Alpine Texas Directional Boring: Musquiz Clay Loam, Union Pacific and Alpine Creek
Quick Answer: From our Yukon main office, Alpine is 592 road miles away, so we staff work with our own crews and vetted drilling partners for crossings such as Union Pacific track. We take directional boring, also called horizontal directional drilling (HDD), work in Alpine, Texas, including beneath US 90. Musquiz soil is common here, with clay mapped about 40 inches down. That sticky ground can grip pipe, so we manage fluid and ream in stages.
Alpine bores at a glance
- County seat of Brewster County, Texas. Population 6,039 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 592 miles, about 11.9 hours of driving.
- Ground: Musquiz soil is mapped on 47 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 10 percent of the area.
- Highways inside the boundary: US 90, US 67, Texas State Highway 118, Texas State Highway 223 and FM 1703. State permit office: TxDOT El Paso District.
- Railroad track inside the boundary: Union Pacific and Texas Pacifico, with 14 mapped street and rail crossings.
- Named streams inside the boundary: Alpine Creek, Moss Creek and Toronto Creek.
- Public water: City of Alpine, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Alpine near Union Pacific track?
From our Yukon yard, Alpine is 592 road miles away, and we staff jobs with our own crews and vetted drilling contractor partners. The Census Bureau Vintage 2024 estimate puts Alpine at 6,039 people in Brewster County. Along Holland Avenue, US 90 or other routes, we install water, sewer, gas, electric conduit and fiber where a buried line needs to reach its connection.
Our main office is in Yukon, Oklahoma, and Alpine work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For work near Alpine Creek or US 90, our range covers 3/4 inch service lines through 48 inch casing, with bores from 10 feet to 5,000 feet. Our family business began in 1965, and we have drilled directionally since 1982.

What does the soil survey show about Alpine and Musquiz soil?
The USDA soil survey maps Musquiz soil across 47 percent of Alpine, with Boracho across 37 percent, Brewster across 10 percent and Bigetty across 4 percent. Musquiz clay loam, on 0 to 3 percent slopes, is the largest mapped unit. At about 40 inches below the surface, clay is mapped under 47 percent of the city area, while very gravelly loam is mapped under 39 percent. In Alpine, we treat mapped patterns as planning context, not as test borings. The clay can cling to a reamer and grip pipe, so the bore plan needs staged reaming and careful fluid control.
| USDA soil survey, inside the Alpine city limits | What is mapped |
|---|---|
| Soil series mapped | Musquiz 47 percent, Boracho 37 percent, Brewster 10 percent and Bigetty 4 percent |
| Texture at the surface | clay loam 47 percent, very gravelly loam 39 percent and very cobbly loam 10 percent |
| Texture about 40 inches down | clay 47 percent, very gravelly loam 39 percent and bedrock 10 percent |
| Engineering class about 40 inches down | lean clay (CL) 51 percent and clayey gravel (GC) 39 percent |
| Average clay content about 40 inches down | 31 percent |
| Bedrock mapped within 60 inches | 10 percent of the area (10 percent hard rock, 0 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 47 percent of the area |
The USDA soil survey maps bedrock within 60 inches across 10 percent of Alpine, and hard bedrock is mapped within that depth in the same share. Typical bedrock depth is 11 inches, so the drill can meet rock sooner than a soil map alone might suggest. Seasonal water table is not mapped; flood prone soils cover 4 percent. High steel corrosion risk is mapped under 47 percent, which matters for steel casing and tracer wire. The map also shows Quaternary alluvial fan deposits and Miocene Cenozoic volcanic rocks, so ground conditions can change along a bore.
What do we need to plan a bore through clay in Alpine?
Musquiz clay loam covers much of Alpine, and the soil survey also maps gravelly ground and shallow bedrock. We match the drilling setup to the ground along each route, not just the soil at the entry pit.
- Musquiz clay loam covers 47 percent of Alpine, so we use thinner fluid and polymer, ream in stages and pull pipe the same day the hole is opened.
- Very gravelly loam is mapped under 39 percent of Alpine at about 40 inches, so staged reaming helps manage ground that can cave behind the bit.
- With bedrock mapped within 60 inches across 10 percent of Alpine, we check depth and pitch as the drill approaches a soil to rock change.
- Before drilling near a marked line on Holland Avenue, we use hydrovac potholing to expose it because locate paint does not show its depth.

Which Alpine roads or tracks does our bore cross near Alpine Creek?
US 90 and US 67 each have 6.2 mapped roadway miles inside Alpine, while Texas State Highway 118 has 4.1 and Texas State Highway 223 has 1.6. FM 1703 also runs through the city. Holland Avenue is the longest named street at 2.53 miles, followed by Sul Ross Avenue at 2.48 and Avenue G at 2.09. A crossing plan needs the exact route, since a bore near a highway or street may also encounter utilities and pavement.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 90 | US highway | 6.2 roadway miles inside | State highway office |
| US 67 | US highway | 6.2 roadway miles inside | State highway office |
| Texas State Highway 118 | State highway | 4.1 roadway miles inside | State highway office |
| Texas State Highway 223 | State highway | 1.6 roadway miles inside | State highway office |
| FM 1703 | State highway | 0.2 roadway miles inside | State highway office |
| Union Pacific | Railroad | 3.21 track miles inside | The railroad |
| Texas Pacifico | Railroad | 1.73 track miles inside | The railroad |
| Alpine Creek | Stream | 2.57 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Moss Creek | Stream | 0.49 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Toronto Creek | Stream | 0.44 channel miles inside | Checked for Corps of Engineers jurisdiction |
Union Pacific has 3.21 track miles in Alpine, and Texas Pacifico has 1.73; the city also has 14 mapped street and rail crossings. A railroad bore needs an agreement with the track owner that sets casing, depth and flagging. Alpine Creek runs 2.57 channel miles, and 24 street crossings of named streams are mapped in the city. Moss Creek and Toronto Creek are also present. A creek route needs a jurisdiction check during planning, while boring can keep pavement and creek banks uncut.
Do I need a permit to bore under US 90 in Alpine?
For a bore beneath US 90, US 67 or another state route in Alpine, the line owner files the utility permit through TxDOT’s RULIS system; the driller does not file it. TxDOT’s El Paso District reviews the application, and we give the utility owner the bore plan and profile. Cover depends on the line: electric and communication crossings need 60 inches below the lowest crossed grade, water crossings need 60 inches, and pressurized sewer crossings need 60 inches. A line running along highway right of way has different cover requirements. Beneath US 90 pavement in Alpine, we follow TxDOT rules calling for boring or tunneling beneath existing highway pavement. Union Pacific and Texas Pacifico crossings need an agreement with the owner of the track. Creek crossings such as Alpine Creek are checked for Army Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities are already in the ground in Alpine near City of Alpine?
The City of Alpine public water system serves 6,000 people through 2,980 service connections and draws from groundwater wells. That means a water bore near Holland Avenue may need to connect to an established system, but the route still needs utility locating. AEP Texas North and Rio Grande Electric Cooperative report electric service in Brewster County. We confirm the line owner before planning an electric conduit bore in Alpine.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Alpine | Public water system | Groundwater wells | 2,980 connections, 6,000 people served |
| AEP Texas North and Rio Grande Electric Cooperative | Electric utilities reporting service in Brewster County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put Alpine’s median housing year at 1979; 26 percent of homes were built before 1960 and 31 percent in 2000 or later. That mix can mean replacement work as well as new service runs. Along Holland Avenue, hydrovac potholing lets us expose marked lines and check their depth before the drill approaches, since locate paint shows position but not depth.

What is near Alpine, including Fort Davis?
Alpine is the county seat of Brewster County, at an elevation of 4,462 feet, and covers 4.83 square miles. Its ZIP code is 79830. Fort Davis is 20.2 miles northwest, Marfa is 21.8 miles west and Marathon is 27.4 miles east. Alpine is the center of the Big Bend area and home to Sul Ross State University. From our Yukon, Oklahoma main office, the road trip is 592 miles and takes 11.9 hours, which is part of planning mobilization for work near Alpine Creek or US 90.
Places near Alpine
- Directional boring in Fort Davis: 20.2 miles northwest
- Directional boring in Marfa: 21.8 miles west
- Directional boring in Marathon: 27.4 miles east
- Directional boring in Balmorhea: 43 miles north
What boring work comes up along Holland Avenue in Alpine?
- Highway crossing: A bore under US 90 can carry water or conduit beneath pavement without cutting the travel lanes.
- Water service: A connection near Holland Avenue can link a property to the City of Alpine groundwater system.
- Fiber route: A run along Avenue East can place communication conduit below pavement and marked utilities.
- Creek crossing: A route under Alpine Creek can avoid an open cut across the channel and banks.
- Rail crossing: A bore beneath Union Pacific track needs the railroad owner’s agreement for casing, depth and flagging.
- Campus service: A bore near Sul Ross State University can carry water, sewer or conduit across a paved route.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for an Alpine bore near Avenue East?
A map pin helps us see whether the route is near Avenue East, Alpine Creek or a highway crossing. To plan Alpine work, tell us what will go in the ground, the pipe or conduit size, and the footage. A sketch or plans help us see entry and exit pits, pavement and nearby utilities before we set the scope.
The drive from Yukon affects mobilization for an Alpine job. Musquiz clay and mapped gravelly ground can change drilling time, and the 10 percent bedrock area can call for a different setup. We also account for length, pipe size, utilities to expose, pavement, creek crossings, pits, excavator time and sand backfill. A route under Union Pacific track or beside US 90 may add coordination and permit planning.
Questions people ask about boring in Alpine
Does Trinity Boring Solutions take directional boring jobs in Alpine and Brewster County?
Yes. We take directional boring work in Alpine and across Texas, and the job is managed through Trinity from the first call to the bore log. Our main office is in Yukon, and Alpine work is staffed by our crews and vetted drilling contractor partners. Send the location and scope near a feature such as US 90 or Alpine Creek.
What ground should I expect on an Alpine bore through Musquiz soil?
The USDA soil survey maps Musquiz soil across 47 percent of Alpine, mainly as clay loam. At about 40 inches below the surface, clay is mapped under 47 percent of the area and very gravelly loam under 39 percent. Clay can cling to the reamer, so we plan staged reaming and fluid control for a route near Holland Avenue or elsewhere in town.
Is there rock on an Alpine bore route?
It is possible. The soil survey maps bedrock within five feet across 10 percent of Alpine, and that mapped bedrock is hard rather than weathered. Typical bedrock depth is 11 inches. A route near Alpine Creek may stay in soil, but a bore plan still needs to account for mapped changes in ground along the alignment.
Who approves our bore beneath US 90 in Alpine before we plan that highway crossing?
The line owner applies for a utility permit through TxDOT’s RULIS system, and TxDOT’s El Paso District reviews work in Brewster County. We provide the bore plan and profile for the filing. For US 90, required cover depends on the line being installed, and Beneath US 90 pavement in Alpine, we follow TxDOT rules calling for boring or tunneling beneath existing highway pavement.
What does a bore under Union Pacific track in Alpine require?
It requires an agreement with Union Pacific, which owns 3.21 track miles in Alpine. That agreement sets the casing, depth and flagging requirements for the crossing. If the line also occupies highway right of way, TxDOT asks for a copy. The route and its relationship to the local streets need to be shown in the crossing plan.
Can a utility line be bored under Alpine Creek in Alpine?
A bore can be planned beneath Alpine Creek, which runs 2.57 channel miles inside the city. When we plan an Alpine crossing, we check whether it falls under US Army Corps of Engineers jurisdiction. We also plan the route and depth to stay below the channel and use pits on the banks rather than cutting across them.
Does Trinity cover Fort Davis and rural sites near Alpine?
Yes. We take work beyond Alpine, including Fort Davis, 20.2 miles northwest, and rural sites in the surrounding Big Bend area. The Yukon office is 592 road miles from Alpine, so the distance and access affect mobilization planning. A map pin near Fort Davis or another Brewster County location helps us review the route.
How much notice does Texas811 need for a bore along Holland Avenue in Alpine?
For a bore along Holland Avenue, request locates through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For Alpine excavation scheduling, we use Texas811’s stated notice period of at least two working days. If work slips more than 14 days past the notice, request a new ticket; refresh worn or moved marks before continuing.
What affects the cost of a directional bore near US 90 in Alpine?
In Alpine, we price the work from the job scope, including the crossing requirements. For an Alpine route, factors include the 592 road miles from Yukon, bore length, pipe size, Musquiz clay or gravelly ground, and how many utilities need exposure. Pavement, a creek crossing such as Alpine Creek, pits, excavator time, backfill, emergency timing and a railroad or highway crossing can also affect the work.
Where the Alpine facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Alpine
- U.S. Census Bureau, TIGER/Line 2024: Alpine boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Alpine
- U.S. Census Bureau, American Community Survey 2019 to 2023: Alpine housing units and year built
- Macrostrat geologic map compilation: map units under Alpine
- U.S. EPA Safe Drinking Water Information System: public water systems serving Alpine
- U.S. Department of Transportation, North American Rail Network: track owners in Brewster County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Brewster County
- U.S. Geological Survey, Elevation Point Query Service: Alpine elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Alpine
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Alpine
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Alpine, Texas
Type the address of your job in Alpine. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Alpine
Same county: Study Butte · Terlingua. All counties: Texas county list.
