Girard Texas Directional Boring: Weymouth Clay Loam, Texas State Highway 70, Duck Creek
Quick Answer: Texas State Highway 70 runs through Girard, where we do directional boring, also called horizontal directional drilling (HDD), to route lines beneath roads without cutting the surface. Washington Avenue is the longest named street, and 314 road miles separate Girard from our Yukon, Oklahoma main office. Weymouth clay loam is mapped across 37 percent of the community, so sticky soil can build on a reamer and grip pipe. Staged reaming and a timely pull help manage that ground.
Girard bores at a glance
- Unincorporated community in Kent County, Texas. Population 53 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 314 miles, about 6.3 hours of driving.
- Ground: Weymouth soil is mapped on 37 percent of the area, with clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 40 percent of the area.
- Highways inside the boundary: Texas State Highway 70 and FM 643. State permit office: TxDOT Abilene District.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near Duck Creek in Girard?
We take directional boring work in Girard, an unincorporated community in Kent County with a 2020 Census count of 53 people. A water service could run beneath Washington Avenue, while electric conduit or fiber may follow a route along Texas State Highway 70. We also install sewer and gas lines, with the route and crossings planned for the specific address.
Our main office is in Yukon, Oklahoma, and Girard work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet under the Arkansas River in Tulsa; beside that reach, a Girard job may be a shorter service line beneath Washington Avenue or Texas State Highway 70. We have been a family business since 1965 and have done directional boring since 1982.

How does Weymouth soil affect a bore in Girard?
The USDA soil survey maps Weymouth soil across 37 percent of Girard, with Weymouth clay loam on 1 to 3 percent slopes as the largest listed map unit. Sagerton clay loam is also mapped, and clay loam makes up 77 percent of the mapped surface texture and 77 percent of the texture at about 40 inches. Average clay content at that depth is 31 percent. These mapped patterns are not test borings; sticky clay loam can collect on a reamer and tighten around pipe, so the exact route still needs field planning.
| USDA soil survey, inside the Girard mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Weymouth 37 percent, Sagerton 34 percent, Miles 11 percent, Abilene 6 percent and Berda 5 percent |
| Texture at the surface | clay loam 77 percent, fine sandy loam 15 percent and silt loam 4 percent |
| Texture about 40 inches down | clay loam 77 percent, sandy clay loam 11 percent and fine sandy loam 5 percent |
| Engineering class about 40 inches down | lean clay (CL) 82 percent and clayey sand (SC) 15 percent |
| Average clay content about 40 inches down | 31 percent |
| Bedrock mapped within 60 inches | 40 percent of the area (0 percent hard rock, 40 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 6 percent of the area |
Weathered bedrock is mapped within 60 inches across 40 percent of Girard, with typical bedrock depth at 28 inches; hard bedrock is not mapped in that interval. The Permian age Whitehorse Group, undivided, includes sandstone, shale, gypsum and dolostone, so a route may move from soil into slower, weathered rock. Seasonal water tables are not mapped, while flood prone soils cover 4 percent and high steel corrosion risk covers 6 percent. Those mapped conditions guide pit placement and casing discussions, but the line owner selects any steel protection.
How do crews handle Girard clay loam?
Weymouth and Sagerton clay loam dominate the mapped surface in Girard. We plan the fluid and reaming sequence for that sticky ground, then track the drill as it passes beneath local roads or drainage.
- Fluid and reaming: Weymouth clay loam is common in Girard, so we use a controlled fluid approach and staged reaming to limit sticky buildup around the reamer.
- Pipe timing: With clay loam mapped at about 40 inches, we prepare pipe before the final ream and plan to pull it while the hole is ready.
- Rock transition: Weathered bedrock is mapped in parts of Girard near 28 inches, so we allow for slower drilling and check steering as ground conditions change.
- Utility exposure: Before drilling near any marked line on a Washington Avenue route, we hydrovac pothole it; paint indicates position but does not show depth.

Where does a line have to go under Texas State Highway 70 in Girard?
Texas State Highway 70 and FM 643 run inside Girard’s mapped community boundary, with 1.1 mapped roadway miles of the former and 0.6 of the latter. Washington Avenue is the longest named street at 0.54 miles; public road centerlines total 10.88 miles, though the records name only that one street. A line crossing either highway needs a bore plan that accounts for the road surface and right of way. Boring keeps the pavement and Washington Avenue intact while pits sit in the dirt beyond the crossing.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 70 | State highway | 1.1 roadway miles inside | State highway office |
| FM 643 | State highway | 0.6 roadway miles inside | State highway office |
| Duck Creek | Stream nearby | 1 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Girard or within 1 mile outside the community boundary, and no street and rail crossings are mapped inside it. No named stream runs inside the boundary either. Duck Creek is mapped 1.0 mile beyond it, and no street crossings of named streams are mapped inside Girard. Unnamed drainage totals 3.96 miles in the community, so a proposed route near a drainage channel needs its own crossing review; no lakes or ponds are mapped within 1 mile.
Whose permission does a Girard bore in Kent County need?
Girard has no city government, so a street approval is handled by the county or by the state for a state road. For work in the right of way of Texas State Highway 70 or FM 643, TxDOT’s Abilene District reviews the utility permit. The utility that owns the line files through TxDOT’s RULIS system; we prepare the bore plan and profile and work under that owner’s permit. TxDOT rules call for boring or tunneling beneath existing highway pavement, with rural highway bores extending beneath all travel lanes. A route near Duck Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines in Kent County near Girard?
The water provider for a specific Girard address has to be confirmed with the county or local water district before a bore is planned; the available records do not match a provider to this community. Utilities reporting electric service in Kent County are AEP Texas North, Oncor Electric Delivery Company, Big Country Electric Cooperative and South Plains Electric Cooperative. We confirm the line owner for the route before planning an electric conduit bore along Washington Avenue or another local road.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas North, Oncor Electric Delivery Company, Big Country Electric Cooperative and South Plains Electric Cooperative | Electric utilities reporting service in Kent County | EIA Form 861 | Confirm the line owner by address |
Housing data are not published for a place as small as Girard, so a housing age estimate cannot reliably show which buried lines are old. For a service along Texas State Highway 70 or Washington Avenue, the route and line owner help distinguish a replacement from a new connection. June averages 3.2 inches of precipitation and January 0.8 inches, useful context for pit planning. We hydrovac pothole each marked utility on the bore path before drilling near it; if a marked line is under Washington Avenue, we expose it first because paint shows position, not depth.

Where is Girard in relation to Spur and Jayton?
Girard is an unincorporated community in Kent County, covering 1.45 square miles at an elevation of 2,132 feet. Its ZIP code is 79518. Jayton, the county seat, is 9.2 miles southeast; Spur is 13.5 miles northwest, and Dickens is 20.5 miles northwest. Guthrie is 26.2 miles northeast and Aspermont is 29.5 miles southeast. From our Yukon, Oklahoma main office, Girard is 314 road miles away and about a 6.3 hour drive, which is part of planning mobilization for a bore near Texas State Highway 70.
Places near Girard
- Directional boring in Jayton: 9.2 miles southeast
- Directional boring in Spur: 13.5 miles northwest
- Directional boring in Dickens: 20.5 miles northwest
- Directional boring in Guthrie: 26.2 miles northeast
- Directional boring in Aspermont: 29.5 miles southeast
Which jobs call for a bore near Duck Creek in Girard?
- Highway crossing: A route beneath Texas State Highway 70 is planned as a bore through the right of way, with the utility owner handling the permit filing.
- Street service: A water or sewer connection beneath Washington Avenue can leave the street surface uncut, with pits set in dirt on either side.
- Electric conduit: Before conduit follows a route near FM 643, we confirm the line owner and expose marked utilities along the planned path.
- Drainage crossing: A proposed bore near Girard’s 3.96 miles of unnamed drainage needs a route review, and a Duck Creek crossing is checked for federal jurisdiction.
- Fiber route: Fiber conduit along Texas State Highway 70 can be installed by directional boring, with the bore profile planned for the highway crossing.
- Water service: For a service near the Girard community boundary, the provider for that address is confirmed with the county or local water district first.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore on Washington Avenue in Girard?
For a Washington Avenue quote, send the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help. Those details show whether the route stays beneath a local street or reaches Texas State Highway 70, and what access the pits need.
In Girard, soil and rock conditions are the first price drivers: Weymouth clay loam covers 37 percent of the mapped area, and weathered bedrock is mapped in part of the upper five feet. Next, we look at the line size and length, utilities to expose, pavement at Texas State Highway 70, drainage crossings and pit or excavator needs. Mobilization also reflects the 314 road miles from Yukon. Emergency timing or a high profile crossing can add planning and equipment demands.
Questions people ask about boring in Girard
Does Trinity take directional boring jobs in Girard, Kent County, and how are crews assigned?
Yes. We take work in Girard, Kent County, and keep the customer’s contact with Trinity from the first call through the bore log. Our crews may work from the Yukon office or a satellite yard run by a partner contractor we have vetted. Texas State Highway 70 and Washington Avenue are examples of local route features we plan around.
Can a line be bored beneath Duck Creek near Girard?
A bore can be planned for a Duck Creek crossing, but the route and conditions need review before work is set. The creek is mapped 1.0 mile outside Girard’s community boundary, and a creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. A field plan sets the path and pit locations.
Who owns electric lines in Girard, Kent County, and who confirms conduit requirements?
The specific electric line owner has to be confirmed for the Girard address before we plan conduit. AEP Texas North, Oncor Electric Delivery Company, Big Country Electric Cooperative and South Plains Electric Cooperative report service in Kent County, but that does not establish which one serves a particular Washington Avenue property. The owner confirms the conduit specifications for its line.
Who is in charge of Girard streets in Kent County, and must Washington Avenue be cut?
Girard is unincorporated and has no city government, so street authority rests with the county or, for a state road, the state. A directional bore can pass beneath Washington Avenue without cutting its surface, with entry and exit pits placed in dirt. The route still needs utility locates and any applicable road approval.
Can the age of Girard housing in Kent County tell me whether buried lines need replacement?
No reliable housing age figures are published for Girard because the place is too small for a dependable survey sample. That means housing age alone cannot identify a line for replacement. For a route near FM 643, we check the actual marked utilities and pothole those on the bore path before drilling close to them.
What ground should I expect in Girard around Weymouth soil?
The USDA soil survey maps Weymouth clay loam across 37 percent of Girard, and clay loam accounts for 77 percent of the texture at about 40 inches. That ground can stick to a reamer and grip pipe, so a bore plan may use staged reaming and careful timing. The survey describes mapped patterns, not site test borings.
Can I reach Trinity after hours for an urgent bore in Girard, Kent County?
Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, including for urgent work near Texas State Highway 70 in Girard. Tell us the location and what the line serves so we can understand the immediate scope. Emergency timing can affect the equipment and planning required.
How much notice does a Washington Avenue bore in Girard need, and what if marks move?
For a Washington Avenue excavation, Texas law requires a Texas811 locate request at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If work slips more than 14 days past the notice, make a new request. Worn or moved marks must be refreshed through Texas811 before work continues.
What affects the cost of a directional bore under Texas State Highway 70 in Girard?
The main factors are bore length and size, Weymouth clay loam or weathered bedrock along the route, utilities that need exposure, pavement, drainage crossings, pits and equipment time. A Texas State Highway 70 right of way adds permit planning, while Girard’s 314 road miles from Yukon affect mobilization. The site and scope determine the work involved.
Where the Girard facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Girard
- U.S. Census Bureau, TIGER/Line 2024: Girard boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Girard population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Girard housing units and year built
- Macrostrat geologic map compilation: map units under Girard
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Kent County
- U.S. Geological Survey, Elevation Point Query Service: Girard elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Girard
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Girard
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Girard, Texas
Type the address of your job in Girard. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Girard
All counties: Texas county list.
