Lancaster Texas Directional Boring: Houston Black Clay, BNSF Railway and Ten Mile Creek
Quick Answer: Can we get your line beneath Pleasant Run Road, a BNSF Railway track or Ten Mile Creek without cutting across it? Yes, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Lancaster and across Texas. Lancaster is 235 road miles from our Yukon, Oklahoma main office, with Interstate 35 running through town. Houston Black soil and the mapped heavy clay can grip pipe, so we plan the reaming and pull around it.
Lancaster bores at a glance
- Incorporated city in Dallas County, Texas. Population 40,780 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 235 miles, about 4.7 hours of driving.
- Ground: Houston Black soil is mapped on 38 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 44 percent of the area.
- Highways inside the boundary: Interstate 35, Interstate 20, US 77 and Texas State Highway 342. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: BNSF Railway, with 12 mapped street and rail crossings.
- Named streams inside the boundary: Ten Mile Creek, Mill Creek, Deep Branch and Keller Creek.
- Public water: City of Lancaster, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring in Lancaster near BNSF Railway?
Can we get a line beneath Pleasant Run Road or Ten Mile Creek without cutting the surface? Yes, we take Lancaster work in Dallas County, where the Census Bureau Vintage 2024 estimate lists 40,780 residents. Our crews install water, sewer, gas, electric conduit and fiber for routes along Dallas Avenue, under Interstate 35 or toward the City of Lancaster water system.
Our main office is in Yukon, Oklahoma, and Lancaster work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We started as a family business in 1965 and have done directional boring since 1982; the 3/4 inch service line to 48 inch casing range can fit a service near Houston School Road or a larger crossing by BNSF Railway.

What does the soil survey show about Lancaster and Houston Black soil?
The USDA soil survey maps Houston Black soil across 38% of Lancaster. Its map units include Houston Black clay on both 1 to 3 percent slopes and 0 to 1 percent slopes. About 40 inches below the surface, clay makes up 46% of the mapped texture, and average clay content at that depth is 52%. At the surface, clay covers 47% and silty clay 41%. These are mapped patterns, not test borings; they point to sticky ground that can cling to a reamer and grip pipe.
| USDA soil survey, inside the Lancaster city limits | What is mapped |
|---|---|
| Soil series mapped | Houston Black 38 percent, Austin 29 percent, Eddy 11 percent, Branyon 6 percent and Lewisville 5 percent |
| Texture at the surface | clay 47 percent, silty clay 41 percent and clay loam 12 percent |
| Texture about 40 inches down | clay 46 percent, bedrock 44 percent and silty clay 11 percent |
| Engineering class about 40 inches down | fat clay (CH) 55 percent |
| Average clay content about 40 inches down | 52 percent |
| Bedrock mapped within 60 inches | 44 percent of the area (0 percent hard rock, 44 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 88 percent of the area |
The USDA soil survey maps bedrock within 40 inches across 44% of Lancaster, with typical depth listed as 24 inches; weathered bedrock can slow a bore compared with soil. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 4%. High steel corrosion risk is mapped across 88%, so the line owner should consider casing and tracer wire materials; HDPE is not affected by that soil concern. The map also lists Silty clay decomposition residuum, a Cenozoic unit, and Austin Chalk, of Late Cretaceous age.
How do we drill Lancaster clay?
Houston Black clay and silty clay call for controlled fluid and staged reaming. On a Lancaster route, we watch the returns and keep the pipe ready so the hole is not left open longer than needed.
- Houston Black clay can ball on the reamer and grip pipe, so we use a thinner fluid mix, ream in stages and plan to pull the line the day the hole opens.
- With heavy clay mapped around Lancaster, we watch fluid returns beneath pavement on Dallas Avenue so pressure does not lift the surface.
- Where a Lancaster route meets weathered bedrock, such as ground described in the Silty clay decomposition residuum map unit, we expect slower cutting than in ordinary dirt.
- Before a bore near Ten Mile Creek, we pothole marked utilities with hydrovac, then track the drill head from the surface and log depth and pitch.

What does a bore have to cross in Lancaster near Pleasant Run Road?
Interstate 35 and Interstate 20 pass through Lancaster, along with US 77 and Texas State Highway 342; Interstate 45 is 1.2 miles from the city limits. A line beneath existing highway pavement needs a bore or tunnel rather than an open trench. Pleasant Run Road runs 12.5 miles in town, while Dallas Avenue covers 9.19 miles and Houston School Road 8.04 miles. Those long street routes can involve pavement, driveways and buried services, so we plan the entry and exit pits outside the surface we need to keep intact.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 35 | Interstate | 7.2 roadway miles inside | State highway office |
| Interstate 20 | Interstate | 4.1 roadway miles inside | State highway office |
| US 77 | US highway | 7.2 roadway miles inside | State highway office |
| Texas State Highway 342 | State highway | 8.8 roadway miles inside | State highway office |
| Interstate 45 | Highway nearby | 1.2 miles outside | State highway office |
| BNSF Railway | Railroad | 6.08 track miles inside | The railroad |
| Union Pacific | Railroad nearby | 0.8 miles outside | The railroad |
| Ten Mile Creek | Stream | 9.96 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Mill Creek | Stream | 4.48 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Deep Branch | Stream | 4.33 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Keller Creek | Stream | 3.88 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bear Creek | Stream | 3.22 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Five Mile Creek | Stream | 1.5 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Floyd Branch | Stream | 1.49 channel miles inside | Checked for Corps of Engineers jurisdiction |
BNSF Railway has 6.08 track miles in Lancaster, and public records map 12 street and rail crossings in the city. A crossing of BNSF Railway track needs the railroad’s agreement, which sets the crossing conditions. Ten Mile Creek runs 9.96 channel miles in town; Mill Creek and Deep Branch are also mapped streams. Public records show 41 street crossings of named streams. A creek route is checked for federal waterway jurisdiction during planning, and the banks can stay uncut with a bore.
Who approves a Lancaster bore in Dallas County?
Because Lancaster is incorporated, we account for city ownership when planning boring beneath its streets. For work in the right of way of Interstate 35, Interstate 20, US 77 or Texas State Highway 342, the line owner, not the driller, submits the utility application through TxDOT’s RULIS system. We prepare the bore plan and profile for that filing, and the TxDOT Dallas District reviews it. At highway crossings, electric, communication and water lines need at least 60 inches of cover below the lowest crossed grade; pressurized sewer lines also need 60 inches. A BNSF Railway crossing requires its owner’s agreement, and Ten Mile Creek is checked for federal waterway jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Lancaster near City of Lancaster water?
The City of Lancaster public water system uses purchased surface water and serves 40,449 people through 13,384 service connections. Lancaster Municipal Utility District 1 is also listed as a public water system. In Dallas County, Oncor Electric Delivery Company, Texas-New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric Cooperative report electric service. Those countywide records do not identify the provider at each address, so we confirm the line owner before planning an electric conduit bore near Dallas Avenue.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Lancaster | Public water system | Surface water bought from another system | 13,384 connections, 40,449 people served |
| Lancaster Municipal Utility District 1 | Public water system | Surface water bought from another system | 895 connections, 2,685 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric Cooperative | Electric utilities reporting service in Dallas County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Lancaster’s median housing year at 1990; 12% of homes were built before 1960, 57% from 1960 to 1999 and 31% in 2000 or later. That mix can mean either a replacement route or a new service, not a known line age. Before drilling near Houston School Road, we hydrovac pothole each marked utility on the route because surface paint shows position, not depth.

Do you cover Lancaster and nearby Hutchins?
Lancaster is an incorporated city in Dallas County, at an elevation of 534 feet, with 33.07 square miles of land. ZIP codes 75146 and 75134 identify Lancaster addresses we account for when planning underground boring. Hutchins is 4.9 miles northeast, DeSoto 5.2 miles west and Wilmer 5.4 miles east; Dallas, the county seat and nearest larger city listed, is 13.6 miles north. From our Yukon, Oklahoma yard, the route is 235 road miles and about a 4.7 hour drive. Those distances matter when a Lancaster job needs equipment mobilized from our main office.
Places near Lancaster
- Bear Creek Ranch: 2.6 miles south
- Directional boring in Hutchins: 4.9 miles northeast
- Directional boring in DeSoto: 5.2 miles west
- Directional boring in Wilmer: 5.4 miles east
- Directional boring in Glenn Heights: 5.6 miles southwest
- Directional boring in Dallas: 13.6 miles north
What would we bore in Lancaster near Ten Mile Creek?
- Highway crossing: A line beneath Interstate 35 needs a planned bore route and entry pits that keep existing highway pavement uncut.
- Water service: A service toward the City of Lancaster system can run beneath Dallas Avenue while the pavement and driveways stay intact.
- Fiber conduit: A Houston School Road route can carry fiber conduit, with marked utilities exposed before the drill nears them.
- Creek crossing: A Ten Mile Creek bore can pass below the channel, with the crossing checked for federal waterway jurisdiction during planning.
- Rail crossing: A route under BNSF Railway track needs the railroad owner’s agreement and a plan that follows its crossing conditions.
- Street crossing: Pleasant Run Road stretches 12.5 miles through town, making its pavement and buried services part of route planning.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of a Lancaster bore near Belt Line Road?
For a route along Belt Line Road, start with the address or a map pin, then tell us what will go underground. Give us the pipe or conduit size and the footage, such as a short service connection or a longer run. A sketch or plans showing the route toward Interstate 35 or Ten Mile Creek help us see the crossings and pit locations.
A clear route along Belt Line Road with open pit locations is simpler to plan than a path with several buried utilities or pavement constraints. Price depends on bore length and size, Houston Black clay or weathered bedrock, utilities to expose, pavement, creek crossings, pits and excavator time. A BNSF Railway crossing changes the coordination, and Ten Mile Creek adds crossing planning. Lancaster is 235 road miles from Yukon, so mobilization is part of the job scope too.
Questions people ask about boring in Lancaster
Does Trinity Boring Solutions take directional boring jobs in Dallas County near Lancaster?
Yes. We take work in Lancaster and across Texas, with crews and partner contractor satellite yards supporting jobs rather than a Lancaster office. Our main office is in Yukon, Oklahoma, and you work with Trinity from the first call through the bore log, including a route near Dallas Avenue.
Can a line be bored under Ten Mile Creek in Lancaster?
A bore can be planned beneath Ten Mile Creek to avoid cutting the channel or its banks. The stream runs 9.96 channel miles in Lancaster, so the crossing route and depth need site planning. During planning, the crossing is checked for federal waterway jurisdiction.
Who runs Lancaster’s public water system, and where does its water come from for planning nearby underground work?
The City of Lancaster runs a public water system that uses purchased surface water. Public records list 13,384 service connections and 40,449 people served, figures we consider when planning underground work in Lancaster. Lancaster Municipal Utility District 1 is also listed as a public water system, so confirm the provider for a specific address before planning a connection.
Which electric company serves my Lancaster address in Dallas County, and who confirms conduit specs?
County records list Oncor Electric Delivery Company, Texas-New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric Cooperative as reporting service in Dallas County. That list does not establish the provider at a particular Belt Line Road address. We confirm the line owner before planning a conduit bore.
Does Lancaster control Houston School Road, and does a bore require cutting it?
Lancaster is incorporated, so the city itself has its streets, including Houston School Road. Directional boring can put a line beneath the road without opening a trench through its pavement. The route still needs planning around marked utilities and the entry and exit pits.
How old are buried lines near Dallas Avenue in Lancaster, and what does that mean for a replacement bore?
The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1990, but they do not date individual buried lines. A replacement bore near Dallas Avenue needs the existing route and proposed line size. Before drilling near marked utilities in Lancaster, we expose them and plan the bore around their locations.
Can I reach Trinity after hours for an urgent bore near Houston School Road in Lancaster?
Yes. A person answers Trinity’s phone 24 hours a day at (405) 409-7423, and we provide 24 hour emergency response. For an urgent job near Houston School Road, be ready to describe what line is involved and where it needs to cross.
How much notice does Texas811 need for a Lancaster bore near Pleasant Run Road?
For a bore near Pleasant Run Road, Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, make a new request; have worn or moved marks refreshed through Texas811 before work continues.
What affects the cost of a directional bore in Lancaster near Interstate 35?
The job details drive the price, not just footage. For a Lancaster route near Interstate 35, length, pipe size, Houston Black clay or rock, exposed utilities, pavement, creek crossings and pit work all affect the scope. A BNSF Railway crossing and the 235 road miles from Yukon can also affect planning and mobilization.
Where the Lancaster facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Lancaster
- U.S. Census Bureau, TIGER/Line 2024: Lancaster boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Lancaster
- U.S. Census Bureau, American Community Survey 2019 to 2023: Lancaster housing units and year built
- Macrostrat geologic map compilation: map units under Lancaster
- U.S. EPA Safe Drinking Water Information System: public water systems serving Lancaster
- U.S. Department of Transportation, North American Rail Network: track owners in Dallas County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Dallas County
- U.S. Geological Survey, Elevation Point Query Service: Lancaster elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Lancaster
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Lancaster
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Lancaster, Texas
Type the address of your job in Lancaster. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Lancaster
Same county: Irving · Garland · Mesquite · Grand Prairie · Richardson · Rowlett · Carrollton · Cedar Hill · Coppell · Duncanville · Farmers Branch · Balch Springs. All counties: Texas county list.
