trinityboringsolutions.com

Oak Ridge Texas Directional Boring: Wilson Silt Loam, Texas State Highway 34, Anthony Branch

Quick Answer: At about 40 inches, Oak Ridge soils are mapped mostly as clay, over Kemp clay and Corsicana Marl. Wilson silt loam covers 22 percent of town, a sticky ground condition that can grip pipe. Trinity does directional boring, or horizontal directional drilling (HDD), beneath Texas State Highway 34 without cutting pavement. Oak Ridge is 255 road miles from Yukon, and Kaufman Road access affects mobilization.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Oak Ridge bores at a glance

  • Incorporated city in Kaufman County, Texas. Population 1,475 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 255 miles, about 5 hours of driving.
  • Ground: Wilson soil is mapped on 36 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 21 percent of the area.
  • Highways inside the boundary: Texas State Highway 34 and FM 2728. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Anthony Branch and Eagans Branch.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Anthony Branch in Oak Ridge?

What does the top five feet around Oak Ridge look like, and what lies below? The USDA soil survey maps Wilson silt loam and clay rich soils at about 40 inches, with Kemp clay and Corsicana Marl beneath. Trinity serves Kaufman County, where the Census Bureau Vintage 2024 estimate puts Oak Ridge at 1,475 people. Water, sewer, gas, electric conduit and fiber can follow streets such as Kaufman Road.

Our main office is in Yukon, Oklahoma, and Oak Ridge work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short Water Oak Drive service or a large casing bore near Texas State Highway 34, our range runs from 3/4 inch service lines to 48 inch casing and 10 feet to 5,000 feet. We are a family business started in 1965, with directional boring work dating to 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

How does Wilson soil affect drilling in Oak Ridge?

The USDA soil survey maps Wilson soil across 36 percent of Oak Ridge, followed by Mabank at 22 percent, Ferris at 13 percent, and Crockett and Gowen at 8 percent each. The mapped surface is a mix of fine sandy loam at 30 percent, silt loam at 29 percent and clay at 25 percent. At about 40 inches, clay is mapped across 91 percent of the area, with an average clay content of 45 percent. Wilson, Mabank, Ferris, and Crockett soils map surface fine sandy loam; we treat these as patterns, not test borings. Along Kaufman Road, sticky clay can ball on a reamer and grip the pipe.

USDA soil survey, inside the Oak Ridge city limitsWhat is mapped
Soil series mappedWilson 36 percent, Mabank 22 percent, Ferris 13 percent, Crockett 8 percent and Gowen 8 percent
Texture at the surfacefine sandy loam 30 percent, silt loam 29 percent and clay 25 percent
Texture about 40 inches downclay 91 percent and clay loam 8 percent
Engineering class about 40 inches downlean clay (CL) 58 percent and fat clay (CH) 41 percent
Average clay content about 40 inches down45 percent
Bedrock mapped within 60 inches21 percent of the area (0 percent hard rock, 21 percent weathered rock)
Seasonal water table within 60 inches8 percent of the area
Flood prone soils11 percent of the area
High corrosion risk for uncoated steel92 percent of the area

Weathered bedrock is mapped within 60 inches across 21 percent of Oak Ridge, with a typical mapped depth of 47 inches; hard bedrock is not mapped within that depth. The soil survey maps a seasonal water table within 60 inches across 8 percent and flood prone soils across 11 percent, so pits and creek approaches need attention after wet weather near Anthony Branch. High steel corrosion risk is mapped across 92 percent, which makes casing and tracer wire material a line owner decision. The geologic map names Kemp clay and Corsicana Marl, undivided, of Maastrichtian age.

How do crews handle clay in Oak Ridge?

Clay is the main concern in Oak Ridge: at about 40 inches, it is mapped across 91 percent of the area. Near Texas State Highway 34, we control fluid returns and keep the bore plan suited to the ground.

  1. In Oak Ridge’s heavy clay, we use a thinner drilling fluid with polymer and ream in stages so sticky cuttings do not build up on the reamer.
  2. Near Texas State Highway 34, we watch fluid returns and keep pressure low enough to avoid lifting pavement as the bore advances through clay.
  3. For a route near Anthony Branch, we plan depth below the channel and check creek crossing jurisdiction during planning before setting the bore path.
  4. Along Kaufman Road, we expose each marked utility on the bore path with hydrovac before drilling near it, then track and log drill depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What is in the way of a new line in Oak Ridge near Texas State Highway 34?

Texas State Highway 34 has 9.8 mapped roadway miles inside Oak Ridge, and FM 2728 has 2.0. Interstate 20 lies 0.6 miles outside the town limits. A line that follows Kaufman Road, the longest named street at 2.02 miles in town, may also need to account for Abner Road at 1.73 miles and Christie Lane at 0.56 miles. Highway pavement is bored or tunneled beneath rather than open cut. The route, right of way and travel lanes affect the crossing plan.

CrossingTypeMapped extentWho has a say
Texas State Highway 34State highway9.8 roadway miles insideState highway office
FM 2728State highway2 roadway miles insideState highway office
Interstate 20Highway nearby0.6 miles outsideState highway office
Anthony BranchStream1.18 channel miles insideChecked for Corps of Engineers jurisdiction
Eagans BranchStream1.13 channel miles insideChecked for Corps of Engineers jurisdiction
Kings CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Eagans CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Bachelor CreekStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Oak Ridge or within one mile outside its limits, so there is no local track crossing to plan around. Anthony Branch runs 1.18 channel miles in town, and Eagans Branch runs 1.13. Three mapped street crossings intersect named streams, making the exact route important. We account for Anthony Branch and Eagans Branch in Oak Ridge, where no lakes or ponds are mapped within one mile. A creek crossing near Anthony Branch is checked during planning for U.S. Army Corps of Engineers jurisdiction.

Who has to sign off on Oak Ridge work in Kaufman County?

For work in the Texas State Highway 34 or FM 2728 right of way, the line owner needs a TxDOT utility permit. The TxDOT Dallas District reviews it, and the utility owner files through the online RULIS system; we prepare the bore plan and profile for that application and work under the owner’s permit. TxDOT requires a bore or tunnel beneath existing highway pavement, and the crossing needs the cover set by its rules or the permit. Oak Ridge’s city streets, including Kaufman Road and Abner Road, belong to the city, so we plan boring coordination accordingly. For a route near Anthony Branch, planning checks whether the creek crossing falls under U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines in Oak Ridge and Kaufman County?

The water provider for a specific Oak Ridge address has to be confirmed with the city, Kaufman County or the local water district before a bore is planned. The available records do not match a provider to each address. Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report electric service in Kaufman County, but that does not identify the line owner at every Kaufman Road property. We confirm the owner before planning an electric conduit bore.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Kaufman CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Oak Ridge’s median housing year is 2000 in the 2019 to 2023 estimates; we plan bores along Kaufman Road by route conditions, not age. The estimates show 13 percent built before 1960, 37 percent from 1960 to 1999 and 50 percent in 2000 or later. That mix can mean a route near Water Oak Drive needs to work around both older utilities and newer service runs. Before the drill approaches a marked line, we use hydrovac potholing to expose it; paint shows where it is, not its depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

Where is Oak Ridge in relation to Kaufman?

Oak Ridge is an incorporated town in Kaufman County, at an elevation of 448 feet and covering 3.7 square miles. Oak Ridge’s ZIP codes are 75142 and 75161; we check whether a bore route reaches Texas State Highway 34 rather than relying on ZIP alone. Post Oak Bend is 3.1 miles west, while Kaufman is 4.3 miles southwest and serves as the county seat and nearest larger city. Oak Grove is 7.0 miles southwest, Terrell is 7.1 miles north and Talty is 9.0 miles northwest. From our Yukon, Oklahoma main office, the drive is 255 road miles and 5.0 hours, which matters when mobilizing crews for Kaufman Road work.

Places near Oak Ridge

What kinds of bores come up near Anthony Branch in Oak Ridge?

  • Highway crossing: A Texas State Highway 34 bore stays below the pavement, with the route and highway right of way covered in the permit plan.
  • Street service: A water or sewer service along Kaufman Road needs a route that accounts for the marked lines and clay below the surface.
  • Fiber conduit: A conduit route near Water Oak Drive can be bored beneath pavement and driveways rather than cutting across them.
  • Creek crossing: A line near Anthony Branch needs a planned path beneath the channel and a check for federal jurisdiction during planning.
  • Electric conduit: Along Abner Road, the electric line owner and conduit specifications need confirmation before the bore route is set.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Kaufman Road bore quote in Oak Ridge?

For a Kaufman Road quote, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help. The details that change the route most are the clay mapped at 40 inches and the nearby streets, drainage or highway right of way the bore must cross.

In Oak Ridge, soil and rock conditions are high on the list because clay makes up 91 percent of the mapped texture at about 40 inches, and weathered bedrock is mapped in parts of town. The number of utilities to cross and expose, pavement or concrete, and any Anthony Branch drainage crossing also change the work. Pipe size, bore length, pits, excavator time and sand backfill matter too. A Texas State Highway 34 permit crossing or mobilization from 255 road miles away adds planning needs.

Questions people ask about boring in Oak Ridge

Does Trinity take directional boring jobs in Oak Ridge and Kaufman County?

Yes. For Oak Ridge routes near FM 2728, we take directional boring work across Texas. Our own crews and crews from partner drilling contractors Trinity has vetted staff the work, while you deal with Trinity through the bore log. A Kaufman Road service or a Texas State Highway 34 crossing can be scoped from the address and plans.

What ground does a bore pass through in Oak Ridge near Wilson soil?

The USDA soil survey maps Wilson soil across 36 percent of Oak Ridge, with clay making up 91 percent of mapped texture at about 40 inches. That clay can stick to the reamer and grip the pipe. The map also identifies Kemp clay and Corsicana Marl, undivided, beneath the soils.

Is rock mapped within five feet of a bore in Oak Ridge?

Weathered bedrock is mapped within 60 inches across 21 percent of Oak Ridge, at a typical mapped depth of 47 inches. Hard bedrock is not mapped within that depth, but the map does not rule out rock farther down. A route near Anthony Branch still needs site specific planning.

Does the TxDOT Dallas District approve a bore under Texas State Highway 34 in Oak Ridge?

The utility owner applies for the TxDOT utility permit through RULIS for work in the Texas State Highway 34 right of way. TxDOT’s Dallas District reviews the application. We provide the bore plan and profile for the utility owner’s filing, then work under the permit issued to that owner.

Can a line be bored beneath Anthony Branch in Oak Ridge?

A bore can be planned beneath Anthony Branch, which runs 1.18 channel miles in Oak Ridge. The path and depth need to account for the channel, and the crossing is checked during planning for U.S. Army Corps of Engineers jurisdiction. The actual route depends on the project plans and site conditions.

Who owns electric lines in Oak Ridge and Kaufman County, and who confirms conduit specs?

Oncor Electric Delivery Company, Farmers Electric Cooperative and Trinity Valley Electric Cooperative report service in Kaufman County, but that does not show which one owns a particular line. Before planning a conduit bore near Kaufman Road, we confirm the specific line owner and its conduit requirements.

What bore sizes and lengths can you handle near Water Oak Drive in Oak Ridge?

Our range covers 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A short Water Oak Drive service and a longer crossing near Texas State Highway 34 can both be reviewed against the route, ground and installation scope.

How much Texas811 notice is needed for a bore on Kaufman Road in Oak Ridge?

The excavator needs to make the Texas811 locate request at least 48 hours before work starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If a Kaufman Road start slips more than 14 days past the original notice, make a new request. Worn or moved marks need refreshing through Texas811 before work continues.

What affects the cost of a directional bore under Texas State Highway 34 in Oak Ridge?

The route, bore length and pipe size matter, along with the clay and any weathered bedrock on the path. A Texas State Highway 34 crossing adds right of way and pavement requirements; utilities to expose, pits, concrete, drainage crossings and excavator time also shape the scope. Mobilization from Yukon is another consideration.

Where the Oak Ridge facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Oak Ridge

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Oak Ridge, Texas

Type the address of your job in Oak Ridge. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Oak Ridge

County: Cooke County directional boring. Same county: Gainesville · Lake Kiowa · Muenster · Lindsay · Valley View · Road Runner · Callisburg · Myra · Forney · Crandall · Mabank · Travis Ranch. All counties: Texas county list.