trinityboringsolutions.com

Stanton Texas Directional Boring: Amarillo Fine Sandy Loam, Interstate 20, Union Pacific

Quick Answer: The City of Stanton runs the public water system, while Oncor Electric Delivery Company and Lyntegar Electric Cooperative report electric service in Martin County; confirm the line owner before a bore. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for routes under Interstate 20. Stanton is 409 road miles from our Yukon, Oklahoma yard, and Big Spring is 19.4 miles east. Amarillo fine sandy loam covers much of Stanton, while sandy clay loam below can grip pipe as it swells.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Stanton bores at a glance

  • County seat of Martin County, Texas. Population 2,629 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 409 miles, about 8 hours of driving.
  • Ground: Amarillo soil is mapped on 61 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Interstate 20, Interstate 20 Business, Texas State Highway 137 and FM 2002. State permit office: TxDOT Odessa District.
  • Railroad track inside the boundary: Union Pacific, with 4 mapped street and rail crossings.
  • Public water: City of Stanton, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Stanton, Martin County?

We take directional boring work in Stanton, Martin County, where the Census Bureau Vintage 2024 estimate puts the population at 2,629. Water, sewer, gas, electric conduit and fiber can run beneath School Street or other local routes, with a bore planned around the lines already there. The route and what it carries determine the drilling plan.

Our main office is in Yukon, Oklahoma, and Stanton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965, with directional boring work dating to 1982 and no utility strike in over 25 years. That record matters beside the City of Stanton water lines and electric facilities reported in Martin County.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Stanton and its Amarillo soil?

The USDA soil survey maps Amarillo soil across 61% of Stanton, with Amarillo fine sandy loam map units covering 41% and 19% of the city at different slopes. At about 40 inches below the surface, 83% is mapped as sandy clay loam, and average clay content there is 28%. Fine sandy loam makes up 79% of the mapped surface texture. These are mapped patterns, not test borings, so the exact route still needs field planning.

USDA soil survey, inside the Stanton city limitsWhat is mapped
Soil series mappedAmarillo 61 percent, Midessa 18 percent, Portales 13 percent, Acuff 4 percent and Lipan 3 percent
Texture at the surfacefine sandy loam 79 percent, loam 13 percent and clay 4 percent
Texture about 40 inches downsandy clay loam 83 percent, loam 13 percent and clay 4 percent
Engineering class about 40 inches downlean clay (CL) 96 percent and fat clay (CH) 4 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches4 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel4 percent of the area

Bedrock is not mapped within the top five feet in Stanton, though the geologic map shows Eolian Sheet Sand of Pleistocene age and Cenozoic sedimentary rocks of Paleocene age. A bore still needs to allow for conditions deeper than the mapped depth. Seasonal water table is mapped within 60 inches across 4% of the area, so pits may need pumping. For our Stanton bore planning, flood prone soils are not mapped, so we still verify subsurface conditions along the proposed route. High steel corrosion risk covers 4%, a point for the line owner to consider for steel casing or tracer wire.

How should we plan a Stanton bore through sandy clay loam to manage the soil during installation?

We plan a Stanton bore around the sandy clay loam mapped below the surface and the Amarillo fine sandy loam above it. Clay can hold the hole open, then cling to the reamer or pipe, so the drilling pace and fluid matter.

  1. In Stanton’s sandy clay loam, we use drilling fluid and staged reaming to manage clay that can cling to the reamer or grip the pipe.
  2. Because Amarillo fine sandy loam is common near the surface, we keep the pipe ready before the final ream so the open hole does not sit.
  3. Where a Stanton pit falls in the mapped seasonal water table area, we plan compact pits and pumping to manage water during the work.
  4. For routes near Stanton pavement or utilities, we pothole marked lines and track the drill head from the surface, logging depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Where might a Stanton line go under Interstate 20?

Interstate 20, Interstate 20 Business, Texas State Highway 137 and FM 2002 are mapped within Stanton, so a route may need to pass beneath pavement rather than cut across it. TxDOT records 2.8 roadway miles of Interstate 20 inside the city. School Street is the longest named street at 1.49 miles, followed by Broadway Street at 1.44 miles and Front Street at 1.42 miles. Those streets help define access and the bore path.

CrossingTypeMapped extentWho has a say
Interstate 20Interstate2.8 roadway miles insideState highway office
Interstate 20 BusinessInterstate1.5 roadway miles insideState highway office
Texas State Highway 137State highway1 roadway miles insideState highway office
FM 2002State highway1 roadway miles insideState highway office
Union PacificRailroad1.14 track miles insideThe railroad
Swipe the table sideways to see every column.

Union Pacific has 1.14 track miles inside Stanton on its Toyah Subdivision, and 4 mapped street and rail crossings make track clearance a route concern. A crossing under that track needs an agreement from Union Pacific. No named streams are mapped inside or within one mile of the city, and none of Stanton’s mapped street crossings are crossings of named streams. We can plan the Stanton alignment with no lakes or ponds mapped within one mile while checking the crossing route for site constraints.

Whose permission does a Stanton bore near Union Pacific need?

For work in Stanton’s Interstate 20 right of way, TxDOT’s Odessa District reviews the utility permit, and the utility owner files through the online RULIS system. We prepare the bore plan and profile for that owner and work under its permit. TxDOT rules call for boring or tunneling beneath existing highway pavement; the permit sets the required depth and other conditions. City streets such as School Street belong to the incorporated city. A crossing beneath Union Pacific track needs an agreement from the railroad, which sets crossing conditions such as casing and flagging.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Stanton water system?

The City of Stanton owns the public water system, which uses surface water and reports 1,282 service connections serving 2,657 people. Oncor Electric Delivery Company and Lyntegar Electric Cooperative report electric service in Martin County, but those records do not identify the provider at every Stanton address. We confirm the electric line owner before planning a conduit bore, then pothole marked lines near the route.

Line ownerWhat it isSourceSize
City of StantonPublic water systemSurface water1,282 connections, 2,657 people served
Oncor Electric Delivery Company and Lyntegar Electric CooperativeElectric utilities reporting service in Martin CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Stanton’s median housing year at 1969; 22% of homes were built before 1960, 70% from 1960 to 1999 and 8% in 2000 or later. That mix can mean replacing older water lines as well as adding newer services along streets such as St Mary Street. We hydrovac pothole each marked utility on the planned route before the drill approaches it, since paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Where is Stanton in relation to Big Spring?

Stanton is the Martin County seat, at an elevation of 2,674 feet, and covers 1.99 square miles. We use ZIP code 79782 to identify Stanton in underground project records and coordinate the correct location. Big Spring lies 19.4 miles east and is the nearest larger city; Midland is 20.2 miles west. Stanton is also 25.0 miles from Forsan to the east and 25.2 miles from Garden City to the southeast. Our Yukon, Oklahoma yard is 409 road miles away, an 8.0 hour drive, which affects crew mobilization for Stanton work.

Places near Stanton

Which Stanton jobs call for a bore near School Street?

  • Highway crossing: A bore under Interstate 20 can carry water, sewer or conduit beneath pavement without cutting the travel lanes.
  • Water service: A new service near School Street can connect into the City of Stanton system after the existing line is exposed.
  • Fiber route: Fiber conduit along Broadway Street can pass below pavement and marked utilities rather than follow an open trench.
  • Rail crossing: A utility route under Union Pacific’s Toyah Subdivision needs railroad coordination for its track crossing.
  • Older line replacement: Work near St Mary Street can replace aging water infrastructure while leaving the street surface uncut.
  • Electric conduit: A conduit bore near FM 2002 starts with confirming the line owner reported for the Stanton address.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for directional boring near St Mary Street in Stanton?

For a Stanton quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help show how the route meets a street such as St Mary Street or an Interstate 20 crossing. We use those details to understand the alignment and access before pricing the work.

The Stanton route sets the price, with soil and crossing work first to assess. Sandy clay loam can cling to pipe, and an Interstate 20 or Union Pacific crossing brings added coordination. We also consider bore length, pipe or conduit size, marked utilities to expose, pavement or concrete, pits, excavator time and sand backfill. Mobilization matters because Stanton is 409 road miles from Yukon; emergency or high profile work can add planning needs.

Questions people ask about boring in Stanton

Does Trinity take directional boring jobs in Stanton and Martin County?

Yes. We take directional boring work in Stanton and serve Texas from our Yukon main office. Our own crews and vetted partner contractor yards can staff work in Martin County. You deal with Trinity through the job, from the first call to the bore log, whichever crew is on site.

What ground should I expect for a bore through Amarillo soil in Stanton?

Amarillo soil is the leading mapped series in Stanton, covering 61% of the city. The USDA soil survey maps sandy clay loam at about 40 inches below the surface across 83% of the area. Clay can hold the bore open but may cling to the reamer and grip pipe, so the route and drilling plan matter.

Will a Stanton bore hit rock under School Street?

Bedrock is not mapped within the top five feet under Stanton, but that does not rule out rock deeper down near School Street. The geologic map includes Eolian Sheet Sand of Pleistocene age and Cenozoic sedimentary rocks of Paleocene age. We plan to the mapped information, then adapt to what the bore encounters.

Who approves a Stanton bore under Interstate 20?

TxDOT’s Odessa District reviews a utility permit for work in the Interstate 20 right of way. The utility owner submits the application through RULIS, while we prepare the bore plan and profile. TxDOT rules call for boring or tunneling beneath existing highway pavement, with permit conditions setting the required depth.

What should we account for when planning a Stanton bore beneath Union Pacific track, including crossing coordination and clearance needs?

A crossing beneath Union Pacific’s 1.14 track miles in Stanton needs an agreement from the railroad. The agreement establishes crossing conditions such as casing, depth and flagging. The 4 mapped street and rail crossings in the city make the proposed route and track location important to settle early.

Who runs Stanton’s water system, and where does the water come from?

The City of Stanton owns the public water system, and its source is surface water. Public records list 1,282 service connections serving 2,657 people. Before a bore near School Street or another route, we expose the marked water line so its location and depth are clear.

How far is Stanton from Yukon, and does nearby Big Spring change the job?

Stanton is 409 road miles and an 8.0 hour drive from our Yukon, Oklahoma yard. Big Spring is 19.4 miles east, but the local route, soil and crossings still shape the work. Distance from Yukon affects mobilization, while the Stanton job details determine the drilling plan.

How much 811 notice does a Stanton bore near School Street need?

For a bore near School Street, Texas811 needs a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. That is at least two working days, and the request cannot be made more than 14 days ahead. If marks wear off or move, have them refreshed through Texas811 before work continues.

What affects the price of a Stanton directional bore under Interstate 20?

The Stanton job scope determines the price, especially soil conditions and an Interstate 20 crossing. Length, pipe or conduit size, utilities to expose, pavement, pits and excavator time also matter. A route near Union Pacific may need crossing coordination, and the 409 road miles from Yukon affect mobilization.

Where the Stanton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Stanton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Stanton, Texas

Type the address of your job in Stanton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Stanton

All counties: Texas county list.