trinityboringsolutions.com

Yantis Texas Directional Boring: Freestone Soil, FM 17 and Little Caney Creek

Quick Answer: Yantis is an incorporated town, so its city streets belong to the city; Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for routes near Little Caney Creek. Our Yukon, Oklahoma main office is 275 road miles from Yantis, where FM 17 is one route a project may cross. Freestone soil is common here, and clay mapped below the surface can make a reamer sticky. Staged reaming and timely pipe pull help manage that ground near Main Street.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Yantis bores at a glance

  • Incorporated city in Wood County, Texas. Population 440 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 275 miles, about 5.6 hours of driving.
  • Ground: Freestone soil is mapped on 55 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 6 percent of the area.
  • Highways inside the boundary: FM 17, Texas State Highway 154 and FM 2966. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Little Caney Creek.
  • Public water: City of Yantis, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring near Little Caney Creek in Yantis?

Trinity Boring Solutions takes directional boring work in Yantis, Wood County, where the Census Bureau Vintage 2024 estimate puts the population at 440. Yantis is an incorporated town, and its streets belong to the city. We install water, sewer, gas, electric conduit and fiber on routes beneath or alongside Main Street, FM 17 and other local streets, subject to the project alignment.

Our main office is in Yukon, Oklahoma, and Yantis work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, with directional boring work dating to 1982. For a route near Walnut Street, our equipment range covers 3/4 inch service lines to 48 inch casing and bore lengths from 10 feet to 5,000 feet.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of Freestone soil will a bore encounter in Yantis?

Freestone fine sandy loam is the leading mapped soil in Yantis, covering 55 percent of the town, and Woodtell soil accounts for another 33 percent. The USDA soil survey maps surface textures as 59 percent fine sandy loam, 33 percent loam and 7 percent silt loam. At about 40 inches below the surface, clay is mapped across 61 percent of the area and clay loam across 34 percent. These are mapped patterns, not test borings; the clay can cling to a reamer and grip pipe.

USDA soil survey, inside the Yantis city limitsWhat is mapped
Soil series mappedFreestone 55 percent, Woodtell 33 percent, Derly 7 percent and Bernaldo 4 percent
Texture at the surfacefine sandy loam 59 percent, loam 33 percent and silt loam 7 percent
Texture about 40 inches downclay 61 percent, clay loam 34 percent and sandy clay loam 5 percent
Engineering class about 40 inches downfat clay (CH) 88 percent, lean clay (CL) 7 percent and clayey sand (SC) 5 percent
Average clay content about 40 inches down48 percent
Bedrock mapped within 60 inches6 percent of the area (0 percent hard rock, 6 percent weathered rock)
Seasonal water table within 60 inches67 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel95 percent of the area

The USDA map places bedrock within 60 inches in 6 percent of Yantis, with a typical depth of 57 inches, so most near surface routes are mapped as soil rather than bedrock. A seasonal water table is mapped within 60 inches across 67 percent, which can mean water in pits. Because flood prone soils are not mapped in Yantis, we account for Freestone and Woodtell soil series when planning boring depth. In Yantis, high steel corrosion risk is mapped across 95 percent, so we consider casing and tracer wire materials for Main Street crossings. The Wilcox Group, undivided, of Paleogene age is mapped here and includes mudstone and sand, so deeper route conditions still need review.

How do we drill through Yantis clay?

We use a controlled drilling and reaming sequence in Yantis because clay is mapped across 61 percent of the ground at about 40 inches, where it can ball up on the reamer.

  1. In Yantis’s heavy clay, we use thinner drilling fluid with polymer and ream in stages to limit sticky cuttings and reduce the chance of the clay gripping pipe.
  2. Where FM 17 pavement is near the bore, we watch fluid returns and keep pressure controlled so drilling fluid does not lift the surface.
  3. With a seasonal water table mapped within 60 inches across 67 percent of Yantis, we keep pits small and pump out water when needed.
  4. Before drilling near a marked line by the City of Yantis water system or an electric route, we pothole to verify depth, then track and log the drill head.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Where might a Yantis line go under Little Caney Creek?

FM 17 and Texas State Highway 154 each have 1.8 mapped roadway miles inside Yantis, while FM 2966 has 0.4 miles. Those roads can bring a bore close to pavement and driveways, where the route and depth need careful planning. Main Street runs 1.78 miles in town, Oak Street 1.06 miles and Walnut Street 0.79 miles. A bore can pass beneath pavement without cutting it, with entry and exit pits placed in dirt where the site allows.

CrossingTypeMapped extentWho has a say
FM 17State highway1.8 roadway miles insideState highway office
Texas State Highway 154State highway1.8 roadway miles insideState highway office
FM 2966State highway0.4 roadway miles insideState highway office
Little Caney CreekStream1.4 channel miles insideChecked for Corps of Engineers jurisdiction
Double BranchStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Lake Fork ReservoirLake or pond21,770 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Yantis or within one mile of its limits, and no street and rail crossing is mapped in town. Little Caney Creek runs 1.4 channel miles through Yantis, with one mapped street crossing of a named stream. A planned creek crossing is checked for U.S. Army Corps of Engineers jurisdiction. Lake Fork Reservoir, a 21,770 acre lake, lies within one mile but outside town limits, so a nearby route still needs site specific review.

Who has to sign off on a Yantis bore under FM 17?

A Yantis bore under FM 17 goes to TxDOT’s Tyler District, with 60 inches of cover at crossings as the baseline for water, electric and communication lines; the utility owner files the application in RULIS. Pressurized sewer crossings also need 60 inches of cover, while the rules set different cover depths for lines running along the right of way. TxDOT requires boring or tunneling beneath existing highway pavement, and the permit can set a different depth. Yantis streets belong to the city; a Little Caney Creek route is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Yantis and Wood County?

The City of Yantis public water system uses groundwater wells and reports 312 service connections serving 488 people. Near those water lines, we use hydrovac potholing to expose marked utilities before drilling close to them. Electric service reporting for Wood County lists Oncor Electric Delivery Company, Southwestern Electric Power, Farmers Electric Cooperative, Upshur Rural Electric Cooperative and Wood County Electric Cooperative. The electric line owner for a Yantis address is confirmed before planning a conduit bore.

Line ownerWhat it isSourceSize
City of YantisPublic water systemGroundwater wells312 connections, 488 people served
Oncor Electric Delivery Company, Southwestern Electric Power, Farmers Electric Cooperative, Upshur Rural Electric Cooperative and Wood County Electric CooperativeElectric utilities reporting service in Wood CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Yantis’s median housing year at 1977: 29 percent of homes were built before 1960, 45 percent from 1960 to 1999 and 26 percent in 2000 or later. That mix can mean replacement work near older Main Street services as well as new connections. Before the drill approaches a marked line, we pothole it to check its depth; paint alone does not show depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Do you cover Yantis and nearby Alba?

Yantis is in Wood County at an elevation of 478 feet, and its incorporated area covers 1.84 square miles. ZIP code 75497 serves the town. Alba is 10.3 miles south, Como is 10.8 miles northeast and Emory is 11.5 miles west. Quitman, the Wood County seat, is 12.0 miles southeast; Sulphur Springs is 15.0 miles north and is the nearest larger city listed. From our Yukon, Oklahoma main office, the road distance is 275 miles and the drive is 5.6 hours, which can affect mobilization for a Yantis project.

Places near Yantis

What boring work comes up near Walnut Street in Yantis?

  • Highway crossing: A route beneath FM 17 or Texas State Highway 154 needs a bore plan that accounts for highway pavement and the utility owner’s permit.
  • Water service: A connection near the City of Yantis groundwater system can be routed past existing service lines after marked utilities are exposed.
  • Fiber conduit: A run along Main Street can pass below pavement, with the route checked for existing lines and available pit locations.
  • Creek crossing: A line beneath Little Caney Creek needs a planned profile and a jurisdiction check before the crossing is set.
  • Street service: A route near Walnut Street can use entry and exit pits in dirt to avoid cutting the paved street.
  • Reservoir area: A project near Lake Fork Reservoir needs its route reviewed against the actual site, since the lake is outside Yantis limits.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send to quote a Yantis bore near Main Street?

For a Yantis quote, start with the address or map pin, such as a location along Main Street, then tell us what is going underground. Include the pipe or conduit size and estimated footage; a sketch or plans can show how the route meets FM 17 or a driveway. Those details help us define the crossing and access needs before planning the bore.

A straightforward route through Freestone soil with clear access is simpler to plan than one that needs extra crossings or pits. Price depends on bore length, pipe or conduit size, soil and rock, utilities to expose, pavement, creek crossings, pit work, sand backfill and excavator time. Little Caney Creek can add crossing planning, and FM 17 can bring TxDOT requirements into the route. The 275 road miles from Yukon shape how we schedule mobilization for boring work in Yantis.

Questions people ask about boring in Yantis

Does Trinity take directional boring work in Yantis, Wood County, and how is it staffed?

Yes, Trinity Boring Solutions takes directional boring work in Yantis, Wood County. We assign our own crews or work from satellite yards operated by partner drilling contractors we have vetted. The customer works with Trinity from the first call through the bore log, including on a route near FM 17.

Who approves a Yantis bore beneath FM 17, and which state office reviews it?

The utility owner submits the highway utility permit application through TxDOT’s RULIS system, and the TxDOT Tyler District reviews the FM 17 route. Trinity prepares the bore plan and profile and works under the permit issued to the line owner. The required cover and route details are addressed in that review.

Can a contractor bore a line under Little Caney Creek in Yantis?

A line can be planned beneath Little Caney Creek, which has 1.4 channel miles in Yantis. The crossing needs a route and bore profile, and planning checks whether the U.S. Army Corps of Engineers has jurisdiction. Site conditions and existing marked utilities also shape the crossing plan.

Who runs Yantis’s public water system in Wood County, and where does its water come from?

The City of Yantis owns and operates the public water system, which gets water from groundwater wells. Yantis’s 312 service connections serve 488 people, a scale we consider when planning underground work near Oak Street. For a bore near those Yantis water lines, the marked utilities need to be exposed before drilling approaches them.

Which electric companies report service in Yantis and Wood County, and who confirms conduit specs?

Wood County electric service reporting lists Oncor Electric Delivery Company, Southwestern Electric Power, Farmers Electric Cooperative, Upshur Rural Electric Cooperative and Wood County Electric Cooperative. The line owner at the specific Yantis address must be identified before conduit planning, and that owner confirms the applicable conduit specifications.

Who is responsible for Walnut Street in Yantis, and does a bore require cutting it?

Walnut Street is a city street because Yantis is incorporated. A directional bore can pass beneath the street without an open cut when the route and pit locations allow; the plan still needs to account for marked utilities and pavement near the crossing.

Can I reach Trinity after hours about an urgent bore near Walnut Street in Yantis?

Yes. A person answers Trinity’s phone at (405) 409-7423 around the clock for urgent work, including a call about a route near Walnut Street. The project still needs its location, scope and utility information assessed before the bore plan is set.

How much notice does Texas811 need for a Main Street bore in Yantis, and what if marks move?

For a Main Street bore, submit the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; Texas811 describes this as two working days. Request it no earlier than 14 days before the start. If the start slips more than 14 days past the original notice, make a new request, and have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of a directional bore near FM 17 in Yantis?

The Yantis job scope drives the price: length, pipe or conduit size, Freestone soil and clay conditions, utilities to expose, pavement and any creek crossing all matter. A route under FM 17 may need highway permit planning, while access, pits and excavator time affect the work. Mobilization from the Yukon office also reflects the distance to Yantis.

Where the Yantis facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Yantis

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Yantis, Texas

Type the address of your job in Yantis. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Yantis

Same county: Mineola · Winnsboro · Holly Lake Ranch · Hawkins. All counties: Texas county list.