trinityboringsolutions.com

Harper Texas Directional Boring: Purves Clay, US 290 and Pedernales River

Quick Answer: At Harper, we take directional boring, also called horizontal directional drilling (HDD), for routes beneath US 290 and the community’s roads. Harper is 481 road miles from our Yukon, Oklahoma main office, and Wendel Road’s 9.5 miles inside the mapped community make route length a planning detail. USDA maps show Purves soils across 43 percent of Harper; clay can cling to a reamer, so staged reaming and fluid control matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Harper bores at a glance

  • Unincorporated community in Gillespie County, Texas. Population 1,332 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 481 miles, about 9.5 hours of driving.
  • Ground: Purves soil is mapped on 43 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 93 percent of the area.
  • Highways inside the boundary: US 290, RM 783 and FM 2093. State permit office: TxDOT Austin District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Pedernales River, Klein Branch, Banta Branch and Stevens Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near US 290 in Harper?

The Census Bureau counted 1,332 people in Harper in the 2020 Census. We install water, sewer, gas, electric conduit and fiber, including routes beneath US 290 or along Wendel Road. As an unincorporated community in Gillespie County, Harper has no city government, so road and permit responsibilities rest with the county or state.

Our main office is in Yukon, Oklahoma, and Harper work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have done directional boring since 1982. For a route along Wendel Road or beneath US 290, our equipment handles 3/4 inch service lines through 48 inch casing and bores from 10 feet to 5,000 feet.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Purves soil in Harper?

The USDA soil survey maps Purves soils across 43 percent of Harper and Tarrant soils across 31 percent. Surface textures are clay across 52 percent and very cobbly clay across 31 percent. At about 40 inches below the surface, bedrock is the mapped texture across 91 percent of the area; the average clay content at that depth is 27 percent. With clay as Harper’s surface soil texture, we plan for no mapped sandy area at that depth during a bore. These are soil survey patterns, not test borings, so a planned route near Kramer Road still needs site specific evaluation.

USDA soil survey, inside the Harper mapped community boundaryWhat is mapped
Soil series mappedPurves 43 percent, Tarrant 31 percent, Tarpley 7 percent, Doss 7 percent and Boerne 4 percent
Texture at the surfaceclay 52 percent, very cobbly clay 31 percent and silty clay 8 percent
Texture about 40 inches downbedrock 91 percent, loam 4 percent and silty clay loam 3 percent
Engineering class about 40 inches downlean clay (CL) 8 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inches93 percent of the area (83 percent hard rock, 10 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils6 percent of the area
High corrosion risk for uncoated steel93 percent of the area

Bedrock is mapped within 60 inches across 93 percent of Harper, including hard bedrock across 83 percent and weathered bedrock across 10 percent. The USDA map lists Edwards Limestone of Albian age, so a bore may move from clay into hard rock and need rock tooling. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 6 percent. High steel corrosion risk is mapped across 93 percent, a concern for uncoated casing or tracer wire near Wendel Road; the line owner selects materials.

How do crews handle bedrock in Harper?

Purves clay and mapped Edwards Limestone can make one Harper bore shift from sticky soil to hard rock. We plan the tooling and fluid around the route, then track the drill head as it advances near local roads and utilities.

  1. Purves soils have clay at the surface, so we manage fluid and ream in stages to limit sticky cuttings and avoid leaving an open hole longer than needed.
  2. With bedrock mapped within 60 inches across 93 percent of Harper, we check the route for rock and select tooling suited to the ground near US 290.
  3. Before drilling near a marked line on Wendel Road, we hydrovac pothole to expose it; paint shows position, not depth.
  4. We track the drill head from the surface and log depth and pitch as a bore passes near the Pedernales River or a mapped street crossing.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What might a bore cross near the Pedernales River in Harper?

US 290, RM 783 and FM 2093 run inside Harper, with mapped roadway lengths of 6.9 miles, 10.1 miles and 5.7 miles respectively. Wendel Road is the longest named street at 9.5 miles, followed by Fiedler Road at 6.04 miles and Lange Road at 5.79 miles. A route under one of these roads needs a plan for its right of way and pavement. Existing highway pavement is bored or tunneled rather than cut open.

CrossingTypeMapped extentWho has a say
US 290US highway6.9 roadway miles insideState highway office
RM 783State highway10.1 roadway miles insideState highway office
FM 2093State highway5.7 roadway miles insideState highway office
Pedernales RiverStream9.52 channel miles insideChecked for Corps of Engineers jurisdiction
Klein BranchStream7.95 channel miles insideChecked for Corps of Engineers jurisdiction
Banta BranchStream5.25 channel miles insideChecked for Corps of Engineers jurisdiction
Stevens CreekStream4.28 channel miles insideChecked for Corps of Engineers jurisdiction
Falls ProngStream3.42 channel miles insideChecked for Corps of Engineers jurisdiction
Pecan CreekStream2.46 channel miles insideChecked for Corps of Engineers jurisdiction
Indian CreekStream2.29 channel miles insideChecked for Corps of Engineers jurisdiction
Rogers CreekStream2.24 channel miles insideChecked for Corps of Engineers jurisdiction
Nott BranchStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Threadgill CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Brushy BranchStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Harper or within one mile outside the community, and no street and rail crossing is mapped. The Pedernales River runs 9.52 channel miles inside Harper; Klein Branch runs 7.95 miles, and Banta Branch runs 5.25 miles. Public records map 32 street crossings of named streams, so a route near one needs careful alignment. For boring near the Pedernales River, we plan around the stream setting; no lakes or ponds are mapped within one mile.

Who approves a bore on roads in Gillespie County in Harper?

Harper is an unincorporated community, so its streets do not belong to a city government; county or state authority depends on the road. For a bore in the US 290, RM 783 or FM 2093 right of way, electric and communication lines need at least 60 inches of cover below the lowest crossed grade, and 48 inches along the right of way. Water lines need 60 inches at crossings and 36 inches along it; pressurized sewer needs 60 inches at crossings. TxDOT’s Austin District reviews the permit. The line owner files in RULIS, and we prepare the bore plan and profile for that filing. Any river or creek route, including the Pedernales River, is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities should we check in Gillespie County in Harper?

EPA drinking water records do not match a provider to Harper, and no system carries the community’s name. Confirm the water provider for the specific address with the county or local water district before planning a bore near Wendel Road. AEP Texas North, Central Texas Electric Cooperative and Pedernales Electric Cooperative report electric service in Gillespie County, but the line owner must be confirmed for the address. We can hydrovac expose marked water and electric lines before drilling near them.

Line ownerWhat it isSourceSize
AEP Texas North, Central Texas Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Gillespie CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Harper’s median housing year is 1990; for underground planning along US 290, we treat it as area housing context. Harper’s housing estimates in Gillespie County put 17 percent before 1960, 54 percent from 1960 to 1999, and 29 percent in 2000 or later; we use these figures as planning context. That mix can mean replacement work as well as new services along roads such as Lange Road. Before the drill approaches a marked utility, we pothole to check its depth; surface paint alone does not show how deep it lies.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Harper and nearby Ingram?

Harper is an unincorporated community in Gillespie County at an elevation of 2,182 feet, covering 56.57 square miles. ZIP code 78631 serves the area. Ingram is 13.2 miles south, Kerrville is 17.9 miles southeast, and Fredericksburg, the county seat, is 23.7 miles east. Kerrville is the nearest larger city. From our Yukon yard, Harper is 481 road miles away and about a 9.5 hour drive, so distance is part of planning work near US 290.

Places near Harper

Which jobs call for a bore along Wendel Road in Harper?

  • Highway crossing: A bore beneath US 290 can carry water or electric conduit without cutting the existing pavement.
  • Water service: A line along Wendel Road needs its provider confirmed for the address before we plan the route.
  • Fiber route: Conduit along Lange Road can connect a service while the bore avoids open cuts across the road.
  • Creek crossing: A route under the Pedernales River needs a profile that accounts for the channel and a jurisdiction check during planning.
  • Electric conduit: Near Kramer Road, we expose marked utilities before drilling close to the line owner’s route.
  • Acreage service: A long bore near Fiedler Road can carry water, sewer or conduit between separated service points.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Harper quote near Kramer Road?

For work near Kramer Road, start with the address or a map pin, then tell us what goes underground. Give the pipe or conduit size and the footage, such as a service route crossing US 290. A sketch or plans help us see the route, nearby utilities and any creek crossing before we scope the bore.

A bore near Kramer Road is simpler to plan when the route is clear, access is open and no pavement, utility or creek crossing complicates it. Price changes with length, pipe size, soil and rock, exposed utilities, pavement, drainage crossings, pits, excavator time and backfill. Harper’s Purves clay and limestone can affect drilling, while a US 290 crossing adds highway requirements. At 481 road miles from Yukon, mobilization also matters.

Questions people ask about boring in Harper

Does Trinity take directional boring jobs in Harper, Gillespie County, and who staffs them?

Yes. We take directional boring work in Harper, Gillespie County, with our own crews and partner contractor crews operating from satellite yards. For RM 783 planning, we coordinate with Trinity through the bore log, whichever crew is on site. For a route near US 290, we plan the crew and equipment around the ground and the line being installed.

What ground should I expect for a Harper bore in Purves soil?

The USDA soil survey maps Purves soils across 43 percent of Harper, with clay and very cobbly clay common at the surface. At about 40 inches down, bedrock is the mapped texture across 91 percent of the area. Those are mapped patterns, not test borings, so the route near Lange Road still needs site specific planning.

Is there rock on a Harper bore route, and how much bedrock is mapped?

Rock is widely mapped in Harper: bedrock is mapped within 60 inches across 93 percent of the area. Hard bedrock covers 83 percent and weathered bedrock 10 percent. The Edwards Limestone map unit is another reason to check the route before choosing tooling near US 290.

Who approves a Harper bore under US 290, and which state office reviews it?

TxDOT reviews a US 290 right of way utility permit through its Austin District. The utility owner submits the application in RULIS, while we provide the bore plan and profile and work under the owner’s permit. The permitted depth can depend on the line type and crossing conditions.

Can a utility line be bored under the Pedernales River in Harper?

A bore under the Pedernales River can be considered after the route is planned and the crossing is checked for U.S. Army Corps of Engineers jurisdiction. The river runs 9.52 channel miles inside Harper. Its banks and channel affect alignment and depth, so the planned profile needs to fit that specific crossing.

Which electric companies report service in Gillespie County for a Harper conduit bore?

AEP Texas North, Central Texas Electric Cooperative and Pedernales Electric Cooperative report electric service in Gillespie County. That does not identify the owner at every Harper address, so confirm the line owner and conduit specifications for the specific route before planning a bore near Wendel Road.

Can I reach Trinity after hours about an urgent bore near Lange Road in Harper?

Yes. Call (405) 409-7423; a person answers 24 hours a day. If the urgent work is near Lange Road, tell us the location and what line needs to go in so we can discuss the job scope and response needs.

How much 811 notice is needed before a Harper bore on Wendel Road?

For a bore on Wendel Road, Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If a Harper start slips more than 14 days past the original notice, we make a new request through the TxDOT Austin District. Before resuming a crossing on Wendel Road, we refresh any marks that wear off or move through Texas811.

What affects the price of a Harper directional bore under US 290?

The route and scope determine the price, not the highway name alone. Length, pipe or conduit size, Purves clay or limestone, utilities to expose, pavement, creek crossings, pits and equipment time all matter. A US 290 right of way crossing adds permit planning, and Harper’s distance from Yukon affects mobilization.

Where the Harper facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Harper

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Harper, Texas

Type the address of your job in Harper. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Harper

Same county: Stonewall. All counties: Texas county list.