Hawk Cove Texas Directional Boring: Lufkin Soil, Axtell Loam and Texas State Highway 276
Quick Answer: Need a line beneath a road without cutting pavement? Along Amy Drive in Hawk Cove, we use directional boring, also called horizontal directional drilling (HDD), for water, sewer, gas, electric conduit or fiber routes. Texas State Highway 276 is 1.0 mile outside the city limits, and Hawk Cove is 253 road miles from our Yukon, Oklahoma main office. The USDA soil survey maps heavy clay across 94 percent of the area at 40 inches. That sticky ground calls for controlled fluid and staged reaming.
Hawk Cove bores at a glance
- Incorporated city in Hunt County, Texas. Population 511 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 253 miles, about 5.3 hours of driving.
- Ground: Lufkin soil is mapped on 52 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- No state or US highway is mapped inside the boundary. Closest: Texas State Highway 276.
- Railroad track inside the boundary: none mapped.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring along Amy Drive in Hawk Cove?
We take directional boring jobs in Hawk Cove, Hunt County, where the Census Bureau Vintage 2024 estimate puts the population at 511. On Amy Drive, Morris Drive and Evelyn Street, we can bore routes for water, sewer, gas, electric conduit and fiber without opening the full street surface. The route and line type help us choose the bore plan for the specific address.
Our main office is in Yukon, Oklahoma, and Hawk Cove work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have focused on directional boring since 1982. For Hawk Cove’s street and service runs, our equipment covers 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

How does Lufkin soil affect a bore in Hawk Cove?
The USDA soil survey maps the Lufkin Rader complex across 52 percent of Hawk Cove and Axtell loam across 43 percent. Nahatche loam, which is frequently flooded, accounts for 6 percent. At about 40 inches below the surface, the mapped texture is clay across 52 percent and clay loam across 48 percent. The survey maps heavy clay over 94 percent of the area at that depth, with average clay content of 39 percent. These are mapped soil patterns, not test borings, so a specific route still needs field checks.
| USDA soil survey, inside the Hawk Cove city limits | What is mapped |
|---|---|
| Soil series mapped | Lufkin 52 percent, Axtell 43 percent and Nahatche 6 percent |
| Texture at the surface | loam 100 percent |
| Texture about 40 inches down | clay 52 percent and clay loam 48 percent |
| Engineering class about 40 inches down | fat clay (CH) 94 percent and lean clay (CL) 6 percent |
| Average clay content about 40 inches down | 39 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 6 percent of the area |
| Flood prone soils | 6 percent of the area |
| High corrosion risk for uncoated steel | 48 percent of the area |
We plan in Hunt County with the fact that bedrock is not mapped in Hawk Cove’s top five feet, though deeper rock remains possible. The USDA soil survey maps a seasonal water table and flood prone soils across 6 percent of the area, so pits may need pumping where those conditions occur. High steel corrosion risk is mapped across 48 percent, a reason for the line owner to consider casing and tracer wire materials. The geologic map shows Pleistocene alluvial gravel, sand, silt and clay, with Mesozoic sedimentary rocks also mapped; changing material can affect steering and drilling pace.
How do we bore through clay in Hawk Cove while planning access along Morris Drive?
Hawk Cove’s mapped clay can cling to the reamer and grip pipe. We set the fluid mix and reaming pace for the route, then track the drill head as it advances along streets such as Amy Drive.
- In Hawk Cove’s heavy clay, we use a thinner drilling fluid with polymer and open the hole in stages to limit sticky buildup on the reamer.
- Because clay can grip pipe along Amy Drive, we plan the pullback for the same day the final reaming opens the bore.
- With heavy clay mapped across 94 percent of Hawk Cove at 40 inches, we watch fluid returns so pressure does not lift nearby pavement.
- We expose marked utilities on a Hawk Cove route with hydrovac before drilling near them, then track drill depth and pitch from the surface.

What is in the way of a new line near Texas State Highway 276 in Hawk Cove?
No state highway runs inside Hawk Cove’s limits. Texas State Highway 276 is 1.0 mile outside them, so a route that reaches its right of way needs a separate crossing plan. Inside the city, Amy Drive is the longest named street at 0.76 miles, followed by Morris Drive at 0.7 miles and Silvey Street at 0.55 miles. Evelyn Street runs 0.46 miles. Those street lengths help describe the local route, but the address and crossing points determine the actual bore layout.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 276 | Highway nearby | 1 miles outside | State highway office |
| Kitsee Inlt | Lake or pond | 3,366 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Waco Bay | Lake or pond | 2,719 acres, nearby | Checked for Corps of Engineers jurisdiction |
| Hawk Cove | Lake or pond | 94 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Hawk Cove or within 1 mile outside its limits, and no street and rail crossings are mapped in the city. No named streams are mapped inside or within 1 mile outside the limits, and no street crossings of named streams are mapped. The city has 0.04 miles of unnamed drainage. Nearby water features include Kitsee Inlt and Waco Bay, both outside the city limits; a route approaching a lake needs its own crossing review.
Who approves a bore in Hawk Cove and Hunt County?
Amy Drive and the other city streets in incorporated Hawk Cove belong to the city itself. Texas State Highway 276 is outside the limits, but work in its right of way needs a TxDOT utility permit. The TxDOT Paris District reviews that application. The utility that owns the line files through TxDOT’s online RULIS system, while we prepare the bore plan and profile and work under the permit issued to that utility owner. TxDOT requires boring or tunneling beneath existing highway pavement, with crossing cover and other details set through the permit. No railroad crossing is mapped near Hawk Cove.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What lines are already in the ground in Hunt County near Hawk Cove?
The water provider for the specific Hawk Cove address has to be confirmed with the city, the county or the local water district before a bore is planned. Electric utilities reporting service in Hunt County include Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative. Those county reports do not identify the provider at every Amy Drive address, so we confirm the line owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative | Electric utilities reporting service in Hunt County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Hawk Cove’s median housing year at 1985; we plan underground work near Northshore Road from site conditions. The estimates show 76 percent of homes built from 1960 to 1999 and 24 percent built in 2000 or later. A replacement route on Morris Drive may meet existing services, while a newer connection may need a different path. Before the drill approaches any marked utility, we use hydrovac potholing to expose it; paint shows position, not depth.

What is near Hawk Cove and Quinlan?
Hawk Cove is an incorporated city in Hunt County, at an elevation of 473 feet, with 0.37 square miles of land and ZIP code 75474. West Tawakoni is 3.0 miles east, and Quinlan is 3.3 miles northwest. East Tawakoni is 8.9 miles east. Greenville, the county seat, is 15.8 miles north, while Royse City is 14.8 miles northwest. From our Yukon yard, Hawk Cove is 253 road miles and a 5.3 hour drive, so that distance is part of planning a job on Amy Drive or near Texas State Highway 276.
Places near Hawk Cove
- Directional boring in West Tawakoni: 3 miles east
- Directional boring in Quinlan: 3.3 miles northwest
- Directional boring in East Tawakoni: 8.9 miles east
- Directional boring in Union Valley: 10.1 miles northwest
- Directional boring in Poetry: 10.7 miles west
- Directional boring in Royse City: 14.8 miles northwest
What boring work comes up near Amy Drive in Hawk Cove?
- Street service: A water or sewer service bore along Amy Drive can pass beneath pavement while pits stay in the dirt at each end.
- Highway crossing: A line approaching Texas State Highway 276 needs a route and bore plan suited to its TxDOT right of way.
- Fiber conduit: A fiber route along Morris Drive can use a bore to avoid cutting the local street surface.
- Electric conduit: On Evelyn Street, we confirm the line owner before planning a conduit bore because county electric reports do not identify every address.
- Drainage crossing: Where a route meets Hawk Cove’s mapped unnamed drainage, we plan the bore path around the channel and site conditions.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Hawk Cove quote near Evelyn Street?
A map pin matters on Evelyn Street because the exact point shows where the bore starts, what it must pass and how much room the equipment has. Please send us the address or pin near Texas State Highway 276, what is going in the ground, the pipe or conduit size, and the footage. A sketch or plans help us check the route and identify crossings near the property.
The 253 road miles from Yukon affect mobilization for a Hawk Cove job. The mapped Lufkin and Axtell soils matter because heavy clay can change fluid use and reaming. A route near Texas State Highway 276 may involve a TxDOT right of way permit. We also account for bore length, line size, utilities that need exposure, pavement or concrete, drainage crossings, pits, excavator time and sand backfill. High profile or emergency work can require a different plan.
Questions people ask about boring in Hawk Cove
Does Trinity Boring Solutions take jobs in Hawk Cove, Hunt County, and who staffs them?
Yes. We take directional boring work in Hawk Cove, Hunt County, and manage it from the first call through the bore log. Our own crews and partner drilling contractors we have personally vetted can staff the work. You deal with Trinity whichever crew is on site, including for a route on Amy Drive.
How old are buried lines near Morris Drive in Hawk Cove, and what does that mean for replacement bores?
The American Community Survey 2019 to 2023 estimates put the median housing year at 1985, with 76 percent of homes built from 1960 to 1999. A replacement bore near Morris Drive may cross existing services. We expose marked utilities before drilling close to them, since surface marks show position but not depth.
Does Lufkin soil in Hawk Cove corrode steel, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 48 percent of Hawk Cove. The line owner should weigh casing and tracer wire materials for a route through Lufkin soil. HDPE does not share the mapped steel corrosion concern, but the line owner selects materials for the installation.
What ground should I expect for a bore through Lufkin soil in Hawk Cove?
The USDA soil survey maps the Lufkin Rader complex across 52 percent of Hawk Cove. At about 40 inches down, the mapped material is clay across 52 percent and clay loam across 48 percent. Heavy clay can stick to a reamer, so staged reaming and controlled fluid help manage a bore near Amy Drive.
Will we encounter rock during directional boring in Hawk Cove near Waco Bay?
Bedrock is not mapped in Hawk Cove’s top five feet, but that does not rule out deeper rock. The geologic map shows Pleistocene alluvial gravel, sand, silt and clay, as well as Mesozoic sedimentary rocks. A route still needs to be assessed for changing ground conditions rather than treated as a test boring.
Who approves a bore under Texas State Highway 276 near Hawk Cove?
TxDOT reviews work in the Texas State Highway 276 right of way through its Paris District. The utility that owns the line files the permit application in TxDOT’s RULIS system, and we prepare the bore plan and profile for that filing. The highway is 1.0 mile outside Hawk Cove’s limits.
What bore sizes and lengths can Trinity handle near Evelyn Street in Hawk Cove?
For a project near Evelyn Street, our equipment range covers 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The suitable setup depends on the line, route and ground. Hawk Cove’s mapped heavy clay is one condition we consider when choosing a drilling approach.
How much notice does Texas811 need before a bore on Amy Drive in Hawk Cove?
For a planned bore along Amy Drive, request a Texas811 locate at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If a planned start near Pinewood Drive slips more than 14 days past the original notice, we make a new request. Before work continues near Dogwood Trail, we refresh worn or moved marks through Texas811.
What affects the cost of directional boring near Texas State Highway 276 in Hawk Cove?
The job details drive the price, not just the footage. A route near Texas State Highway 276 may involve right of way work, while Hawk Cove’s heavy clay can affect drilling and reaming. We also consider line size, length, utilities to expose, pavement or concrete, drainage crossings, pits and excavator time. The 253 road miles from Yukon affect mobilization.
Where the Hawk Cove facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Hawk Cove
- U.S. Census Bureau, TIGER/Line 2024: Hawk Cove boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Hawk Cove
- U.S. Census Bureau, American Community Survey 2019 to 2023: Hawk Cove housing units and year built
- Macrostrat geologic map compilation: map units under Hawk Cove
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Hunt County
- U.S. Geological Survey, Elevation Point Query Service: Hawk Cove elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Hawk Cove
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Hawk Cove
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Hawk Cove, Texas
Type the address of your job in Hawk Cove. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Hawk Cove
Same county: Greenville · Commerce · Caddo Mills · Wolfe City · Celeste · Lone Oak · Campbell · Neylandville. All counties: Texas county list.
