trinityboringsolutions.com

Follett Texas Directional Boring: Acuff Loam, FM 2741 and Ivanhoe Creek

Quick Answer: Can a line pass beneath a Follett road without opening pavement? Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for routes beneath FM 2741 and other Follett streets. Follett is 172 road miles from our Yukon, Oklahoma yard, so a route near Young Street adds mobilization. Acuff soil is mapped across 46 percent of the city, and clay loam at about 40 inches can grip tooling and pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Follett bores at a glance

  • Incorporated city in Lipscomb County, Texas. Population 350 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 172 miles, about 3.9 hours of driving.
  • Ground: Acuff soil is mapped on 46 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 2741, Texas State Highway 15 and FM 1454. State permit office: TxDOT Amarillo District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Follett Municipal Water System, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near FM 2741 in Follett?

Trinity Boring Solutions takes directional boring work in Follett, Lipscomb County, including routes along FM 2741. Can you get a line beneath a Follett street without cutting its pavement? We can bore water, sewer, gas, electric conduit and fiber beneath streets such as Ivanhoe Avenue and Young Street. The Census Bureau Vintage 2024 estimate puts Follett’s population at 350.

Our main office is in Yukon, Oklahoma, and Follett work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, directional boring has been part of our work, building more than four decades of experience for routes through Follett’s mapped Acuff loam and clay loam. Our family business began in 1965, and Trinity stays involved from the first call through the bore log.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Follett ground like around Acuff soil?

Follett’s USDA soil survey maps Acuff soil across 46 percent of the city, with Catesby at 28 percent and Mansker at 10 percent. Acuff loam map units cover 29 percent at 1 to 3 percent slopes and 17 percent at 3 to 5 percent slopes. Loam is the main surface texture at 90 percent, while clay loam accounts for 6 percent. At about 40 inches below the surface, clay loam is mapped across 71 percent and loam across 28 percent. These mapped patterns guide planning, but they are not test borings.

USDA soil survey, inside the Follett city limitsWhat is mapped
Soil series mappedAcuff 46 percent, Catesby 28 percent, Mansker 10 percent, Texroy 7 percent and Quanah 4 percent
Texture at the surfaceloam 90 percent, clay loam 6 percent and silty clay loam 3 percent
Texture about 40 inches downclay loam 71 percent and loam 28 percent
Engineering class about 40 inches downlean clay (CL) 100 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel2 percent of the area

Bedrock is not mapped within the top five feet of Follett, but deeper rock is still possible. The USDA soil survey maps no seasonal water table or flood prone soils, so those conditions are not identified as common planning constraints. High steel corrosion risk is mapped across 2 percent of the area; the line owner should consider casing and tracer wire materials there. The geologic map identifies the Pliocene Ogallala Formation, with sand, silt, clay, gravel and caliche. Clay can ball on a reamer or grip pipe, so staged reaming and timely pullback can help.

How do we bore Follett clay loam?

Follett’s clay loam at about 40 inches calls for a controlled hole and a planned pullback. Near Acuff soil, we adjust the drilling sequence to limit clay buildup on the tooling and pipe.

  1. Acuff loam is Follett’s leading mapped soil series, so we plan staged reaming to manage clay that can collect on the tooling.
  2. At about 40 inches, clay loam is mapped across 71 percent of Follett; we plan the pullback so pipe is ready when the hole is opened.
  3. Before drilling near a marked utility on a Follett route, we expose it with hydrovac potholing because paint near Young Street does not show burial depth.
  4. On a bore beneath FM 2741, we track the drill head from the surface and log depth and pitch as the route advances.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What might a bore near Follett and Ivanhoe Creek cross?

Follett’s mapped highway routes include FM 2741 with 2.0 roadway miles inside the city, Texas State Highway 15 with 1.3 miles, and FM 1454 with 0.7 miles. A bore route can also run beneath Ivanhoe Avenue, the longest named street at 1.27 miles in the city, or Pryor Avenue at 1.08 miles and Young Street at 1.01 miles. Those paved routes make a bore useful where an open cut would disrupt the roadway.

CrossingTypeMapped extentWho has a say
FM 2741State highway2 roadway miles insideState highway office
Texas State Highway 15State highway1.3 roadway miles insideState highway office
FM 1454State highway0.7 roadway miles insideState highway office
Ivanhoe CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Follett or within one mile of its limits, and no street and rail crossings are mapped in the city. Ivanhoe Creek is 0.7 miles from the city limits; no named stream crossing is mapped inside the city, and no lakes or ponds are mapped within one mile. If a proposed route reaches Ivanhoe Creek, its channel crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Who approves a Follett bore in Lipscomb County?

Follett’s city streets belong to the city, while FM 2741, Texas State Highway 15 and FM 1454 are state highways. For work in their right of way, the line owner applies for a TxDOT utility permit through RULIS; the TxDOT Amarillo District reviews it, and we prepare the bore plan and profile for the owner’s application. At a highway crossing, electric, communication, water and pressurized sewer lines need 60 inches of cover below the lowest point of the crossed grade. Along the right of way, electric and communication lines need 48 inches and water lines need 36 inches. TxDOT may set another depth. Existing highway pavement is bored or tunneled, and rural highway crossings extend beneath all travel lanes. A route near Ivanhoe Creek is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What lines serve Follett near Follett Municipal Water System?

Follett Municipal Water System is owned by local government and draws from groundwater wells. Public records list 241 service connections and a population served of 412, so a proposed water bore near Ivanhoe Avenue should be coordinated with the system. Southwestern Public Service and North Plains Electric Cooperative report electric service in Lipscomb County; the line owner for a specific Follett address is confirmed before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Follett Municipal Water SystemPublic water systemGroundwater wells241 connections, 412 people served
Southwestern Public Service and North Plains Electric CooperativeElectric utilities reporting service in Lipscomb CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

For underground work in Lipscomb County, we keep Follett’s 1960 median housing year in view when planning. The survey estimates 50 percent of housing units were built before 1960, 47 percent from 1960 to 1999, and 3 percent in 2000 or later. Work near older Young Street properties may involve replacing existing lines, while newer service work has a different route and connection scope. Before a drill approaches any marked utility on a Follett bore path, we expose it with hydrovac potholing; surface paint shows position, not depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

How far is Follett from Lipscomb and our Yukon yard?

Follett is in Lipscomb County, covers 0.97 square miles and sits at an elevation of 2,610 feet. ZIP code 79034 serves Follett in Lipscomb County, helping us identify the location when coordinating boring work. Darrouzett is 10.2 miles west, Lipscomb is 16.2 miles southwest, and Booker is 22.3 miles west. Higgins is 22.5 miles south. Perryton, the nearest larger city, is 36.6 miles west, while Lipscomb is the county seat. From our Yukon yard, Follett is 172 road miles away and a 3.9 hour drive, a distance that factors into mobilization for work near FM 2741.

Places near Follett

Which jobs call for a bore near Young Street in Follett?

  • Highway crossing: A bore beneath FM 2741 can carry a water line or conduit under the paved route instead of cutting through it.
  • Street service: A water or sewer connection beneath Young Street can avoid opening pavement along the route.
  • Fiber route: Fiber conduit beneath Ivanhoe Avenue can cross the street without an open cut across its paved surface.
  • Creek crossing: If a planned route reaches Ivanhoe Creek, we assess the crossing depth and check federal jurisdiction during planning.
  • Water system work: A connection near Follett Municipal Water System can be planned around its groundwater supply and existing service lines.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Ivanhoe Avenue in Follett?

For a route near Ivanhoe Avenue, start with the address or map pin. Tell us what is going underground, such as a water line or fiber conduit, then give the pipe or conduit size and the footage. A sketch or plans showing the path across Young Street or near FM 2741 helps us understand the route and access.

For crossings on Texas State Highway 15, we price the work according to the job scope. Follett’s clay loam can affect drilling time and tooling; crossings of FM 2741 or pavement add planning and installation demands. Length, pipe size, exposed utilities, pits, excavator time and sand backfill also matter. A route near Ivanhoe Creek brings a crossing condition to assess, and the 172 road miles from Yukon affect mobilization. High profile or emergency work can also change the plan.

Questions people ask about boring in Follett

Does Trinity take directional boring jobs in Follett and Lipscomb County?

Yes, Trinity takes directional boring work in Follett and across Lipscomb County, including routes near FM 2741. Our work is handled by our own crews or satellite yards operated by drilling contractors we have vetted. Near Ivanhoe Creek, we stay involved with you from the first call through the bore log, regardless of which crew is on site.

Will a Follett bore through Acuff soil hit rock?

A Follett bore may encounter rock at depth, but bedrock is not mapped within the top five feet. The geologic map identifies the Pliocene Ogallala Formation, which includes sand, silt, clay, gravel and caliche. That map does not establish conditions at an individual bore location near Acuff soil.

Who approves a Follett bore under FM 2741?

For work in the FM 2741 right of way, the utility owner applies for a TxDOT permit through RULIS, and the TxDOT Amarillo District reviews it. For work along Main Street, we prepare the bore plan and profile the utility owner needs for its application. The permit sets the approved route and cover requirements for the highway crossing.

Can a line be bored under Ivanhoe Creek near Follett?

A line can be planned to pass beneath Ivanhoe Creek, which lies 0.7 miles from Follett’s city limits. The proposed crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The mapped creek location and the route details guide the bore plan.

Who runs Follett Municipal Water System and where does its water come from?

Local government owns Follett Municipal Water System, and its source is groundwater wells. Public records list 241 service connections and a population served of 412. Those system details matter when planning a water line connection near Follett streets such as Ivanhoe Avenue.

Who owns electric lines in Lipscomb County near Follett?

Southwestern Public Service and North Plains Electric Cooperative report electric service in Lipscomb County, but that does not identify the provider at every Follett address. We confirm the line owner before planning an electric conduit bore near a street such as Young Street, then check conduit requirements with that owner.

How much notice does Texas811 need for a Follett bore near Ivanhoe Avenue?

For a bore near Ivanhoe Avenue, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a Lipscomb County bore, if the start slips more than 14 days past the original notice, we make a new request. Worn or moved marks need refreshing through Texas811 before work continues.

How far is Follett from Trinity’s Yukon office, and does Perryton affect the job?

We plan mobilization knowing Follett is 172 road miles and a 3.9 hour drive from our Yukon, Oklahoma main office. Perryton is 36.6 miles west of Follett, but it does not change the Yukon distance used to plan mobilization. The route and access near FM 2741 help determine how that travel factors into the job.

What affects directional boring costs near FM 2741 in Follett?

The route and scope determine the price, including bore length, pipe or conduit size, soil, exposed utilities, pavement, pits and equipment time. Clay loam mapped beneath Follett can affect drilling, while an FM 2741 crossing can add permit and route planning. Mobilization also reflects the distance from the Yukon yard.

Where the Follett facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Follett

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Follett, Texas

Type the address of your job in Follett. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Follett

All counties: Texas county list.