trinityboringsolutions.com

Tuleta Texas Directional Boring: Weesatche Fine Sandy Loam, US 181, Medio Creek

Quick Answer: Weesatche fine sandy loam and Medio Creek crossings shape directional boring Tuleta TX, where Trinity Boring Solutions uses horizontal directional drilling (HDD) to place lines without opening the creek bank. Tuleta is 526 road miles from our Yukon, Oklahoma main office, and US 181 runs through the community. Sandy clay loam is the leading mapped surface texture. Clay can cling to a reamer, so crews control fluid and work through staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Tuleta bores at a glance

  • Unincorporated community in Bee County, Texas. Population 231 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 526 miles, about 10.2 hours of driving.
  • Ground: Weesatche soil is mapped on 28 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 181. State permit office: TxDOT Corpus Christi District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Medio Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring on King Lane in Tuleta?

Weesatche fine sandy loam is part of the ground we plan around when taking directional boring work in Tuleta, an unincorporated community in Bee County. The 2020 Census counted 231 people here; the Census Bureau does not publish yearly estimates for unincorporated places. Water, sewer, gas, electric conduit and fiber lines can be routed along streets such as King Lane or Damron Street, with the path set by the site and existing utilities.

Our main office is in Yukon, Oklahoma, and Tuleta work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965 and has done directional boring since 1982. We have gone more than 25 years without a utility strike, a record we bring to planning around the electric providers reporting service in Bee County, including AEP Texas Central.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should a bore expect in Tuleta near Weesatche soil?

Weesatche soil is the most common mapped series in Tuleta at 28 percent, with Weesatche fine sandy loam on 1 to 3 percent slopes as the leading map unit. The USDA soil survey maps sandy clay loam across 44 percent of the surface and fine sandy loam across 42 percent. About 40 inches down, sandy clay loam covers 48 percent of the mapped area, while the average clay content there is 25 percent. These are soil survey patterns, not test borings. Clay can stick to the tooling and grip pipe, so the actual route and drilling response matter.

USDA soil survey, inside the Tuleta mapped community boundaryWhat is mapped
Soil series mappedWeesatche 28 percent, Parrita 27 percent, Blanconia 11 percent, Clareville 8 percent and Papagua 8 percent
Texture at the surfacesandy clay loam 44 percent, fine sandy loam 42 percent and loamy fine sand 12 percent
Texture about 40 inches downsandy clay loam 48 percent, loam 27 percent and sandy clay 10 percent
Engineering class about 40 inches downlean clay (CL) 44 percent, silty clay (CL ML) 27 percent and clayey sand (SC) 14 percent
Average clay content about 40 inches down25 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches20 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel22 percent of the area

The USDA soil survey does not map bedrock within 60 inches in Tuleta, but the Goliad Formation beneath the area is mapped as Miocene clay, sandstone, marl, caliche, limestone and conglomerate. A bore may meet firmer material deeper down. Seasonal water tables are mapped within 60 inches across 20 percent of the area, so pits near Medio Creek may need pumping. Flood prone soils cover 6 percent, and high steel corrosion risk covers 22 percent; the line owner should consider casing and tracer wire materials for the specific ground.

How do crews bore Tuleta’s sandy clay loam?

Tuleta’s sandy clay loam and fine sandy loam need different fluid control from the firmer clay mapped deeper down. We adjust the bore to the ground and the route, including work near Medio Creek.

  1. In Tuleta’s sandy clay loam, we keep fluid controlled and ream in stages so sticky cuttings do not build up on the tooling.
  2. Where fine sandy loam appears along King Lane, we support the bore path with drilling fluid and have pipe ready before the final ream.
  3. With seasonal water tables mapped in parts of Tuleta, pits near Medio Creek may need pumping and a compact work area.
  4. At US 181 or Damron Street, we pothole marked utilities first, then track the drill head and log depth and pitch.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Which roads, tracks or creeks can a Tuleta bore cross near Medio Creek?

US 181 is the mapped US highway running through Tuleta, with 3.5 roadway miles inside the community boundary. The longest named streets include King Lane at 1.08 miles, Huisache Lane at 1.0 mile and Damron Street at 0.83 miles. A bore under US 181 or one of these local streets can keep pavement intact, but its route must account for the road corridor and marked utilities. No other highway is listed within 1.5 miles outside the boundary.

CrossingTypeMapped extentWho has a say
US 181US highway3.5 roadway miles insideState highway office
Medio CreekStream5.22 channel miles insideChecked for Corps of Engineers jurisdiction
Toro CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Dry Medio CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Boggy CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Tuleta or within 1 mile outside the community boundary, and none of the mapped street and rail crossings is identified here. Medio Creek runs for 5.22 channel miles inside the community, with three mapped street crossings of named streams. No lakes or ponds are mapped within 1 mile. Creek work needs a route planned below the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Whose permission does a Tuleta bore in Bee County need?

Tuleta is an unincorporated community, so it has no city government; Bee County or the state handles roads and permits according to who controls the route. For a bore under US 181, TxDOT’s utility rules set cover at 60 inches for electric and communication crossings and 60 inches for water crossings; the district can require a different depth. The utility owner files for a right of way permit through TxDOT’s RULIS system, reviewed by the Corpus Christi District, while we prepare the bore plan and profile. TxDOT rules call for boring beneath existing highway pavement. Medio Creek crossings are checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities should a Tuleta crew check in Bee County?

The water provider for a specific Tuleta address has to be confirmed with Bee County or the local water district before a bore is planned. Electric service reported in Bee County includes AEP Texas Central, Karnes Electric Cooperative and San Patricio Electric Cooperative; that county listing does not identify the provider at every address. Before a conduit route near King Lane or US 181 is drilled, we hydrovac pothole marked utilities to find their depth and confirm the line owner.

Line ownerWhat it isSourceSize
AEP Texas Central, Karnes Electric Cooperative and San Patricio Electric CooperativeElectric utilities reporting service in Bee CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Tuleta’s median housing year at 1995. The estimates show 1 percent of homes built before 1960, 68 percent from 1960 to 1999 and 31 percent from 2000 onward. A replacement bore along Huisache Lane may need to avoid older buried lines, while a new service has to clear the existing route. We expose marked lines with hydrovac before drilling near them.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Do you cover Tuleta and nearby Beeville?

Tuleta is in Bee County, 12.2 miles north of Beeville, the county seat and nearest larger city. The community is 4.47 square miles, sits at an elevation of 320 feet and uses ZIP code 78162. Pettus is 2.8 miles north, while Normanna is 3.5 miles south. We take work in Tuleta and rural sites around these nearby places. The route from our Yukon, Oklahoma main office is 526 road miles and takes 10.2 drive hours, so distance is part of planning mobilization.

Places near Tuleta

What boring work may come up on Damron Street in Tuleta?

  • Highway crossing: A bore under US 181 can place a water line or conduit beneath the highway without cutting across its pavement.
  • Street service: A water or sewer service along Damron Street can be routed by bore around pavement and existing marked utilities.
  • Fiber route: Fiber conduit near King Lane can follow a planned path with potholes to check marked lines before drilling.
  • Creek crossing: A Medio Creek bore needs a route beneath the channel and a check for federal jurisdiction during planning.
  • Electric conduit: A conduit route near Huisache Lane needs the electric line owner confirmed before the bore is planned.
  • Rural service: A longer service near Pettus can be scoped around the address, footage, line size and access for pits.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Tuleta bore under US 181?

For a Tuleta quote, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage; a sketch or plans can help show the route near US 181 or Medio Creek. Those details let us assess access, crossings and the likely bore layout before we set the scope.

A short service with a clear route away from US 181 and Medio Creek is simpler to plan than a longer bore with pavement or creek work. Price reflects footage, pipe size, soil, utility exposures, pavement, drainage crossings, pits, excavator time and sand backfill. Tuleta’s sandy clay loam can affect reaming, while a creek crossing may add planning steps. The 526 road miles from Yukon also affect mobilization. Emergency or high profile work can change the scope.

Questions people ask about boring in Tuleta

Does Trinity take directional boring work in Tuleta and Bee County, and who does the field work?

Yes. We take directional boring work in Tuleta and Bee County, using our own crews and vetted drilling partners based from satellite yards. You work with Trinity from the first call through the bore log, whichever crew is on site. For a route near US 181, we plan around the highway and the marked utilities.

Who is responsible for Damron Street in Tuleta, and does a bore require cutting it?

Tuleta is an unincorporated community with no city government, so Bee County or the state is responsible for streets depending on the road. A bore on Damron Street can often pass below the surface without opening the pavement. The route still needs utility checks and any required approval from the road authority.

How old are Tuleta homes and buried lines near Huisache Lane, and what does that mean for replacement bores?

The American Community Survey 2019 to 2023 five year estimates give Tuleta a median housing year of 1995. A bore replacing a line near Huisache Lane may encounter existing utilities that do not follow current surface clues. We use Texas811 markings and hydrovac potholes to expose marked lines before the drill approaches.

Can groundwater or flooding affect bore pits near Medio Creek in Tuleta?

It can. The USDA soil survey maps a seasonal water table within 60 inches across 20 percent of Tuleta, and flood prone soils across 6 percent. Near Medio Creek, crews may need smaller pits and pumping, with the bore planned below the channel. Creek crossing plans are checked for federal jurisdiction.

What soil does a Tuleta bore pass through around Weesatche?

Weesatche is the largest mapped soil series in Tuleta at 28 percent. Sandy clay loam is mapped across 48 percent of the area at about 40 inches below the surface. Clay can cling to the reamer and grip pipe, while the USDA survey describes mapped patterns rather than the exact soil at an individual address.

Will a Tuleta bore hit rock?

Bedrock is not mapped within the top five feet in Tuleta, but that does not rule out harder material deeper down. The geologic map identifies the Miocene Goliad Formation, which includes clay, sandstone, marl, caliche, limestone and conglomerate. A site specific route and drilling response determine the tooling needed.

Does Trinity cover Pettus and rural sites outside Tuleta?

Yes. We take work in Tuleta, Pettus and rural sites in Texas. Pettus is 2.8 miles north of Tuleta, but a specific site’s access, route and footage still shape the plan. Trinity remains your contact from the initial scope through the bore log, regardless of which crew is on site.

How much notice does Texas811 need for a Tuleta bore near King Lane, and what if marks move?

Texas811 requests must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a King Lane start moves more than 14 days past the original notice, submit a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring in Tuleta near US 181?

The job scope sets the price, with length, pipe or conduit size, soil, utility exposures, pavement and creek crossings among the factors. Work near US 181 may need highway permitting and a deeper bore profile; Medio Creek adds crossing planning. Mobilization also reflects Tuleta’s 526 road miles from the Yukon main office.

Where the Tuleta facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Tuleta

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Tuleta, Texas

Type the address of your job in Tuleta. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Tuleta

Same county: Skidmore · Tynan · Pawnee. All counties: Texas county list.