trinityboringsolutions.com

Lake Kiowa Texas Directional Boring: Konsil Loamy Fine Sand, FM 902 and Indian Creek

Quick Answer: Lake Kiowa is an unincorporated community in Cooke County, where we use directional boring, also called horizontal directional drilling (HDD), to place lines beneath Indian Creek. Public streets such as Kiowa Drive are county roads, while FM 902 is a state highway. Our Yukon, Oklahoma main office is 159 road miles away, and FM 902 access affects mobilization. The USDA soil survey maps sandy clay loam at about 40 inches across 53 percent of the area; its clay can hold a bore open but may grip the pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lake Kiowa bores at a glance

  • Unincorporated community in Cooke County, Texas. Population 2,254 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 159 miles, about 3.3 hours of driving.
  • Ground: Konsil soil is mapped on 21 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 16 percent of the area.
  • Highways inside the boundary: FM 902. State permit office: TxDOT Wichita Falls District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Indian Creek.
  • Public water: Lake Kiowa Special Utility District, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near FM 902 in Lake Kiowa?

Lake Kiowa is an unincorporated community in Cooke County with 2,254 people in the 2020 Census count; the Census Bureau does not publish yearly estimates for unincorporated places. With no city government, its public streets are county or state roads. We install water, sewer, gas, electric conduit and fiber along routes such as Kiowa Drive or toward FM 902.

Our main office is in Yukon, Oklahoma, and Lake Kiowa work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our record of no utility strike in over 25 years matters around Kiowa Drive, where the Lake Kiowa Special Utility District water system and electric lines need to be located before drilling. Trinity is a family business started in 1965 and has done directional boring since 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Lake Kiowa and Konsil soil?

The USDA soil survey maps Konsil across 21 percent of Lake Kiowa, with Konsil loamy fine sand mapped across 13 percent. Loamy fine sand is the leading surface texture, mapped across 43 percent. At about 40 inches below the surface, sandy clay loam is mapped under 53 percent of the area, and average clay content there is 25 percent. For bore planning in Lake Kiowa, we use mapped Konsil soil patterns as screening information, not as a substitute for test borings. The mix matters: the sandy upper layer can loosen behind a drill, while the deeper clay bearing material can hold the hole and cling to the reamer.

USDA soil survey, inside the Lake Kiowa mapped community boundaryWhat is mapped
Soil series mappedKonsil 21 percent, Heaton 18 percent, Birome 15 percent, Gasil 13 percent and Gowen 4 percent
Texture at the surfaceloamy fine sand 43 percent, stony fine sandy loam 15 percent and fine sandy loam 14 percent
Texture about 40 inches downsandy clay loam 53 percent, bedrock 15 percent and clay loam 4 percent
Engineering class about 40 inches downlean clay (CL) 59 percent and silty sand (SM) 3 percent
Average clay content about 40 inches down25 percent
Bedrock mapped within 60 inches16 percent of the area (0 percent hard rock, 16 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils4 percent of the area
High corrosion risk for uncoated steel19 percent of the area

Bedrock is mapped within 60 inches across 16 percent of Lake Kiowa, and weathered bedrock is mapped across that same share; hard bedrock is not mapped in that depth range. A typical mapped bedrock depth is 36 inches, so the route needs checking rather than an assumption of uniform soil. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 4 percent, including places to consider near Indian Creek. For Lake Kiowa bore planning, we account for high steel corrosion risk mapped across 19 percent when choosing materials and evaluating crossings. The geologic map includes Quartz Sand Decomposition Residuum of Cenozoic age and the Woodbine Formation of Cenomanian age, with sand, sandstone and mudstone that can change drilling resistance.

How do we drill Lake Kiowa’s sandy clay loam near Kiowa Drive while confirming actual soil conditions along the bore route?

Lake Kiowa’s sandy upper soils and sandy clay loam farther down call for control of both the open hole and the drilling fluid. We adjust the pass to the ground shown along the route.

  1. Where Konsil loamy fine sand is mapped, we keep the hole supported with drilling fluid and stage the reaming so loose sand does not cave behind the bit.
  2. In the sandy clay loam mapped at about 40 inches, we use controlled fluid and staged passes to limit sticky buildup on the reamer and pipe.
  3. For a proposed line beneath Kiowa Drive, we hydrovac pothole each marked utility on the bore path before the drill approaches it; locate paint does not show depth.
  4. Near Indian Creek, we plan the bore depth around the channel and check for U.S. Army Corps of Engineers jurisdiction during crossing review.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

What is in the way of a new line in Lake Kiowa near Indian Creek?

FM 902 is the state highway mapped inside Lake Kiowa, with 2.6 roadway miles in the community. Kiowa Drive is the longest named street at 10.15 miles, followed by Navajo Trail at 1.05 miles and Cocopa Drive at 0.79 miles. Those routes give a bore plan specific road and access points to work around. The mapped community has 34.14 public road centerline miles, so the actual line route matters more than a general address when we plan pits and crossing depths.

CrossingTypeMapped extentWho has a say
FM 902State highway2.6 roadway miles insideState highway office
Indian CreekStream0.7 channel miles insideChecked for Corps of Engineers jurisdiction
Wolf CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Lake KiowaLake or pond511 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Lake Kiowa or within one mile outside the mapped community boundary, and no street and rail crossing is mapped. Indian Creek runs 0.7 channel miles inside the community, with four mapped street crossings of named streams. A proposed bore near the creek needs a route and depth planned for the channel. Lake Kiowa itself is a 511 acre lake inside the community, so a line proposed near its shore also needs site specific crossing review.

Who approves a bore in Lake Kiowa and Cooke County?

Lake Kiowa has no city government, so public streets fall under county or state control. FM 902 is the state highway here, and work in its right of way needs a TxDOT utility permit reviewed by the Wichita Falls District. The utility that owns the line submits the application through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the utility owner’s permit. A crossing beneath Indian Creek is checked during planning for U.S. Army Corps of Engineers jurisdiction. No railroad is mapped near the community, so no local track crossing is identified in the public records.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the Lake Kiowa Special Utility District lines?

The Lake Kiowa Special Utility District is a local government water system using groundwater wells. It serves 2,848 people through 1,414 service connections, so its buried water lines are a key locate before a new bore near Kiowa Drive or FM 902. Utilities reporting electric service in Cooke County include Oncor Electric Delivery Company, Texas New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Grayson Collin Electric Cooperative and Wise Electric Cooperative. Before an electric conduit bore along FM 902, we confirm the line owner and coordinate the crossing plan.

Line ownerWhat it isSourceSize
Lake Kiowa Special Utility DistrictPublic water systemGroundwater wells1,414 connections, 2,848 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, Cooke County Electric Cooperative Association, Denton County Electric Cooperative, Grayson-Collin Electric Cooperative and Wise Electric CooperativeElectric utilities reporting service in Cooke CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Lake Kiowa’s median housing year at 1994; 1 percent of housing units were built before 1960, 67 percent from 1960 to 1999 and 32 percent in 2000 or later. That mix can mean either an older line replacement or a service for newer housing. Before a drill approaches a marked line, we expose it with hydrovac potholing; paint near Kiowa Drive shows position, not depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Lake Kiowa from Gainesville and our Yukon office?

Lake Kiowa is in Cooke County, at an elevation of 708 feet, and covers 2.99 square miles within its mapped community boundary. Its ZIP code is 76240. Oak Ridge is 5.5 miles north, Collinsville is 6.1 miles east, and Whitesboro is 8.8 miles northeast. Gainesville, the county seat and nearest larger city, is 9.1 miles northwest. From our Yukon, Oklahoma main office, Lake Kiowa is 159 road miles away and a 3.3 hour drive. The distance affects crew mobilization and should be considered when setting the work schedule.

Places near Lake Kiowa

Which jobs call for a bore near Kiowa Drive in Lake Kiowa?

  • Highway crossing: A line beneath FM 902 needs a bore plan for the state highway right of way and the utility owner’s TxDOT permit.
  • Water service: A service near Kiowa Drive can connect to the Lake Kiowa Special Utility District system after marked lines are exposed.
  • Fiber drop: A fiber route along Navajo Trail can use a narrow conduit bore that avoids opening the public road surface.
  • Creek crossing: A proposed line under Indian Creek needs channel depth planning and a jurisdiction check during project planning.
  • Lake side route: A bore near the 511 acre Lake Kiowa shoreline needs a route that accounts for the water edge and access for pits.
  • Street service: A new line along Cocopa Drive can be bored between work pits, with marked utilities checked before drilling.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Lake Kiowa bore near Cayuga Trail?

Start with an address or map pin, such as a point on Cayuga Trail or along FM 902. Tell us what will go in the ground, whether water, sewer, gas, electric conduit or fiber, then give the pipe or conduit size and footage. A sketch or plans help show pits, access and any nearby feature such as Indian Creek.

On Navajo Trail, our price follows the defined job scope for the bore. Ground conditions matter: Konsil loamy fine sand and the deeper sandy clay loam can call for different reaming and fluid control. Crossings matter too, including Indian Creek, marked utilities and pavement on FM 902. Length, pipe size, exposed utilities, pit work, excavator time and sand backfill all affect the plan. The 159 road miles from Yukon also affect mobilization, while emergency or high profile work can add planning needs.

Questions people ask about boring in Lake Kiowa

Does Trinity take directional boring jobs in Lake Kiowa and Cooke County?

Yes. We take directional boring work in Lake Kiowa, including routes near FM 902 and Indian Creek. Our crews handle the bore, and work may also run from a satellite yard operated by a drilling contractor we have vetted. From our first call through the bore log, we guide Lake Kiowa projects, 159 road miles from the Yukon main office, regardless of which crew is on site.

What ground should I expect for a Lake Kiowa bore near Konsil soil?

The USDA soil survey maps Konsil across 21 percent of Lake Kiowa and loamy fine sand across 43 percent at the surface. At about 40 inches, sandy clay loam is mapped across 53 percent. That lower material can hold the hole and cling to the reamer, while loose upper sand can cave behind the bit.

Is rock likely on a directional bore in Lake Kiowa?

The soil survey maps bedrock within 60 inches across 16 percent of Lake Kiowa, with weathered bedrock mapped across 16 percent and no hard bedrock mapped in that range. Typical bedrock depth is 36 inches. The route still needs checking because the mapped Woodbine Formation includes sandstone and mudstone.

Who approves a bore under FM 902 in Lake Kiowa?

TxDOT reviews work in the FM 902 right of way through its Wichita Falls District. The utility that owns the line files in TxDOT’s RULIS system, while we provide the bore plan and profile and work under the permit issued to that utility. Other public streets in Lake Kiowa are county roads because the community has no city government.

Can a line be bored under Indian Creek in Lake Kiowa?

A bore can be planned beneath Indian Creek, which has 0.7 channel miles inside Lake Kiowa. The route and depth need to account for the channel, and the crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. Four street crossings of named streams are mapped in the community.

How do we verify Lake Kiowa’s public water system operator and water source before planning a bore near Indian Creek?

The Lake Kiowa Special Utility District runs the public water system, and its source is groundwater wells. Public records list 1,414 service connections and 2,848 people served; we use those figures as context when planning utility coordination in Lake Kiowa. Before a bore near Kiowa Drive, the existing district lines on the route need to be located and exposed.

How much 811 notice does a bore near Kiowa Drive in Lake Kiowa need?

Texas811 needs the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If a Kiowa Drive start slips more than 14 days past the original notice, make a new request. At a crossing on Comanche Drive, we have worn or moved marks refreshed through Texas811 before work continues.

Does the distance from Gainesville to Lake Kiowa change a bore job?

Lake Kiowa is 159 road miles and a 3.3 hour drive from our Yukon, Oklahoma main office; Gainesville is 9.1 miles northwest of the community. The distance from Yukon can affect crew mobilization and scheduling. A quote for a route near FM 902 or Cayuga Trail should include the work location and access details.

What affects the cost of directional boring near FM 902 in Lake Kiowa, where loamy fine sand can affect bore planning?

The price depends on the job scope, including bore length, pipe or conduit size, soil, exposed utilities, crossings, pavement and pit work. Konsil soil and sandy clay loam affect drilling conditions; an Indian Creek crossing adds channel planning. Work in the FM 902 right of way and mobilization from Yukon also affect the job.

Where the Lake Kiowa facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lake Kiowa

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lake Kiowa, Texas

Type the address of your job in Lake Kiowa. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lake Kiowa

Same county: Muenster · Lindsay · Valley View · Callisburg · Oak Ridge · Myra. All counties: Texas county list.