trinityboringsolutions.com

Hamilton Texas Directional Boring: Nuff Soil, Pecan Creek And Highway 22

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), in Hamilton, Texas, for routes beneath Rice Street and other city streets. Hamilton is 314 road miles from our Yukon, Oklahoma main office, and we staff work near Texas State Highway 22 with our own crews and vetted partner drilling contractors. Nuff soil and the mapped clay can cling to tooling and pipe, so we plan the reaming and pull carefully. Pecan Creek routes also need attention to channel depth.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Hamilton bores at a glance

  • County seat of Hamilton County, Texas. Population 3,005 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 314 miles, about 6.3 hours of driving.
  • Ground: Nuff soil is mapped on 34 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 18 percent of the area.
  • Highways inside the boundary: Texas State Highway 22, Texas State Highway 36, FM 3302, FM 2905 and FM 218. State permit office: TxDOT Waco District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Pecan Creek and Twomile Creek.
  • Public water: City of Hamilton, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Does anyone do directional boring in Hamilton County?

Hamilton is 314 road miles from our Yukon main office, and we staff Rice Street work with our own crews and vetted partner drilling contractors. The Census Bureau Vintage 2024 estimate puts Hamilton County’s seat at 3,005 people. On routes along Coke Street or Main Street, we install water, sewer, gas, electric conduit and fiber by boring beneath pavement instead of cutting across it.

Our main office is in Yukon, Oklahoma, and Hamilton work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, with directional boring work dating to 1982. That experience covers lines from 3/4 inch service runs to 48 inch casing, useful for the range of street and utility work around Hamilton.

Trinity Boring Solutions Ditch Witch JT922 HDD rig and vacuum excavation truck on a commercial bore in Oklahoma City
Our Ditch Witch JT922 drill and vacuum excavation truck on a commercial bore in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Nuff soil like to bore in Hamilton?

The USDA soil survey maps Nuff soil across 34% of Hamilton, including Nuff very stony silty clay loam on 33% of the mapped area. At about 40 inches below the surface, clay is mapped under about 40% of the area, and the average clay content there is 39%. Heavy clay is mapped across 59%, while sandy ground is not mapped at that depth. Clay can hold an open bore but stick to the reamer and grip pipe, so the hole needs a controlled, staged approach.

USDA soil survey, inside the Hamilton city limitsWhat is mapped
Soil series mappedNuff 34 percent, Fairy 20 percent, Frio 16 percent, Real 6 percent and Slidell 6 percent
Texture at the surfacevery stony silty clay loam 33 percent, very fine sandy loam 20 percent and silty clay 19 percent
Texture about 40 inches downclay 40 percent, sandy clay loam 20 percent and bedrock 18 percent
Engineering class about 40 inches downelastic silt (MH) 34 percent, fat clay (CH) 24 percent and lean clay (CL) 20 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inches18 percent of the area (6 percent hard rock, 12 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils16 percent of the area
High corrosion risk for uncoated steel58 percent of the area

Bedrock is mapped within 60 inches across 18% of Hamilton, with hard bedrock across 6% and weathered bedrock across 12%; the typical mapped depth is 17 inches. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 16%, including along Pecan Creek. High steel corrosion risk is mapped across 58%, so the line owner should consider casing and tracer wire materials. The geologic map names Paluxy Sand and Glen Rose Limestone, undivided, of Early Cretaceous age; contact between soil and rock can push a drill head off line.

How do we drill Hamilton clay?

Hamilton’s Nuff silty clay loam and mapped clay call for measured fluid use and staged reaming. Along streets such as Rice Street, we track the head from the surface and log depth and pitch as the bore advances.

  1. Nuff soil is mapped as very stony silty clay loam, so we use thinner fluid with polymer and ream in stages to manage sticky cuttings.
  2. With heavy clay mapped across 59% of Hamilton, we watch fluid returns closely and keep pressure controlled beneath pavement near Rice Street.
  3. We expose every marked utility on the bore path with hydrovac before drilling near it; paint along Coke Street shows location, not burial depth.
  4. Pecan Creek has 1.79 channel miles in Hamilton, so we track depth and pitch through each rod and plan the bore below the channel.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

Which roads, tracks or creeks might a Hamilton bore cross near Rice Street?

Texas State Highway 22 has 3.5 mapped roadway miles inside Hamilton, and Texas State Highway 36 has 1.8. FM 3302, FM 2905 and FM 218 also run within the limits, while US 281 is 0.4 miles outside them. Rice Street is the longest named street at 1.91 miles, followed by Coke Street at 1.54 and Main Street at 1.51. A route beneath these paved corridors is planned as a bore, with pits placed off the travel surface.

CrossingTypeMapped extentWho has a say
Texas State Highway 22State highway3.5 roadway miles insideState highway office
Texas State Highway 36State highway1.8 roadway miles insideState highway office
FM 3302State highway0.5 roadway miles insideState highway office
FM 2905State highway0.3 roadway miles insideState highway office
FM 218State highway0.3 roadway miles insideState highway office
US 281Highway nearby0.4 miles outsideState highway office
Pecan CreekStream1.79 channel miles insideChecked for Corps of Engineers jurisdiction
Twomile CreekStream0.79 channel miles insideChecked for Corps of Engineers jurisdiction
Little Cowhouse CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Logan BranchStream nearby0.6 miles outsideChecked for Corps of Engineers jurisdiction
City LakeLake or pond36 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Hamilton or within one mile outside the limits, so no local track crossing is identified. Pecan Creek runs 1.79 channel miles in the city and Twomile Creek runs 0.79; mapped street crossings of named streams total 11. City Lake covers 36 acres inside the limits. A bore near Pecan Creek or City Lake needs a planned route and a check for federal waterway jurisdiction.

Who permits a Hamilton bore under Texas State Highway 22?

For a bore in Texas State Highway 22 right of way, the utility owner files the TxDOT utility application in RULIS; we give the owner the bore plan and profile, then work under its permit. TxDOT’s Waco District reviews Hamilton County applications. Electric and communication lines need 60 inches of cover at highway crossings and 48 inches along the right of way; water needs 60 inches at crossings and 36 inches along it, while pressurized sewer needs 60 inches at crossings. The permit can set another depth.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground near the City of Hamilton system?

The City of Hamilton public water system uses purchased surface water and reports 1,499 service connections serving 2,895 people. For a water bore near that system, the planned route still needs to match the line owner’s location. Electric service reported in Hamilton County includes Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative Service. We confirm the line owner for a specific address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of HamiltonPublic water systemSurface water bought from another system1,499 connections, 2,895 people served
Texas-New Mexico Power, Hamilton County Electric Cooperative Association, Heart of Texas Electric Cooperative and United Electric Cooperative ServiceElectric utilities reporting service in Hamilton CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The 1961 median housing year gives us a planning reference for underground work along Rice Street in Hamilton. The survey estimates 48% of homes were built before 1960, 47% from 1960 to 1999 and 5% in 2000 or later. That mix can mean replacement lines as well as new service runs near Gentry Street. We hydrovac pothole each marked utility on the bore path before drilling near it; for a route under Rice Street, paint shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Hamilton in relation to Carlton?

Hamilton is the incorporated county seat of Hamilton County, at an elevation of 1,170 feet and covering 3.47 square miles. We use ZIP code 76531 to identify Hamilton County jobs, including underground work along Main Street. Lamkin is 12.0 miles northwest, Carlton is 15.5 miles north, Evant is 15.6 miles south, Cranfills Gap is 17.6 miles east and Gustine is 19.4 miles northwest. Gatesville is the nearest larger city, 28.5 miles southeast. From our Yukon yard, Hamilton is 314 road miles and a 6.3 hour drive, so distance is part of planning a job near Texas State Highway 36.

Places near Hamilton

What kinds of bores come up near Pecan Creek in Hamilton?

  • Highway crossing: A bore beneath Texas State Highway 22 stays below the paved travel lanes, with the route and cover set through the TxDOT permit.
  • Water service: A service route near the City of Hamilton system can use a bore under Coke Street to avoid opening the street surface.
  • Fiber conduit: A fiber route along Main Street can pass beneath pavement while pits remain in dirt beyond the bore entry and exit.
  • Creek crossing: A Pecan Creek crossing needs a planned depth below the channel and a check for U.S. Army Corps of Engineers jurisdiction.
  • Drainage crossing: Twomile Creek has 0.79 channel miles in Hamilton, so its channel and banks factor into the bore route.
  • Acreage service: A line toward Carlton can use a long bore where access and the Nuff soil profile suit the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near Gentry Street in Hamilton?

For a Hamilton quote, send the address or map pin, what is going in the ground, pipe or conduit size and footage; a sketch or plans help. Include the street, such as Gentry Street, so we can see whether the route meets pavement, a marked utility or a creek crossing. That detail helps us plan the work before setting the bore scope.

Nuff clay is the first cost factor to assess because it can cling to a reamer and grip the pipe, affecting fluid and reaming stages. The number of utilities to expose, pavement or concrete, and any creek crossing near Pecan Creek also change the work. Pipe size, bore length, pits and excavator time matter too. Mobilization reflects Hamilton’s 314 road miles from Yukon, and high profile or emergency work can add planning demands.

Questions people ask about boring in Hamilton

Does Trinity take directional boring jobs in Hamilton County, and who staffs them?

Yes. We take directional boring work in Hamilton County and serve Texas from our Yukon main office. Our own crews and satellite yards operated by partner drilling contractors we have vetted staff jobs around Hamilton, including routes near Rice Street. From the first call through the bore log, we coordinate each Pecan Creek crossing regardless of which crew is on site.

How do older homes and buried lines near Coke Street affect Hamilton replacement bores?

Hamilton’s housing stock has a median year built of 1961, according to the American Community Survey 2019 to 2023 five year estimates. A replacement route near Coke Street may need to work around existing lines rather than assume a clear path. We expose marked utilities before drilling near them and plan the bore around what is found.

Can groundwater or flood prone ground affect bore pits near Pecan Creek in Hamilton?

Flood prone soils cover 16% of Hamilton, including ground around Pecan Creek, so we plan pit locations and bore depth with that setting in mind. Seasonal water table is not mapped within 60 inches, but that does not remove the need to assess creek conditions at the specific route. Creek crossings are checked for federal jurisdiction during planning.

Does Nuff soil in Hamilton corrode steel, and what pipe can go in the bore?

The USDA soil survey maps high steel corrosion risk across 58% of Hamilton, and Nuff soil is the leading mapped soil series. The line owner chooses any coatings for steel casing or tracer wire. When planning a Twomile Creek crossing, we distinguish HDPE from steel because HDPE is not subject to that steel corrosion concern. The material choice depends on the line and the owner’s specifications.

What ground does a Hamilton bore pass through near Nuff soil?

The USDA soil survey maps Nuff soil across 34% of Hamilton and very stony silty clay loam on 33%. At about 40 inches, clay is mapped under about 40% of the area, while bedrock is mapped under 18%. These are mapped patterns rather than test borings, so the planned route can still need field checks.

Will a Hamilton bore encounter rock within the top five feet?

Bedrock is mapped within 60 inches across 18% of Hamilton, with 6% mapped as hard bedrock and 12% as weathered bedrock. The typical mapped depth is 17 inches. Paluxy Sand and Glen Rose Limestone, undivided, are named on the local geologic map, so a route may need rock drilling where the alignment meets harder material.

Does Trinity cover Lamkin and rural sites outside Hamilton?

Yes. We take work across Texas, including rural routes near Lamkin, which is 12.0 miles northwest of Hamilton. Our Yukon office is 314 road miles away, so mobilization is part of planning an outside city limits job. Share the location and route so we can assess access and the line crossing scope.

How much 811 notice is needed for a Hamilton bore along Rice Street?

The person arranging a bore along Rice Street needs to request utility locates through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. For Texas State Highway 22 work, we schedule around Texas811’s at least two working days notice before excavation. If the start slips more than 14 days past the notice, make a new request; worn or moved marks must be refreshed before work continues.

What affects the cost of a Hamilton bore near Texas State Highway 22?

The job scope sets the price, with Nuff clay, bore length and pipe size among the first details to assess. The number of utilities to expose, pavement near Texas State Highway 22, creek crossings and pit or excavator needs also affect the work. Mobilization reflects Hamilton’s 314 road miles from Yukon. No single route feature determines the price on its own.

Where the Hamilton facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Hamilton

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Hamilton, Texas

Type the address of your job in Hamilton. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Hamilton

Same county: Hico. All counties: Texas county list.