Point Texas Directional Boring: Crockett Loam, US 69 and Shuffle Creek
Quick Answer: Point is an incorporated small city, so 1st Street belongs to the city; we take directional boring, also called horizontal directional drilling (HDD), for routes beneath US 69 and around Shuffle Creek. From the Yukon, Oklahoma main office, Point is 254 road miles away, and US 69 access shapes mobilization. USDA maps show Crockett soil dominates, with clay at about 40 inches that can cling to tooling and pipe. That ground calls for staged reaming and a close watch on returns near pavement along Industrial Boulevard.
Point bores at a glance
- Incorporated city in Rains County, Texas. Population 817 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 254 miles, about 5.1 hours of driving.
- Ground: Crockett soil is mapped on 95 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 98 percent of the area.
- Highways inside the boundary: US 69 and FM 514. State permit office: TxDOT Paris District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Shuffle Creek and Rice Branch.
- Public water: City of Point, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring along 1st Street in Point?
Point is an incorporated small city in Rains County, so its public streets, including 1st Street, belong to the city. At 817 residents, Point’s Census Bureau Vintage 2024 estimate helps us size underground work planning for the city. We install water, sewer, gas, electric conduit and fiber on routes serving homes and businesses along 1st Street, Locust Street and Industrial Boulevard.
Our main office is in Yukon, Oklahoma, and Point work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore runs roughly 4,100 feet with 48 inch casing beneath the Arkansas River in Tulsa, showing the range behind a shorter Point route from US 69 to a service connection. Trinity is a family business started 1965, and we have done directional boring since 1982; Crockett clay calls for matching the reaming plan to local ground.

What is Point ground like in Crockett soil?
The USDA soil survey maps Crockett soil across 95% of Point, mostly Crockett loam, with the named map units split between 68% at 1 to 3 percent slopes and 25% at 2 to 5 percent slopes, eroded. The surface is loam across 95% of the mapped area, but at about 40 inches the survey maps clay across 73% and clay loam across 25%; average clay content there is 41%. Those patterns are not test borings, but they point to a sticky reamer and a hole that can grip pipe.
| USDA soil survey, inside the Point city limits | What is mapped |
|---|---|
| Soil series mapped | Crockett 95 percent and Bazette 3 percent |
| Texture at the surface | loam 95 percent and clay loam 5 percent |
| Texture about 40 inches down | clay 73 percent and clay loam 25 percent |
| Engineering class about 40 inches down | fat clay (CH) 96 percent and lean clay (CL) 3 percent |
| Average clay content about 40 inches down | 41 percent |
| Bedrock mapped within 60 inches | 98 percent of the area (0 percent hard rock, 98 percent weathered rock) |
| Seasonal water table within 60 inches | 1 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
Public soil mapping places weathered bedrock within 60 inches across 98% of Point, with typical depth 47 inches; hard bedrock is not mapped in that interval. That suggests a soil bit may meet softer weathered material rather than a hard rock layer, though the transition can affect steering. Seasonal water table and flood prone soils each appear in 1% of the mapped area, so Shuffle Creek still merits route and depth planning. High steel corrosion risk covers 100% of mapped area; the Cenozoic Smectitic Clay Decomposition Residuum and Paleocene Wills Point Formation both include clay, so casing and tracer wire choices belong with the line owner.
How do crews handle clay on a Point bore?
For Point routes through Crockett loam and clay at 40 inches, we match fluid and reaming to sticky ground, then track the head and check marked crossings before the pull.
- Crockett soil has clay beneath its loam surface, so we use a thinner fluid blend with polymer and open the hole in stages to limit sticky buildup.
- With heavy clay mapped at 40 inches in Point, we watch returns near US 69 pavement and keep fluid pressure low enough to avoid lifting the surface.
- Near City of Point water lines, we use hydrovac to expose marked utilities before drilling; Texas New Mexico Power is among the county electric reporters, but paint does not show depth.
- At Shuffle Creek, we plan the profile below the channel, track the head with a walkover locator, and log depth and pitch as rods advance.

What does a bore have to cross in Point near Shuffle Creek?
US 69 has 3.8 mapped roadway miles inside Point, while FM 514 has 1.2; Texas State Highway 276 is 1.3 miles outside the limits. TxDOT pavement crossings call for boring or tunneling, so a route beneath US 69 must pass below its travel lanes rather than cut through the surface. Within the street grid, 1st Street runs 2.24 miles, Locust Street 1.25 miles and Industrial Boulevard 0.88 miles, giving service routes several established corridors to evaluate.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 69 | US highway | 3.8 roadway miles inside | State highway office |
| FM 514 | State highway | 1.2 roadway miles inside | State highway office |
| Texas State Highway 276 | Highway nearby | 1.3 miles outside | State highway office |
| Shuffle Creek | Stream | 0.89 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rice Branch | Stream | 0.53 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rains Branch | Stream nearby | 0.3 miles outside | Checked for Corps of Engineers jurisdiction |
| Lake Fork Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Cedar Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Reeder Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
| Montgomery Lake | Lake or pond | 6 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped within Point or within 1 mile outside it, and no mapped street and rail crossings appear in the public records. Shuffle Creek runs 0.89 channel miles inside city limits and Rice Branch 0.53; no street crossings of named streams are mapped inside the limits. Rains Branch is 0.3 miles outside, and Montgomery Lake, a 6 acre lake, is outside the limits but within 1 mile. A creek route still needs a channel profile.
Whose permission does a Point bore need in Rains County?
In Point, city streets such as 1st Street belong to the incorporated city, while work in US 69 or FM 514 right of way goes through TxDOT. The TxDOT Paris District reviews the utility owner’s RULIS application; the owner files, and we prepare the bore plan and profile for its submission. Beneath existing US 69 or FM 514 pavement, TxDOT requires boring or tunneling. At highway crossings, required cover is 60 inches for electric, communication, water and pressurized sewer lines, subject to permit conditions. Planning a Shuffle Creek crossing includes checking for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground near the City of Point system?
The City of Point public water system uses surface water and reports 1,200 service connections serving 3,600 people, so a route near the water network needs careful utility exposure. Southwestern Electric Power, Texas New Mexico Power, Farmers Electric Cooperative and Wood County Electric Cooperative report electric service in Rains County. Those records do not identify the provider at every Point address, so we confirm the line owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Point | Public water system | Surface water | 1,200 connections, 3,600 people served |
| Southwestern Electric Power, Texas-New Mexico Power, Farmers Electric Cooperative and Wood County Electric Cooperative | Electric utilities reporting service in Rains County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Point’s median housing year at 1986; 19% of housing units were built before 1960, 62% from 1960 to 1999 and 19% in 2000 or later. That mix can mean a replacement route as well as a new service near Locust Street. We hydrovac marked utilities before drilling close to them, since surface marks show position rather than depth.

How far is Point from East Tawakoni and the Yukon yard?
Point is in Rains County at elevation 490 feet, covers 2.76 square miles and uses ZIP code 75472. East Tawakoni is 4.5 miles southwest, Lone Oak is 6.1 miles northwest and Emory, the county seat, is 7.0 miles southeast. Greenville, the nearest larger city, is 18.7 miles northwest. The Yukon, Oklahoma main office is 254 road miles away, a 5.1 hour drive, so distance is part of planning crew mobilization for a Point job.
Places near Point
- Directional boring in East Tawakoni: 4.5 miles southwest
- Directional boring in Lone Oak: 6.1 miles northwest
- Directional boring in Emory: 7 miles southeast
- Directional boring in West Tawakoni: 10.3 miles west
- Directional boring in Hawk Cove: 13.3 miles west
- Directional boring in Greenville: 18.7 miles northwest
What boring work comes up near 1st Street in Point?
- Highway crossing: A bore beneath US 69 has to pass under pavement, with the route planned around the highway travel lanes.
- Street service: A water or sewer service along 1st Street can run beneath pavement, with entry and exit pits placed in dirt.
- Water connection: A route near the City of Point water system needs marked lines exposed before the drill approaches.
- Creek crossing: A bore near Shuffle Creek needs a planned profile beneath the channel and a review of the creek crossing.
- Fiber conduit: A fiber route along Industrial Boulevard needs utility exposure and a path sized for the conduit.
- State road crossing: FM 514 has mapped roadway inside Point, so a right of way crossing calls for TxDOT coordination.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Point bore near US 69?
For a Point quote, start with the address or map pin, such as a route along 1st Street or a crossing near US 69. Tell us what goes in the ground, such as water or fiber, then the pipe or conduit size and the footage. A sketch or plans help us see the proposed route and its crossings.
The price follows the work at the site. Ground conditions matter: Crockett soil has clay at about 40 inches, which can affect fluid and reaming. Crossings add planning and exposure work, especially at US 69 pavement or Shuffle Creek. The pipe size, bore length, utilities to expose, concrete or pavement, pits and excavator time all affect the scope. Mobilization also reflects the 254 road miles from Yukon; high profile or emergency work can change the plan.
Questions people ask about boring in Point
Does Trinity take boring jobs in Point and Rains County, and who staffs them?
Yes. We take directional boring work across Rains County, including Point; our own crews and crews from satellite yards operated by drilling partners we have vetted can staff a job. You work with Trinity through planning and the bore log, whether the route follows 1st Street or crosses a service corridor.
Who is responsible for Industrial Boulevard in Point, and can a bore avoid cutting it?
Point is incorporated, so the city owns its streets, including Industrial Boulevard; a directional bore can pass beneath pavement without cutting it, with entry and exit pits set in dirt where site conditions allow. The actual route and any highway right of way are handled separately through TxDOT.
Does the housing age near Locust Street in Point tell us how old buried lines are?
No, housing age does not establish the age of buried lines. The American Community Survey 2019 to 2023 five year estimates give Point a median housing year of 1986, with 19% built before 1960. For replacement work near Locust Street, we expose marked utilities and plan the bore around what is found.
Does Crockett soil in Point corrode steel, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 100% of Point, so the line owner should consider casing and tracer wire materials. For Point’s loam, we consider HDPE because it does not share that soil corrosion concern. Near Crockett loam routes, the owner selects any coating for steel components.
What ground does a bore pass through in Point’s Crockett soil?
Crockett soil covers 95% of Point in the USDA soil survey, with loam at the surface. At about 40 inches, clay is mapped across 73% of the area and clay loam across 25%. That sticky material can build on the reamer and grip pipe, so staged reaming and fluid control matter.
How much rock is mapped within five feet of the surface in Point?
Weathered bedrock is mapped within 60 inches across 98% of Point, and typical bedrock depth is 47 inches. Hard bedrock is not mapped within that interval, but that does not rule out deeper rock. A bore may encounter weathered material that slows drilling or affects steering.
Does Point’s distance from Yukon change a job if Greenville is nearby?
Point is 254 road miles from Trinity’s Yukon, Oklahoma main office, a 5.1 hour drive; Greenville is 18.7 miles northwest of Point. The longer mobilization from Yukon can affect logistics, so the route, access and equipment needs help shape the crew plan.
How early should I request Texas811 marks for a bore near 1st Street in Point?
Texas law requires a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a 1st Street start moves more than 14 days beyond the original notice, submit a new request. Before work continues near Shuffle Creek, we have worn or moved marks refreshed through Texas811.
What affects the price of a directional bore near US 69 in Point?
The price reflects the actual scope, not just the footage. Near US 69, pavement and right of way conditions matter; Crockett clay, pipe size, bore length and utilities to expose also affect the plan. Shuffle Creek crossings, pits, excavator time, concrete and mobilization from Yukon can add work.
Where the Point facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Point
- U.S. Census Bureau, TIGER/Line 2024: Point boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Point
- U.S. Census Bureau, American Community Survey 2019 to 2023: Point housing units and year built
- Macrostrat geologic map compilation: map units under Point
- U.S. EPA Safe Drinking Water Information System: public water systems serving Point
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Rains County
- U.S. Geological Survey, Elevation Point Query Service: Point elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Point
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Point
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Point, Texas
Type the address of your job in Point. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Point
All counties: Texas county list.
