trinityboringsolutions.com

Quinlan Texas Directional Boring: Wilson Silt Loam, FM 35 And Bois D Arc Creek

Quick Answer: Wilson soil can hold a bore open, but its heavy clay can cling to the reamer as we install a line beneath FM 35. Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Quinlan, Texas, including routes near Main Street. Quinlan is 249 road miles from our Yukon, Oklahoma main office, and Bois D Arc Creek sits 0.3 miles beyond the city limits. At about 40 inches, the mapped ground is clay, so sticky cuttings call for controlled fluid and staged reaming.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Quinlan bores at a glance

  • Incorporated city in Hunt County, Texas. Population 1,561 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 249 miles, about 5.1 hours of driving.
  • Ground: Wilson soil is mapped on 40 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 40 percent of the area.
  • Highways inside the boundary: FM 35, Texas State Highway 276, Texas State Highway 34 and FM 751. State permit office: TxDOT Paris District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Quinlan, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near FM 35 in Quinlan?

We take directional boring work in Quinlan, in Hunt County, where the Census Bureau Vintage 2024 estimate puts the population at 1,561. Along FM 35, Main Street or a residential route, our crews can install water, sewer, gas, electric conduit and fiber. The line type and its route determine the bore plan, especially where existing streets or buried services shape the path.

Our main office is in Yukon, Oklahoma, and Quinlan work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have bored since 1982, giving us four decades of experience with ground like the heavy clay mapped around Quinlan. That matters when Wilson soil sticks to tooling or grips pipe during a pull.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What do Wilson soils mean for boring in Quinlan?

The USDA soil survey maps Wilson soil across 40 percent of Quinlan and Crockett loam across 35 percent. Lufkin Rader complex accounts for 14 percent, with Leson clay also mapped. Surface texture is mostly loam and silt loam, but the profile changes with depth. At about 40 inches, clay is mapped under 99 percent of the area, with an average clay content of 46 percent. The survey classifies that material as CH. These are mapped patterns, not test borings, so a site investigation may show different conditions along a specific bore route.

USDA soil survey, inside the Quinlan city limitsWhat is mapped
Soil series mappedWilson 40 percent, Crockett 35 percent, Lufkin 14 percent, Ferris 5 percent and Leson 5 percent
Texture at the surfaceloam 50 percent, silt loam 40 percent and clay 10 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down46 percent
Bedrock mapped within 60 inches40 percent of the area (0 percent hard rock, 40 percent weathered rock)
Seasonal water table within 60 inches40 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel86 percent of the area

Weathered bedrock is mapped within 60 inches across 40 percent of Quinlan; hard bedrock is not mapped at that depth. Seasonal water table conditions are mapped within 60 inches in 40 percent of the area, so pits may need pumping. Flood prone soils are not mapped in Quinlan, so we check Wilson and Crockett soil series when planning underground routes. High steel corrosion risk covers 86 percent, a reason for the line owner to review casing and tracer wire materials. The geologic map includes Silty Clay Decomposition Residuum of Cenozoic age and Kemp clay and Corsicana Marl, undivided, of Maastrichtian age. Weathered material may slow a bore.

How do we bore through clay near Main Street in Quinlan?

The USDA survey maps clay under about 40 inches across nearly all of Quinlan. That heavy material can stick to the reamer and grip pipe, so we manage fluid, reaming and the pull around each route.

  1. Wilson and Crockett soils cover much of Quinlan, while clay dominates near 40 inches. We use thinner fluid and staged reaming to limit sticky buildup.
  2. Heavy clay can hold pressure beneath pavement on FM 35. We watch fluid returns and keep pressure controlled to reduce the chance of lifting the surface.
  3. Seasonal water table conditions are mapped in parts of Quinlan. For pits near Main Street, we plan compact work areas and pump water if the ground fills them.
  4. Before a bore near 5th Street, we expose marked utilities with hydrovac. A walkover locator tracks the drill head while we record depth and pitch.
Rod box on the Vermeer D24x40 S3 Navigator with the bore path heading toward the trees on a rock bore in Guthrie, OK
Rod box on our Vermeer D24x40 with the bore path heading toward the trees on a rock bore in Guthrie, Oklahoma.

What might a bore cross near Bois D Arc Creek in Quinlan?

FM 35 and Texas State Highway 276 each run 3.1 mapped roadway miles inside Quinlan. Texas State Highway 34 adds 1.5 miles, while FM 751 has 0.1 mile mapped in the city. Main Street is the longest named street at 1.39 miles, followed by Quinlan Parkway at 1.26 miles and 2nd Street at 0.79 miles. A route under one of these roads needs a profile that accounts for pavement and the lines nearby. Boring can keep the surface intact where an open cut would disrupt a street.

CrossingTypeMapped extentWho has a say
FM 35State highway3.1 roadway miles insideState highway office
Texas State Highway 276State highway3.1 roadway miles insideState highway office
Texas State Highway 34State highway1.5 roadway miles insideState highway office
FM 751State highway0.1 roadway miles insideState highway office
Bois D Arc CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Jones CreekStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Quinlan or within one mile of its limits, and no street and rail crossing is mapped in the city. No named stream runs inside the limits either. Bois D Arc Creek is 0.3 miles away and Jones Creek is 0.9 miles away; neither has a mapped street crossing inside Quinlan. No lakes or ponds are mapped within one mile, so we plan Quinlan crossings around roads such as FM 751. A proposed creek route still needs site review, since the channel and its banks can affect bore depth and planning.

Do I need a permit for a bore in Hunt County in Quinlan?

Quinlan is an incorporated city, so its city streets belong to the city; we do not assume a city department, form or fee. For work in the right of way on FM 35, Texas State Highway 276, Texas State Highway 34 or FM 751, the line owner files the utility permit in TxDOT’s RULIS system. TxDOT’s Paris District reviews it. We give the owner the bore plan and profile and work under the permit issued to that owner. Cover requirements depend on the line: electric and communications need 60 inches at a highway crossing and 48 inches along the right of way; water needs 60 inches at a crossing and 36 inches along it; pressurized sewer needs 60 inches at crossings. On FM 35 in Quinlan, TxDOT requires boring or tunneling beneath existing highway pavement, so we plan the crossing below the road. A Bois D Arc Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are near the City of Quinlan water system?

The City of Quinlan public water system uses purchased surface water. Records list 784 service connections and a population served of 1,414, useful context when planning a water line near Main Street. Electric service reported in Hunt County includes Oncor Electric Delivery Company, Texas New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric Cooperative. We confirm the line owner for the specific Quinlan address before planning an electric conduit bore.

Line ownerWhat it isSourceSize
City of QuinlanPublic water systemSurface water bought from another system784 connections, 1,414 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Greenville, Fannin County Electric Cooperative, Farmers Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Hunt CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Quinlan’s median housing year at 1983, informing how we frame underground work in the city. It estimates 12 percent of homes were built before 1960, 66 percent from 1960 to 1999 and 22 percent in 2000 or later. That mix can mean a route along 5th Street encounters older lines as well as newer service connections. We hydrovac pothole marked utilities on the bore path before drilling near them; paint shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Quinlan from Royse City and our Yukon office?

Quinlan is an incorporated city in Hunt County, at an elevation of 520 feet and covering 1.29 square miles. ZIP code 75474 serves Quinlan in Hunt County, helping us verify the service area when preparing underground project details. Hawk Cove is 3.3 miles southeast, West Tawakoni is 5.6 miles east, Union Valley is 6.8 miles northwest, Poetry is 8.9 miles southwest and East Tawakoni is 11.5 miles east. Royse City, the nearest larger city, is 11.6 miles northwest; Greenville, the county seat, is 14.1 miles north. The Yukon yard is 249 road miles away, a 5.1 hour drive, so distance affects mobilization for a Quinlan job.

Places near Quinlan

What boring work comes up near Main Street in Quinlan?

  • Highway crossing: A bore beneath FM 35 can keep the road surface intact while the line passes below the state highway.
  • Water service: A connection near the City of Quinlan water system needs a route that accounts for existing lines along Main Street.
  • Fiber conduit: A run beside Quinlan Parkway can avoid an open cut through the street and its adjoining pavement.
  • Creek crossing: A proposed route near Bois D Arc Creek needs depth planning for the channel and review for federal jurisdiction.
  • Residential service: A line near 5th Street may need hydrovac potholing to establish the depth of marked utilities before drilling.
  • State road utility: Work along Texas State Highway 276 needs a bore plan suited to the right of way and the line owner’s permit.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near 5th Street in Quinlan?

A map pin matters near 5th Street because the exact route can change how a bore meets nearby services or pavement. Send us the address or pin, the nearest street such as Panther Path, what will go underground, the pipe or conduit size, and the footage. A sketch or plans help us see the route, entry and exit pits, and any crossing near FM 35 or Bois D Arc Creek.

The job sets the price through its length, pipe or conduit size, soil, crossings and logistics. Quinlan’s heavy clay can affect reaming and pipe pull. A route beneath FM 35 may need highway permit planning and cover depth review, while a Bois D Arc Creek crossing adds channel planning. Pavement, exposed utilities, pit work, sand backfill and excavator time also shape the scope. Mobilization matters because Quinlan is 249 road miles from Yukon.

Questions people ask about boring in Quinlan

Does Trinity take directional boring jobs in Quinlan and Hunt County?

Yes. We take Quinlan work with our own crews and vetted partner contractor yards supporting the job. For Quinlan work, 249 road miles from Yukon main office, we keep one point of contact from first call through the bore log, regardless of crew. For a route near FM 35, the address and line type help us plan the work.

What ground does a bore pass through in Quinlan’s Wilson soil?

The USDA soil survey maps Wilson soil across 40 percent of Quinlan and clay under 99 percent of the area at about 40 inches. That clay averages 46 percent clay content and is classified CH. It can stick to the reamer, so staged reaming and controlled fluid help on a route near Main Street.

Is there rock near the surface on a Quinlan bore route?

Weathered bedrock is mapped within 60 inches across 40 percent of Quinlan, while hard bedrock is not mapped at that depth. That does not rule out rock farther down. A route near Bois D Arc Creek or FM 35 still needs site specific planning for the material the drill encounters.

Who approves a Quinlan bore beneath FM 35?

For work in the FM 35 right of way, the line owner submits the utility permit through TxDOT’s RULIS system, and the TxDOT Paris District reviews it. We prepare the bore plan and profile for that owner and work under its permit. Highway cover depends on the line being installed.

Can a line be bored beneath Bois D Arc Creek near Quinlan?

A bore may be planned beneath Bois D Arc Creek, which is 0.3 miles from Quinlan’s city limits. The route needs channel depth planning, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The creek is outside the city, so the actual site and route matter.

Who runs Quinlan’s public water system, and what is its source?

The City of Quinlan owns its public water system and uses purchased surface water, while we assess Jones Creek separately for any nearby bore. Records list 784 service connections and 1,414 people served. Those figures help frame a proposed water line, but the provider and existing line locations for a particular address near 5th Street should be confirmed.

Does Quinlan’s distance from Royse City affect a boring job?

Quinlan is 11.6 miles southeast of Royse City and 249 road miles from our Yukon, Oklahoma main office. The longer trip can affect mobilization for work near FM 35. We handle Texas work with our crews and vetted partner contractor yards, while Trinity remains your contact through the bore log.

How much notice does Texas811 need for a Quinlan bore near Main Street?

For a bore near Main Street, request a locate through Texas811 at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays. Do not request it earlier than 14 days before the start. If the start moves more than 14 days past the original notice, submit a new request; worn or moved marks must be refreshed before work continues.

What affects the cost of directional boring in Quinlan near FM 35?

The route, length, pipe or conduit size, ground, crossings and access determine the scope. Quinlan’s heavy clay affects drilling, and FM 35 can bring right of way planning. A Bois D Arc Creek crossing, pavement, exposed utilities, pit work and the 249 road miles from Yukon can also affect the job.

Where the Quinlan facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Quinlan

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Quinlan, Texas

Type the address of your job in Quinlan. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Quinlan

Same county: Greenville · Commerce · Caddo Mills · Wolfe City · Celeste · Lone Oak · Campbell · Neylandville. All counties: Texas county list.