trinityboringsolutions.com

Ingram Texas Directional Boring: Kerrville Soil, Johnson Creek And Texas State Highway 27

Quick Answer: Kerrville gravelly clay loam can be sticky around a reamer. We do directional boring, also called horizontal directional drilling (HDD), in Ingram, Texas, including routes near Johnson Creek. Ingram is 484 road miles from our Yukon, Oklahoma main office, with Texas State Highway 27 nearby. The USDA soil survey maps bedrock within 40 inches across 50% of the city, so a route may call for slower rock drilling. We plan for the ground along each bore path.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Ingram bores at a glance

  • Incorporated city in Kerr County, Texas. Population 1,849 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 484 miles, about 9.5 hours of driving.
  • Ground: Kerrville soil is mapped on 37 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 50 percent of the area.
  • Highways inside the boundary: Texas State Highway 27 and Texas State Highway 39. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Johnson Creek and Nichols Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Johnson Creek in Ingram?

Kerr County is home to Ingram, where the Census Bureau Vintage 2024 estimate puts the population at 1,849. We take directional boring work here, including water, sewer, gas, electric conduit and fiber routes along streets such as Josephine Street and near Johnson Creek. The line type and route determine the bore plan, so we review both before choosing equipment.

Our main office is in Yukon, Oklahoma, and Ingram work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have drilled directionally since 1982. For a route near Johnson Creek, our equipment range covers 3/4 inch service lines through 48 inch casing and bore lengths from 10 feet to 5,000 feet.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

How does Ingram soil near Kerrville affect a bore?

The USDA soil survey maps Kerrville soil across 37% of Ingram, with gravelly clay loam among the mapped surface textures. At about 40 inches below the surface, bedrock is mapped across 50% of the area, clay across 20%, and extremely gravelly loamy sand across 12%. Average clay content at that depth is 31%. These are mapped soil patterns, not test borings at a particular address. Clay can hold an open hole and stick to the reamer, while gravelly ground can cave behind the bit.

USDA soil survey, inside the Ingram city limitsWhat is mapped
Soil series mappedKerrville 37 percent, Nuvalde 20 percent, Orif 12 percent, Krum 8 percent and Tarpley 7 percent
Texture at the surfacegravelly clay loam 37 percent, silty clay 33 percent and gravelly sandy loam 12 percent
Texture about 40 inches downbedrock 50 percent, clay 20 percent and extremely gravelly loamy sand 12 percent
Engineering class about 40 inches downlean clay (CL) 28 percent, clean gravel (GP) 12 percent and fat clay (CH) 9 percent
Average clay content about 40 inches down31 percent
Bedrock mapped within 60 inches50 percent of the area (45 percent hard rock, 4 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils19 percent of the area
High corrosion risk for uncoated steel43 percent of the area

The USDA soil survey maps hard bedrock within 60 inches across 45% of Ingram, with typical bedrock depth at 22 inches. That makes the soil to rock contact a steering concern; mapped Glen Rose Limestone is Albian in age, and cherty calcareous clay solution residuum is also present. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 19% of the area, a concern near Johnson Creek. High steel corrosion risk is mapped across 43%, so the line owner should consider casing and tracer wire materials.

How do we drill Ingram ground with bedrock?

Kerrville gravelly clay loam and shallow mapped bedrock call for a route specific plan in Ingram. We choose the bit and reaming sequence for the material shown along the planned bore, not just the surface soil.

  1. Kerrville gravelly clay loam can ball on a reamer, so we use a staged ream and plan to pull pipe soon after opening the hole.
  2. With bedrock mapped within 40 inches across half of Ingram, we select rock capable tooling where the route meets limestone or chert.
  3. Before drilling near a marked line, we hydrovac pothole it; paint on College Street shows position, not burial depth.
  4. We track the drill head from the surface and log depth and pitch, with Johnson Creek and its banks shaping the crossing profile.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What might a bore cross near Johnson Creek in Ingram?

Texas State Highway 27 has 2.0 mapped roadway miles inside Ingram, and Texas State Highway 39 has 1.3. The longest named streets include Josephine Street at 0.9 miles, College Street at 0.78 miles and Main Street at 0.75 miles. A route under a highway pavement calls for boring or tunneling rather than an open cut. Street length and pavement affect where entry and exit pits can sit, so the route and work area need to be planned together.

CrossingTypeMapped extentWho has a say
Texas State Highway 27State highway2 roadway miles insideState highway office
Texas State Highway 39State highway1.3 roadway miles insideState highway office
Johnson CreekStream0.99 channel miles insideChecked for Corps of Engineers jurisdiction
Nichols CreekStream0.08 channel miles insideChecked for Corps of Engineers jurisdiction
Guadalupe RiverStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Indian CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Brushy BranchStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Brushy CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
New Lake IngramLake or pond32 acres, nearbyChecked for Corps of Engineers jurisdiction
Old Ingram LakeLake or pond5 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Ingram or within 1 mile outside its limits, so no mapped rail crossing appears in the city. Johnson Creek runs 0.99 channel miles inside the city, and Nichols Creek runs 0.08; three mapped street crossings of named streams are present. New Lake Ingram and Old Ingram Lake are both within 1 mile but outside city limits. A crossing of Johnson Creek or a lake is checked for federal jurisdiction during planning.

Do I need approval to bore under Texas State Highway 27 in Ingram?

For a bore under Texas State Highway 27, the line owner, not our drilling crew, files the utility application in TxDOT’s online RULIS system. We give the owner the bore plan and profile, then work under the permit issued to it; the TxDOT San Antonio District reviews the application. At a highway crossing, electric and communication lines need 60 inches of cover below the lowest crossed grade, and water lines need 60 inches; pressurized sewer lines also need 60 inches. Along the right of way, electric and communication lines need 48 inches and water lines 36 inches. The permit can set another depth. Ingram city streets belong to the city, and a Johnson Creek crossing is checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Kerr County near Ingram?

The water provider for an Ingram address must be confirmed with the city, Kerr County or the local water district before a bore is planned; the provider could not be matched to the city. Kerrville Public Utility Board, Bandera Electric Cooperative, Central Texas Electric Cooperative and Pedernales Electric Cooperative report electric service in Kerr County. Those records do not identify the provider at every Josephine Street address, so we confirm the line owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Kerrville Public Utility Board, Bandera Electric Cooperative, Central Texas Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Kerr CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Ingram’s median housing year at 1976; 20% of homes were built before 1960, 61% from 1960 to 1999 and 19% in 2000 or later. That mix can mean a bore replaces older service or connects newer construction. On College Street, we hydrovac pothole each marked utility on the planned path before drilling near it, since surface marks show position rather than depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Where does Trinity take boring work around Ingram and Harper?

Ingram is in Kerr County at an elevation of 1,726 feet and covers 1.47 square miles. ZIP code 78025 serves the city. Kerrville is 6.9 miles southeast and is both the nearest larger city and the county seat; Harper is 13.2 miles north, and Center Point is 15.0 miles southeast. Comfort lies 21.2 miles east, and Fredericksburg is 25.2 miles northeast. From our Yukon yard, Ingram is 484 road miles away, about a 9.5 hour drive, which affects mobilization for work near Texas State Highway 27.

Places near Ingram

What would we bore near Main Street in Ingram?

  • Highway crossing: A bore under Texas State Highway 27 uses an alignment and pits that keep existing pavement uncut.
  • Water service: A service route near Main Street needs the address specific water provider confirmed before the bore is planned.
  • Fiber drop: A fiber route along College Street can avoid an open cut across pavement and sidewalks.
  • Creek crossing: A Johnson Creek bore needs a planned path below the channel and a jurisdiction check during planning.
  • Utility exposure: Before drilling near a marked line, we hydrovac pothole it; that applies to a proposed route beneath Josephine Street.
  • Lake area line: New Lake Ingram is outside the city limits, so a nearby route needs its own access and ground review.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near Josephine Street in Ingram?

For a quote near Josephine Street, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help. The route near Johnson Creek matters too. It shows us whether creek or drainage exposure, pavement, or a tight place for pits will change the work plan.

In Ingram, ground conditions are the first pricing concern: Kerrville gravelly clay loam can cling to a reamer, and shallow mapped bedrock can call for slower drilling. The number of utilities to expose, pavement on Main Street, and any Johnson Creek crossing also affect the scope. Pipe size, bore length, pits, backfill and excavator time matter as well. Mobilization reflects the 484 road miles from Yukon, while high profile or emergency work can add planning demands.

Questions people ask about boring in Ingram

Does Trinity Boring Solutions take jobs in Kerr County near Ingram, and who staffs them?

Yes. We take directional boring work in Ingram and across Texas. Our own crews and partner drilling contractors Trinity has vetted handle the work, with Trinity as your contact from the first call through the bore log. For a route near Johnson Creek, the crew assignment follows the project plan.

Who approves a bore under Texas State Highway 27 in Ingram?

The line owner applies for the TxDOT utility permit, and the TxDOT San Antonio District reviews it. We prepare the bore plan and profile for the owner’s application and work under its permit. A Texas State Highway 27 crossing also has to meet the cover depth in the permit.

Can a new line be bored under Johnson Creek in Ingram?

A bore can be planned under Johnson Creek, subject to the route and site conditions. The creek runs 0.99 channel miles inside Ingram, and stream crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning. We plan the path and pits around the channel and banks.

Who owns electric lines in Kerr County near Ingram, and who confirms conduit specs?

Kerrville Public Utility Board, Bandera Electric Cooperative, Central Texas Electric Cooperative and Pedernales Electric Cooperative report service in Kerr County. That does not establish which company serves a particular Ingram address. We confirm the line owner for the route before planning a conduit bore, and the owner confirms its conduit specifications.

Who is in charge of Main Street in Ingram, and does it need to be cut?

Ingram is incorporated, so Main Street is a city street. Directional boring can place a line beneath the roadway without cutting its pavement, subject to the route and site plan. The street’s 0.75 mapped miles in the city give us a named route to review, not a required bore length.

What do Ingram homes near College Street tell us about replacement bores?

Ingram’s median housing year is 1976, according to the American Community Survey 2019 to 2023 five year estimates. Older housing may mean a replacement service, while later construction may need a new connection. A bore near College Street still requires locating and exposing marked utilities before drilling near them.

Does Trinity cover Kerrville soil areas and rural sites outside Ingram?

Yes. We take work in nearby Kerrville and at rural sites outside Ingram city limits. Kerrville is 6.9 miles southeast, and its namesake Kerrville soil is mapped across 37% of Ingram. The actual route and access determine the drilling plan, including for work outside the city.

How much notice does Texas811 need for a bore near Josephine Street in Ingram?

Submit a Texas811 locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before the start. If work moves more than 14 days past the original notice, request a new ticket. Refresh worn or moved marks through Texas811 before work resumes near Josephine Street.

What affects the cost of a directional bore under Texas State Highway 27 in Ingram?

The price depends on the job details, not a standard rate. Kerrville gravelly clay loam and mapped bedrock affect drilling time; the Texas State Highway 27 crossing, utilities to expose, pavement, pits, pipe size and footage also shape the scope. Mobilization from Yukon matters for Ingram, which is 484 road miles from the main office.

Where the Ingram facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Ingram

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Ingram, Texas

Type the address of your job in Ingram. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Ingram

All counties: Texas county list.