Round Rock Texas Directional Boring: Austin Soil, Union Pacific Track and Brushy Creek
Quick Answer: The City of Round Rock owns the public water system, and Oncor Electric Delivery Company reports electric service in Williamson County, so we verify line ownership before a conduit bore. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Round Rock, including routes beneath Interstate 35. Our Yukon, Oklahoma main office is 384 road miles away, and Louis Henna Boulevard is one local route to plan around for mobilization. Austin soil and clay are common in the mapped ground, so sticky cuttings call for staged reaming and careful fluid control. Union Pacific track and Brushy Creek can also shape the crossing plan.
Round Rock bores at a glance
- Incorporated city in Williamson County and Travis County, Texas. Population 135,359 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 384 miles, about 7.4 hours of driving.
- Ground: Austin soil is mapped on 20 percent of the area, with bedrock about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 66 percent of the area.
- Highways inside the boundary: Interstate 35, US 79, Texas State Highway 45, FM 1460 and RM 620. State permit office: TxDOT Austin District.
- Railroad track inside the boundary: Union Pacific and Georgetown Railroad, with 22 mapped street and rail crossings.
- Named streams inside the boundary: Brushy Creek, Chandler Branch, Lake Creek and Onion Branch.
- Public water: City of Round Rock, surface water.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for Round Rock directional boring near Union Pacific track?
Trinity Boring Solutions takes directional boring work in Round Rock, where the City of Round Rock owns the public water system and Oncor Electric Delivery Company reports electric service in Williamson County; we verify the line owner before a conduit bore near Interstate 35. We use the Census Bureau Vintage 2024 estimate of 135,359 as context when planning underground work in Round Rock. Our crews place water, sewer, gas, electric conduit and fiber beneath routes such as Louis Henna Boulevard when the alignment and line owner call for it.
Our main office is in Yukon, Oklahoma, and Round Rock work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet under Tulsa’s Arkansas River with 48 inch pipe. We started as a family business in 1965 and have drilled directionally since 1982. A service line beneath Louis Henna Boulevard is a more typical Round Rock job.

What ground does Austin soil mean for a Round Rock bore?
Austin soil covers 20 percent of Round Rock in the USDA soil survey, with Eckrant at 16 percent and Houston Black at 13 percent. At about 40 inches below the surface, the survey maps bedrock across 63 percent of the area and clay across 24 percent; average clay content there is 49 percent. Because sandy ground is not mapped at that depth in Round Rock, we confirm subsurface conditions before setting a boring path. These are mapped patterns, not test borings, so a route near Old Settlers Boulevard still needs site specific planning. Clay can cling to the reamer and grip pipe, which favors staged reaming and pulling the pipe the same day the hole is opened.
| USDA soil survey, inside the Round Rock city limits | What is mapped |
|---|---|
| Soil series mapped | Austin 20 percent, Eckrant 16 percent, Houston Black 13 percent, Georgetown 7 percent and Castephen 6 percent |
| Texture at the surface | silty clay 37 percent, clay 25 percent and stony clay 10 percent |
| Texture about 40 inches down | bedrock 63 percent, clay 24 percent and silty clay 6 percent |
| Engineering class about 40 inches down | fat clay (CH) 29 percent and lean clay (CL) 5 percent |
| Average clay content about 40 inches down | 49 percent |
| Bedrock mapped within 60 inches | 66 percent of the area (28 percent hard rock, 37 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 83 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 66 percent of Round Rock, including hard bedrock across 28 percent and weathered bedrock across 37 percent; typical depth is 23 inches. Crews should allow for slower drilling and possible steering changes at soil to rock transitions. Seasonal water table is not mapped in the top 60 inches, while flood prone soils cover 4 percent, so Brushy Creek still needs a route planned below its channel. High steel corrosion risk covers 83 percent. The map also shows Quaternary terrace deposits of sand, silt, clay and gravel, with Late Cretaceous sedimentary units nearby in the mapped geology.
How do crews handle Round Rock bedrock and clay?
For a Round Rock route through Austin soil or shallow mapped bedrock, we match the tooling and drilling pace to what the alignment shows. Brushy Creek and the ground beside it also call for attention to depth and fluid returns.
- Austin and Houston Black clay can stick to the reamer, so we use a thinner fluid mix with polymer, open the hole in stages and have pipe ready for the pull.
- With bedrock mapped within 60 inches across much of Round Rock, we slow down when the bore reaches rock and watch the drill head at soil to rock contacts.
- Near Brushy Creek, we plan depth below the channel and manage fluid returns so pressure does not lift pavement or disturb the creek bank.
- Along Louis Henna Boulevard, we pothole each marked utility before drilling close, then track the head from the surface and record depth and pitch.

Which Round Rock roads, tracks or creeks can a bore cross near Interstate 35?
Interstate 35, US 79 and Texas State Highway 45 all run through Round Rock, and Texas State Highway 130 is 0.1 miles from the city limits. A bore beneath existing highway pavement avoids cutting across the travel surface, but the alignment and permit determine the design. Louis Henna Boulevard is the city’s longest named street at 8.29 miles, followed by Palm Valley Boulevard at 6.9 miles and A W Grimes Boulevard at 6.57 miles. Those long routes can mean several pavement, driveway or utility conflicts to check before setting pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 35 | Interstate | 15.6 roadway miles inside | State highway office |
| US 79 | US highway | 8.3 roadway miles inside | State highway office |
| Texas State Highway 45 | State highway | 15.8 roadway miles inside | State highway office |
| FM 1460 | State highway | 2.5 roadway miles inside | State highway office |
| RM 620 | State highway | 2.3 roadway miles inside | State highway office |
| RM 1431 | State highway | 3.4 roadway miles inside | State highway office |
| FM 1325 | State highway | 0.1 roadway miles inside | State highway office |
| Loop 1 | Highway nearby | Runs along or touches the city limits | State highway office |
| Texas State Highway 130 | Highway nearby | 0.1 miles outside | State highway office |
| Union Pacific | Railroad | 8.96 track miles inside | The railroad |
| Georgetown Railroad | Railroad | 6.17 track miles inside | The railroad |
| Brushy Creek | Stream | 7.33 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Chandler Branch | Stream | 6.35 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Lake Creek | Stream | 5.43 channel miles inside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 8.96 track miles inside Round Rock, and Georgetown Railroad has 6.17; public records map 22 street and rail crossings in the city. A track crossing needs an agreement with its owner before the route is set. Brushy Creek runs 7.33 channel miles, while Chandler Branch runs 6.35 and Lake Creek 5.43; 81 street crossings of named streams are mapped. Meadow Lake is also inside the city, so water crossings need early route review.
Who approves a Round Rock bore in Williamson County?
For work beneath Interstate 35, US 79 or Texas State Highway 45, the line owner applies for the TxDOT utility permit through RULIS, and the TxDOT Austin District reviews it. We prepare the bore plan and profile for the utility owner’s application and work under its permit. TxDOT rules call for boring or tunneling beneath existing highway pavement; electric and communication lines crossing need 60 inches of cover below the lowest crossed grade, while water crossings need 60 inches and pressurized sewer crossings need 60 inches. Round Rock city streets such as Louis Henna Boulevard belong to the city. A Union Pacific or Georgetown Railroad crossing needs an agreement with the track owner. Brushy Creek and other water crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the Round Rock lines near the City of Round Rock water system?
The City of Round Rock owns the public water system, which draws from surface water and reports 37,492 service connections serving 130,662 people. For an electric conduit near Interstate 35, we first confirm the line owner because county service reports include Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative. Those reports do not identify the provider for every address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Round Rock | Public water system | Surface water | 37,492 connections, 130,662 people served |
| Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric Cooperative | Electric utilities reporting service in Williamson County and Travis County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Round Rock’s median housing year at 2001; 2 percent of homes were built before 1960, 44 percent from 1960 to 1999 and 54 percent in 2000 or later. That mix can mean both replacement work and new service routes along Louis Henna Boulevard. Before drilling near marked lines, we hydrovac pothole each utility on the planned path. Paint shows its position, not its depth, and an older or newer street corridor can both hold buried conflicts.

How far is Round Rock from Wells Branch and our Yukon office?
Round Rock is mainly in Williamson County, with 2 percent of the city in Travis County, and covers 38.14 square miles at an elevation of 731 feet. We use Round Rock ZIP codes 78665, 78664 and 78681 to check the service area before planning an underground crossing. Wells Branch is 5.8 miles south, Brushy Creek is 4.6 miles west, Pflugerville is 6.5 miles southeast and Hutto is 7.2 miles east. Georgetown, the Williamson County seat, is 10.0 miles north; Austin is 16.6 miles south. The Yukon yard is 384 road miles away, a 7.4 hour drive, which can affect equipment mobilization for a Louis Henna Boulevard project.
Places near Round Rock
- Directional boring in Brushy Creek: 4.6 miles west
- Directional boring in Wells Branch: 5.8 miles south
- Directional boring in Pflugerville: 6.5 miles southeast
- Directional boring in Hutto: 7.2 miles east
- Directional boring in Cedar Park: 9.3 miles west
- Directional boring in Austin: 16.6 miles south
What boring work comes up around Round Rock and Brushy Creek?
- Highway crossing: A bore beneath Interstate 35 keeps the travel surface intact, with the line owner arranging the TxDOT permit.
- Water service: A route from the City of Round Rock system can pass beneath Palm Valley Boulevard without opening the paved street.
- Fiber conduit: Louis Henna Boulevard gives a long urban corridor where staged pits and utility potholing can guide the alignment.
- Creek crossing: Brushy Creek needs a planned depth below its channel and a check for federal jurisdiction during planning.
- Rail crossing: A route under Union Pacific track needs the railroad owner’s crossing agreement before casing and depth are set.
- Drainage crossing: Chandler Branch or Lake Creek can affect the path, fluid plan and location of the bore pits.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for work near Round Rock’s Louis Henna Boulevard?
For a Round Rock quote, start with an address or map pin, such as a point along Louis Henna Boulevard. Tell us what will go underground, whether it is water, sewer, gas, electric conduit or fiber, then give the pipe or conduit size and expected footage. A sketch or plans help us see nearby Interstate 35, track or creek crossings before we scope the work.
The job route and scope set the price. Ground conditions matter: Austin soil can load the reamer, while shallow mapped bedrock can slow the bore. Crossings add work when the path meets Interstate 35, Union Pacific track or Brushy Creek. We also account for pipe or conduit size, total length, marked utilities to expose, pavement or concrete, creek and drainage conditions, pits, excavator time and sand backfill. The 384 road miles from Yukon can affect mobilization, as can high profile or emergency work.
Questions people ask about boring in Round Rock
Does Trinity take directional boring work in Williamson County near Round Rock, and who staffs it?
Yes, Trinity Boring Solutions takes Round Rock work in Williamson County. We handle projects with our own crews and with crews from partner drilling contractors we have vetted. You coordinate with Trinity from the first call through the bore log, regardless of which crew is on site. The route near Interstate 35 helps define the work plan.
What ground should I expect for a Round Rock bore through Austin soil?
Austin soil is mapped across 20 percent of Round Rock, and the USDA soil survey maps clay across 24 percent of the area at about 40 inches. Average clay content at that depth is 49 percent. Sticky cuttings can build on a reamer, so a bore near Old Settlers Boulevard may need staged reaming and close fluid control.
How much bedrock is mapped in the top five feet of Round Rock?
The USDA soil survey maps bedrock within 60 inches across 66 percent of Round Rock. It maps hard bedrock across 28 percent and weathered bedrock across 37 percent of the area. Typical depth is 23 inches, so a route near Brushy Creek may encounter rock early, though mapped patterns are not a substitute for site investigation.
Who approves a Round Rock bore under Interstate 35, and which TxDOT office reviews it?
The line owner applies for the utility permit through TxDOT’s RULIS system, and the TxDOT Austin District reviews a crossing beneath Interstate 35. We prepare the bore plan and profile for the owner’s application. Existing highway pavement is bored or tunneled beneath, and the permit sets the project conditions.
What does a Round Rock bore beneath Union Pacific track require?
A crossing beneath Union Pacific track requires an agreement with the railroad before the route is finalized. The agreement sets crossing conditions such as casing, depth and flagging. Round Rock has 8.96 track miles owned by Union Pacific, so confirm the track owner early when planning a Louis Henna Boulevard alignment.
Can you bore a utility beneath Brushy Creek in Round Rock?
Yes, a utility can be planned beneath Brushy Creek, but the bore needs a route and depth that stay below the channel. For a Round Rock crossing, we check US Army Corps of Engineers jurisdiction during planning before setting the boring approach. Brushy Creek has 7.33 channel miles inside Round Rock, so the crossing location matters to the plan.
How much Texas811 notice is needed for a Round Rock bore near Louis Henna Boulevard?
Paint marks near Louis Henna Boulevard show utility position, not depth. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, request a new ticket; have worn or moved marks refreshed through Texas811 before work continues.
How far is Round Rock from Yukon, and does Austin soil change mobilization?
From our Yukon, Oklahoma main office, Round Rock is 384 road miles and a 7.4 hour drive, which we factor into scheduling. That distance can affect mobilization, while Austin soil and shallow mapped bedrock influence tooling and drilling time. A route near Palm Valley Boulevard, for example, needs its own scope rather than a plan based only on distance.
What affects the cost of a directional bore in Round Rock near Interstate 35?
The route and scope determine the price, with no single factor deciding it. Pipe size and length, Austin soil or bedrock, utilities to expose, pavement, pits, excavator time and backfill all matter. Crossings at Interstate 35, Union Pacific track or Brushy Creek add planning and field conditions; mobilization from Yukon is another factor.
Where the Round Rock facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Round Rock
- U.S. Census Bureau, TIGER/Line 2024: Round Rock boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Round Rock
- U.S. Census Bureau, American Community Survey 2019 to 2023: Round Rock housing units and year built
- Macrostrat geologic map compilation: map units under Round Rock
- U.S. EPA Safe Drinking Water Information System: public water systems serving Round Rock
- U.S. Department of Transportation, North American Rail Network: track owners in Williamson County and Travis County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Williamson County and Travis County
- U.S. Geological Survey, Elevation Point Query Service: Round Rock elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Round Rock
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Round Rock
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Round Rock, Texas
Type the address of your job in Round Rock. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Round Rock
County: Travis County directional boring. Same county: Manor · Lakeway · Leander · Lago Vista · Bee Cave · Hornsby Bend · Shady Hollow · West Lake Hills · Barton Creek · Hudson Bend · Jonestown · Briarcliff. All counties: Texas county list.
