Mesquite Texas Directional Boring: Houston Black, Union Pacific and Interstate 20
Quick Answer: Houston Black clay is sticky, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Mesquite for crossings such as Union Pacific track. Mesquite is 232 road miles from our Yukon, Oklahoma, main office, and Galloway Avenue runs 11.3 miles through the city. The USDA soil survey maps clay across 87 percent of Mesquite, where sticky cuttings can ball on the reamer and grip pipe. On Galloway Avenue, that calls for staged reaming and pulling pipe the day the hole opens.
Mesquite bores at a glance
- Incorporated city in Dallas County and Kaufman County, Texas. Population 150,140 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 232 miles, about 4.6 hours of driving.
- Ground: Houston Black soil is mapped on 39 percent of the area, with clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 12 percent of the area.
- Highways inside the boundary: Interstate 20, Interstate 635, Interstate 30, US 80 and US 67. State permit office: TxDOT Dallas District.
- Railroad track inside the boundary: Union Pacific, with 22 mapped street and rail crossings.
- Named streams inside the boundary: North Mesquite Creek, South Mesquite Creek, East Fork Trinity River and Long Branch Creek.
- Public water: City of Mesquite, surface water bought from another system.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring on Galloway Avenue in Mesquite?
Houston Black clay can stick to the reamer, so we plan each bore around the ground as well as its route. Mesquite is in Dallas County and Kaufman County. Mesquite’s Census Bureau Vintage 2024 estimate puts population at 150,140, a planning figure for underground work across town. We install water, sewer, gas, electric conduit and fiber lines beneath routes such as Galloway Avenue, where a bore can keep the street surface uncut.
Our main office is in Yukon, Oklahoma, and Mesquite work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Trinity is a family business started in 1965, with directional boring work dating to 1982. We have had no utility strike in over 25 years, a record we bring to planning around City of Mesquite water lines and the electric providers reported in Dallas County.

How does Houston Black soil affect a directional boring alignment in Mesquite?
Houston Black is the most common mapped soil series in Mesquite, covering 39 percent of the city area in the USDA soil survey. The survey maps surface clay across 87 percent of the area. At about 40 inches below the surface, it maps clay across 94 percent, with an average clay content of 54 percent. Across Mesquite, Houston Black soil maps show mapped patterns only; we do not treat them as test borings for a bore. Houston Black clay holds a bore open, but it is sticky. Cuttings can gather on the reamer, while wet clay can swell and grip the pipe during pullback.
| USDA soil survey, inside the Mesquite city limits | What is mapped |
|---|---|
| Soil series mapped | Houston Black 39 percent, Trinity 15 percent, Ferris 12 percent, Heiden 11 percent and Branyon 6 percent |
| Texture at the surface | clay 87 percent, silty clay 5 percent and clay loam 5 percent |
| Texture about 40 inches down | clay 94 percent and silty clay 5 percent |
| Engineering class about 40 inches down | fat clay (CH) 93 percent and lean clay (CL) 7 percent |
| Average clay content about 40 inches down | 54 percent |
| Bedrock mapped within 60 inches | 12 percent of the area (0 percent hard rock, 12 percent weathered rock) |
| Seasonal water table within 60 inches | 4 percent of the area |
| Flood prone soils | 16 percent of the area |
| High corrosion risk for uncoated steel | 99 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches in 12 percent of Mesquite; hard bedrock is not mapped within that depth. A bore may meet softer rock, so the drill head needs close steering checks. Seasonal water within 60 inches is mapped in 4 percent of the area, while flood prone soils cover 16 percent, making creek routes a depth and water management concern. In Mesquite, mapped high steel corrosion risk covers 99 percent, so we account for that concern when selecting bore materials. The local Silty clay decomposition residuum is Cenozoic and strongly clay rich; Ozan Formation claystone is Late Cretaceous. The soil survey also maps concrete corrosion risk in 5 percent of the area.
How do we run a bore through Mesquite clay?
Mesquite’s mapped clay holds an open bore but can cling to the reamer and pipe. Around Houston Black soil, we manage fluid, advance in stages and prepare the pipe before opening the final hole.
- On Houston Black clay, we use thinner drilling fluid with polymer and ream in stages so sticky cuttings do not build up on the reamer.
- Because Mesquite’s mapped ground is heavily clay textured, we watch fluid returns near pavement to avoid pressure lifting the street surface.
- We have pipe ready before the last ream on a Galloway Avenue route, then pull it the same day the hole is opened.
- At North Mesquite Creek, we plan bore depth beneath the channel and check the crossing for U.S. Army Corps of Engineers jurisdiction.

What does a bore have to cross in Mesquite near Union Pacific?
Interstate 20, Interstate 635 and Interstate 30 run through Mesquite, along with US 80 and US 67. A bore beneath one of these routes has to follow the applicable highway permit and cover requirements. Galloway Avenue is the city’s longest named street at 11.3 miles. Town East Boulevard runs 9.99 miles and Cartwright Road runs 9.98 miles. Those long street corridors can carry multiple utilities, so we plan the bore path and expose marked lines before drilling near them.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Interstate 20 | Interstate | 15 roadway miles inside | State highway office |
| Interstate 635 | Interstate | 14.4 roadway miles inside | State highway office |
| Interstate 30 | Interstate | 8.7 roadway miles inside | State highway office |
| US 80 | US highway | 11.1 roadway miles inside | State highway office |
| US 67 | US highway | 8.7 roadway miles inside | State highway office |
| Texas State Highway 352 | State highway | 8.4 roadway miles inside | State highway office |
| FM 2757 | State highway | 1.7 roadway miles inside | State highway office |
| FM 2932 | State highway | 1.4 roadway miles inside | State highway office |
| FM 740 | State highway | 1 roadway miles inside | State highway office |
| FM 741 | State highway | 0.5 roadway miles inside | State highway office |
| Loop 12 | Highway nearby | Runs along or touches the city limits | State highway office |
| Union Pacific | Railroad | 21.65 track miles inside | The railroad |
| North Mesquite Creek | Stream | 12.62 channel miles inside | Checked for Corps of Engineers jurisdiction |
| South Mesquite Creek | Stream | 9.6 channel miles inside | Checked for Corps of Engineers jurisdiction |
Union Pacific track runs 21.65 miles through Mesquite on the Mineola Subdivision, and the city has 22 mapped street and rail crossings. A bore beneath the track needs an agreement with Union Pacific covering casing, depth and flagging. Mesquite also has North Mesquite Creek, South Mesquite Creek and the East Fork Trinity River, among other streams. The city has 48 mapped street crossings of named streams. Creek work needs a planned depth, and the crossing is checked for federal waterway jurisdiction.
Do I need a permit to bore in Mesquite or Dallas County?
For a bore along a Mesquite street such as Galloway Avenue, the city controls its own streets. Interstate 20, Interstate 635, US 80 and other state highway rights of way require a TxDOT utility permit. The utility owner submits the application through RULIS, and the TxDOT Dallas District reviews it; we prepare the bore plan and profile and work under the permit issued to that owner. Highway cover depends on the line type. A Union Pacific track crossing needs an agreement with the railroad, and creek routes in Mesquite are checked for U.S. Army Corps of Engineers jurisdiction.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which water and electric lines does the City of Mesquite own in Mesquite?
The City of Mesquite public water system uses purchased surface water and reports 46,311 service connections serving 158,412 people. For an electric conduit bore, we first identify the line owner. Utilities reporting service in Dallas County include Oncor Electric Delivery Company, Texas New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric Cooperative. The provider can vary by address, so its identity matters before routing a conduit beneath a Mesquite street.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Mesquite | Public water system | Surface water bought from another system | 46,311 connections, 158,412 people served |
| Oncor Electric Delivery Company, Texas-New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric Cooperative | Electric utilities reporting service in Dallas County and Kaufman County | EIA Form 861 | Confirm the line owner by address |
Mesquite’s American Community Survey 2019 to 2023 five year estimates put median housing year at 1983; we use that context when planning underground work. The estimates show 13 percent of homes built before 1960, 73 percent built from 1960 to 1999 and 14 percent built in 2000 or later. On older streets such as Galloway Avenue, existing water, electric and communication lines may share a crowded route. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows position, not depth.

How far is Mesquite from Sunnyvale and our Yukon yard?
Mesquite covers 49.1 square miles in Dallas County and Kaufman County, at an elevation of 500 feet. Its ZIP codes are 75149, 75181, 75150 and 75126. Sunnyvale is 3.2 miles northeast, and Balch Springs is 3.7 miles southwest. Dallas, the nearest larger city and the Dallas County seat, is 10.8 miles west. Our Yukon yard is 232 road miles away, a 4.6 hour drive. That distance is part of planning mobilization for work near Interstate 20 or the city’s many miles of streets.
Places near Mesquite
- Directional boring in Sunnyvale: 3.2 miles northeast
- Directional boring in Balch Springs: 3.7 miles southwest
- Directional boring in Travis Ranch: 6.8 miles northeast
- Directional boring in Seagoville: 7.7 miles south
- Directional boring in Forney: 7.7 miles east
- Directional boring in Dallas: 10.8 miles west
What kinds of bores come up in Mesquite near Town East Boulevard?
- Highway crossing: A bore under Interstate 20 needs a route and cover plan that matches the line type and the TxDOT permit.
- Water service: A service connection near the City of Mesquite system may need a bore beneath a paved street rather than an open cut.
- Fiber route: A conduit bore along Town East Boulevard can keep the roadway surface intact while the line follows the planned path.
- Creek crossing: At South Mesquite Creek, the bore needs a planned depth beneath the channel and a jurisdiction check during planning.
- Rail crossing: A bore beneath Union Pacific track needs the railroad’s agreement for casing, depth and flagging.
- Street utility: Along Cartwright Road, hydrovac potholes expose marked utilities before the drill approaches their position.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for a Mesquite bore near Interstate 20?
Send a map pin or street address near Interstate 20, Cartwright Road or a named creek. The exact route helps us identify street, highway, track and water crossings. For a Mesquite bore crossing, we need the material going underground, pipe or conduit size, and footage. A sketch or plans can show the pits and route more clearly.
Price follows the work, not a single footage figure. Ground conditions matter: Houston Black clay can cling to the reamer and pipe. Crossings add planning and exposure work near Union Pacific track, Interstate 20 or a Mesquite creek. Pipe size, length, pavement, concrete, pits, excavator time and sand backfill also affect the scope. The 232 road miles from Yukon can affect mobilization, as can urgent or high profile work.
Questions people ask about boring in Mesquite
Does Trinity take directional boring jobs in Mesquite and Dallas County, and who staffs them?
Yes. We take directional boring work in Mesquite and across Texas, planning each crossing around its site conditions. Our own crews handle jobs, and vetted drilling partners can work from satellite yards; Trinity remains your contact from the first call through the bore log. For a Dallas County route such as Galloway Avenue, the crew plan follows the site and bore scope.
Does Houston Black soil in Mesquite corrode steel, and what pipe can be used?
The USDA soil survey maps high steel corrosion risk across 99 percent of Mesquite, including areas with Houston Black soil. With Houston Black soil in Mesquite, HDPE is not affected by that soil corrosion concern, so material choice can account for it. The line owner selects any coating for steel casing or tracer wire, so we confirm the specified material before planning a bore near Galloway Avenue.
What ground is a Mesquite bore likely to pass through in Houston Black soil?
Houston Black is mapped across 39 percent of Mesquite. At about 40 inches below the surface, the USDA soil survey maps clay across 94 percent of the area and reports an average clay content of 54 percent. That sticky ground can ball on a reamer and grip the pipe, so staged reaming and a timely pull matter.
Is there rock in Mesquite, and how much bedrock is mapped near the surface?
Weathered bedrock is mapped within 60 inches in 12 percent of Mesquite, while hard bedrock is not mapped within that depth. The Silty clay decomposition residuum is a mapped Cenozoic unit. A bore near South Mesquite Creek still needs steering and depth checks because mapped soil conditions do not describe every point along the route.
Who approves a bore under Interstate 20 in Mesquite?
The utility owner submits the TxDOT utility permit application in RULIS, and the TxDOT Dallas District reviews it. For work in Mesquite, we supply the bore plan and profile and follow the permit issued to the utility owner. Interstate 20 is within Mesquite, so the highway route and line type determine the required cover.
What does a Mesquite bore beneath Union Pacific track require?
It needs an agreement from Union Pacific, which owns 21.65 track miles in Mesquite. The railroad sets the crossing conditions for casing, depth and flagging. We account for those conditions when planning a bore beneath its Mineola Subdivision track rather than treating the route like an ordinary street crossing.
Can Trinity answer after hours about an urgent bore near Cartwright Road in Mesquite?
Yes. A person answers our phone at (405) 409-7423 24 hours a day. Call with the Cartwright Road location and what the urgent work involves so we can understand the route, line and timing. Mesquite work is handled by our crews or vetted partner contractors, not a local office.
How much Texas811 notice is needed for a Mesquite bore along Galloway Avenue?
The locate request for a Galloway Avenue bore must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Mesquite bore start slips more than 14 days past the original notice, we ask for a new request. In Mesquite, we refresh worn or moved marks through Texas811 before work continues.
What affects the cost of a directional bore near Interstate 20 in Mesquite?
The scope sets the price. Houston Black clay, bore length and pipe size affect the drilling work; Interstate 20, Union Pacific track and creek crossings can add planning and exposure needs. Pavement, pits, excavator time, backfill, emergency timing and mobilization from Yukon also matter. Share the route and plans so we can assess those details.
Where the Mesquite facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Mesquite
- U.S. Census Bureau, TIGER/Line 2024: Mesquite boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Mesquite
- U.S. Census Bureau, American Community Survey 2019 to 2023: Mesquite housing units and year built
- Macrostrat geologic map compilation: map units under Mesquite
- U.S. EPA Safe Drinking Water Information System: public water systems serving Mesquite
- U.S. Department of Transportation, North American Rail Network: track owners in Dallas County and Kaufman County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Dallas County and Kaufman County
- U.S. Geological Survey, Elevation Point Query Service: Mesquite elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Mesquite
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Mesquite
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Mesquite, Texas
Type the address of your job in Mesquite. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Mesquite
County: Starr County directional boring. Same county: Irving · Garland · Grand Prairie · Richardson · Rowlett · DeSoto · Carrollton · Cedar Hill · Lancaster · Coppell · Duncanville · Farmers Branch. All counties: Texas county list.
