bore path.
- Drainage route: A bore near Glade Creek can avoid an open cut across the mapped channel and its banks.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Clark Drive bore in Emory?
For a Clark Drive bore, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help us place the route. The main local detail is often whether the work crosses a street, US 69 or Sandy Creek, since each can change access and the bore plan.
The price follows the specific Emory route, not one standard scope. Ground matters: Wolfpen loamy fine sand and the mapped clay below it call for different drilling plans. Crossings matter: US 69, Sandy Creek, pavement and marked utilities can add planning, potholing or pit work. Logistics matter too: Emory is 261 road miles from Yukon, and the required equipment, excavator time, backfill and emergency timing also affect the job.
Questions people ask about boring in Emory
Does Trinity Boring Solutions take directional boring jobs in Emory and Rains County?
Yes. We take directional boring work in Emory and across Texas, with our own crews and vetted partner contractor yards supporting the work. When planning Sandy Creek crossings, we remain your contact from the first call through the bore log, whatever crew handles the work. A route near Sandy Creek still gets planned around its actual ground and crossing.
Who approves a bore under US 69 in Emory, and which state office reviews it?
The Texas Department of Transportation handles work on US 69, and its Paris District reviews the utility permit for Emory in Rains County. The utility owner files through TxDOT’s online RULIS system, while we prepare the bore plan and profile. Highway pavement is bored or tunneled beneath rather than crossed by open trench.
Can a line be bored under Sandy Creek in Emory?
A bore can be planned beneath Sandy Creek, which has 1.71 channel miles inside Emory. The route needs depth planning to stay below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Ground conditions and access at the selected entry and exit points also shape the plan.
Who runs Emory’s public water system in Rains County, and where does its water come from?
The City of Emory owns the public water system, and its source is surface water. For Emory, we use public records listing 3,588 service connections and 3,762 people served to plan underground utility coordination. For a bore near the system, we confirm the existing line locations before drilling, since the records do not show the depth of a particular water line.
Which electric providers report service in Emory and Rains County, and who confirms conduit specs?
Southwestern Electric Power, Texas New Mexico Power, Farmers Electric Cooperative and Wood County Electric Cooperative report electric service in Rains County. The line owner for a particular Emory address must be confirmed before a conduit bore, and that owner can confirm the conduit specifications. A route beside US 69 may also need a TxDOT utility permit.
Does the city or county control Ravine Street in Emory, and does a bore require a cut?
Emory is incorporated, so Ravine Street is a city street. A directional bore can pass beneath it without cutting the street surface, with entry and exit pits placed off the pavement where the site allows. The route still needs marked utilities exposed before the drill approaches them.
Can I call Trinity after hours about an urgent bore on Ravine Street in Emory?
Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, including for an urgent Ravine Street bore. We provide 24 hour emergency response, and the route details, nearby marked utilities and access for equipment help determine the next steps.
How much notice does Texas811 need for a Quitman Street bore in Emory, and what about the marks?
For a Quitman Street excavation in Emory, Texas law requires a locate request at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. On Texas State Highway 276 work, if our start slips more than 14 days past the original notice, we submit a new request. Before continuing boring along Clark Drive, we have worn or moved marks refreshed through Texas811.
What affects the cost of directional boring under US 69 in Emory?
The Emory job scope sets the price. Factors include bore length, pipe or conduit size, Wolfpen soil and clay conditions, utilities to expose, pavement, creek crossings, pits, backfill and equipment time. A US 69 crossing adds highway planning, while mobilization also reflects the 261 road miles from the Yukon yard.
Where the Emory facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Emory
- U.S. Census Bureau, TIGER/Line 2024: Emory boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Emory
- U.S. Census Bureau, American Community Survey 2019 to 2023: Emory housing units and year built
- Macrostrat geologic map compilation: map units under Emory
- U.S. EPA Safe Drinking Water Information System: public water systems serving Emory
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Rains County
- U.S. Geological Survey, Elevation Point Query Service: Emory elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Emory
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Emory
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Emory, Texas
Type the address of your job in Emory. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Emory
All counties: Texas county list.
