trinityboringsolutions.com

Bartlett Texas Directional Boring: Branyon Clay, FM 487 and Union Pacific

Quick Answer: The City of Bartlett owns the public water system and its municipal electric system, so we identify both before planning a bore near Jackson Street. We take directional boring, also called horizontal directional drilling (HDD), work in Texas, including crossings of FM 487 or the Union Pacific track in Bartlett. The city is 357 road miles from our Yukon, Oklahoma main office, which matters when planning work near Evie Street. Branyon clay covers much of Bartlett, so sticky cuttings and pressure under pavement need close control.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Bartlett bores at a glance

  • Incorporated city in Williamson County and Bell County, Texas. Population 1,676 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 357 miles, about 6.9 hours of driving.
  • Ground: Branyon soil is mapped on 83 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 3 percent of the area.
  • Highways inside the boundary: FM 487 and Texas State Highway 95. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: Union Pacific, with 4 mapped street and rail crossings.
  • Named streams inside the boundary: Town Branch.
  • Public water: City of Bartlett, groundwater wells.
  • Electric: City of Bartlett municipal electric system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Town Branch in Bartlett?

Trinity Boring Solutions takes directional boring work in Bartlett, where the City of Bartlett owns the water system and municipal electric system. The Census Bureau Vintage 2024 estimate puts the population at 1,676 across Williamson County and Bell County. Along streets such as Jackson Street or Evie Street, we install water, sewer, gas, electric conduit and fiber lines by planning the route around marked utilities.

Our main office is in Yukon, Oklahoma, and Bartlett work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. From a 3/4 inch service line to a 48 inch casing, we can size work for a service route near Town Branch or a larger crossing. For underground planning in Bartlett, our family business began in 1965, and we have done directional boring since 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Branyon soil in Bartlett?

The USDA soil survey maps Branyon soil across 83 percent of Bartlett, with Branyon clay map units covering 75 percent at 0 to 1 percent slopes and 8 percent at 1 to 3 percent slopes. Clay is mapped across the surface and at about 40 inches, where the soil is classified CH and averages 53 percent clay. For Bartlett planning, we provide mapped patterns, not test borings, to guide underground work. That heavy clay can hold an open bore, but it sticks to tooling and can grip pipe as it swells.

USDA soil survey, inside the Bartlett city limitsWhat is mapped
Soil series mappedBranyon 83 percent, Houston Black 10 percent, Heiden 4 percent and Ferris 3 percent
Texture at the surfaceclay 100 percent
Texture about 40 inches downclay 100 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down53 percent
Bedrock mapped within 60 inches3 percent of the area (0 percent hard rock, 3 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel100 percent of the area

The mapped soil data places typical bedrock depth at 45 inches, with bedrock mapped within 60 inches in 3 percent of Bartlett. No seasonal water table or flood prone soils are mapped. High steel corrosion risk covers 100 percent of the mapped area, so the line owner should consider casing and tracer wire materials; HDPE avoids that steel concern. Geologic mapping lists High gravel deposits of Pleistocene age and Late Cretaceous sedimentary material described as sand, chalk and mud, which can mean changing ground along a bore.

How do we drill through Bartlett clay?

Bartlett’s heavy clay calls for steady fluid control, staged reaming and a pipe pull planned for the same day the hole is opened. We track the drill head from the surface along streets such as Clark Street.

  1. Branyon clay can ball up on the reamer, so we use thinner drilling fluid with polymer and open the bore in stages near Jackson Street.
  2. Because Bartlett maps heavy clay across its area, we watch fluid returns near pavement to limit pressure that could lift a road surface.
  3. With Branyon clay able to swell around pipe, we plan the pull so pipe is ready when the final ream opens the route near FM 487.
  4. At Town Branch or a marked utility crossing, we track the drill head from the surface and log depth and pitch as the bore advances.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

What is in the way of a new line in Bartlett near Union Pacific?

FM 487 runs 1.9 mapped roadway miles inside Bartlett, and Texas State Highway 95 runs 1.6 miles, so a route crossing either highway needs a planned bore beneath the pavement. Jackson Street is the longest named street at 1.77 miles in the city, followed by Clark Street at 1.66 miles and Evie Street at 1.63 miles. We can route a line beneath these paved corridors rather than cut across them, with access pits placed off the roadway where the site allows.

CrossingTypeMapped extentWho has a say
FM 487State highway1.9 roadway miles insideState highway office
Texas State Highway 95State highway1.6 roadway miles insideState highway office
Union PacificRailroad1.28 track miles insideThe railroad
Town BranchStream0.22 channel miles insideChecked for Corps of Engineers jurisdiction
Donahoe CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Cottonwood BranchStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Indian CreekStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
North Fork Indian CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific owns 1.28 track miles in Bartlett on its Waco Subdivision, and public mapping shows 4 street and rail crossings in the city. A rail bore needs the track owner’s crossing agreement, which sets conditions for that crossing. Town Branch runs 0.22 channel miles inside the city, with 1 mapped street crossing of a named stream. No lake or pond is mapped within one mile, but a Town Branch crossing still needs jurisdiction checked during planning.

Who approves a Bartlett bore under FM 487?

For work in FM 487 or Texas State Highway 95 right of way, the line owner files the utility permit in TxDOT’s online RULIS system, and the TxDOT Austin District reviews it. We prepare the bore plan and profile for the owner’s application and work under the permit issued to that owner. TxDOT cover requirements include 60 inches at highway crossings for electric and communication lines and 60 inches for water lines. A Union Pacific crossing needs an agreement from the railroad, and Town Branch is checked for U.S. Army Corps of Engineers jurisdiction during planning. Bartlett city streets belong to the city itself.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns lines near the City of Bartlett water system?

The City of Bartlett public water system uses groundwater wells and reports 800 service connections serving 2,950 people. The city also owns its municipal electric system, with 636 customers reported to EIA. Before a conduit bore near Jackson Street, we confirm the electric line owner and expose marked utilities by hydrovac potholing. That matters because paint shows where a line is, not how deep it sits.

Line ownerWhat it isSourceSize
City of BartlettPublic water systemGroundwater wells800 connections, 2,950 people served
City of Bartlett municipal electric systemCity owned electric systemReports to the U.S. Energy Information Administration636 customers reported
Oncor Electric Delivery Company, Austin Energy, City of Georgetown, Bartlett Electric Cooperative, Bluebonnet Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Williamson County and Bell CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 estimates put Bartlett’s median housing year at 1957; 57 percent of homes were built before 1960, 32 percent from 1960 to 1999 and 11 percent in 2000 or later. That mix can mean replacement work as well as new service routes along streets such as Clark Street. We pothole marked water and electric lines before the drill approaches them.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Bartlett from Sonterra and our Yukon office?

Bartlett covers 1.24 square miles in Williamson County and Bell County, at an elevation of 601 feet, and its ZIP code is 76511. Granger is 5.3 miles south, while Holland is 6.7 miles north. Sonterra, the nearest larger city, is 9.8 miles west, and Georgetown, the Williamson County seat, is 18.1 miles southwest. Bartlett is 357 road miles and a 6.9 hour drive from our Yukon, Oklahoma main office, a distance that factors into mobilization for work near FM 487.

Places near Bartlett

What boring work comes up near Evie Street in Bartlett?

  • Highway crossing: A bore beneath FM 487 can carry a water line or conduit without cutting the highway pavement.
  • Street service: A route along Evie Street can connect a service line while keeping the paved street surface intact.
  • Rail crossing: A line beneath the Union Pacific track needs the railroad’s crossing agreement and a planned casing arrangement.
  • Creek crossing: A bore near Town Branch can leave the channel bank uncut, with jurisdiction checked during planning.
  • Water service: A connection near the City of Bartlett groundwater system needs the existing water line exposed before drilling close by.
  • Fiber route: A conduit along Jackson Street can pass below pavement, with marked utilities pothole exposed before the drill approaches.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for boring near Jackson Street in Bartlett?

For a quote near Jackson Street or FM 487, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help us assess the route. We use those details to plan access and identify the crossings that can change the work.

The job scope sets the price through ground, crossings and logistics. Branyon clay can affect fluid handling and reaming, while pavement on FM 487 or a Union Pacific track crossing adds planning and crossing work. Length, pipe size, exposed utilities, creek or drainage crossings, pits and equipment time also matter. Bartlett’s 357 road miles from Yukon can affect mobilization, and emergency timing or a high profile route changes the work plan.

Questions people ask about boring in Bartlett

Does Trinity take directional boring work in Bartlett and Williamson County?

Yes. We take directional boring work in Bartlett and Williamson County, with our own crews and partner contractor crews from satellite yards. Trinity stays responsible from the first call through the bore log, whichever crew is on site. For a route near FM 487, we plan around the local ground and any marked utilities.

Does Branyon soil in Bartlett corrode steel, and what pipe can I use?

The USDA soil survey maps high steel corrosion risk across 100 percent of Bartlett, including areas mapped as Branyon clay. The line owner should weigh casing and tracer wire materials for a route near Jackson Street. HDPE is not affected by that soil corrosion concern, while the owner selects any coatings for steel.

What ground will a Bartlett bore pass through in Branyon soil?

Branyon soil covers 83 percent of mapped area in Bartlett, and the USDA soil survey maps clay at about 40 inches with a CH classification. The mapped clay averages 53 percent clay at that depth. It can keep an open hole standing, but sticky cuttings can build on the reamer, so we stage the reaming on a route near Evie Street.

Will a bore in Bartlett hit rock near Town Branch?

The soil survey maps bedrock within 60 inches in 3 percent of Bartlett, with typical depth listed at 45 inches, so a shallow rock layer is possible at some locations. Geologic mapping also lists High gravel deposits and Late Cretaceous sedimentary material. A Town Branch route still needs site specific planning rather than an assumption about what lies below.

Who approves a Bartlett bore under FM 487, and which TxDOT office reviews it?

The line owner applies for a utility permit for work in FM 487 right of way through TxDOT’s RULIS system, and the TxDOT Austin District reviews it. We prepare the bore plan and profile for the owner. The permit sets the allowed work and cover requirements for the highway crossing.

What does a Bartlett bore under the Union Pacific track need?

A bore under the Union Pacific track in Bartlett needs an agreement from the railroad that owns it. The agreement sets crossing conditions, including casing, depth and flagging. Public mapping shows 1.28 track miles in the city, so the route and its relation to the Waco Subdivision need to be established during planning.

What bore sizes and lengths can you handle near Front Street in Bartlett?

For underground work in Bartlett, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A job near Front Street depends on the route, access and what is being installed. A sketch or plans help us assess whether the requested size and length fit the crossing.

How much notice does Texas811 need for a bore near Jackson Street in Bartlett?

For a Jackson Street start, place the Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays; the request cannot be earlier than 14 days before work. When a Bartlett start slips more than 14 days past the original notice, we submit a new request. On Bartlett work, we refresh worn or moved marks through Texas811 before underground work continues.

What site conditions affect directional boring costs near FM 487 in Bartlett?

The scope sets the price, including bore length and size, Branyon clay, pavement, exposed utilities and any creek or Union Pacific crossing. Pits, excavator time, backfill, emergency timing and mobilization also affect the plan. Bartlett’s 357 road miles from Yukon matter when estimating the effort to get crews and equipment to FM 487.

Where the Bartlett facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Bartlett

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Bartlett, Texas

Type the address of your job in Bartlett. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Bartlett

County: Bell County directional boring. Same county: Killeen · Temple · Harker Heights · Fort Hood · Belton · Nolanville · Morgan's Point Resort · Troy · Little River-Academy · Rogers · Pendleton · Round Rock. All counties: Texas county list.