trinityboringsolutions.com

Lorenzo Texas Directional Boring: Pullman Soil, US 82 and Harrison Avenue

Quick Answer: What lies below Lorenzo? The USDA soil survey maps Pullman silty clay loam across 62 percent of the city, with clay loam common at about 40 inches and bedrock not mapped in the top five feet. We take directional boring, also called horizontal directional drilling (HDD), work in Texas, including bores beneath US 82. The Yukon main office is 331 road miles away, while Harrison Avenue gives a local street reference for planning access. That clay can grip pipe, so staged reaming and fluid control matter.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lorenzo bores at a glance

  • Incorporated city in Crosby County, Texas. Population 946 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 331 miles, about 6.4 hours of driving.
  • Ground: Pullman soil is mapped on 62 percent of the area, with clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 82, US 62, Texas State Highway 114 and FM 378. State permit office: TxDOT Lubbock District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Lorenzo, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Lorenzo and US 82?

What does the ground look like below Lorenzo? The USDA soil survey maps Pullman silty clay loam, with clay loam common at about 40 inches. The Census Bureau Vintage 2024 estimate puts Lorenzo at 946 residents in Crosby County. For a route along 1st Street or near US 82, we can bore for water, sewer, gas, electric conduit or fiber, with the route and line size guiding the setup.

Our main office is in Yukon, Oklahoma, and Lorenzo work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have focused on directional boring since 1982. More than four decades in the trade shape how we plan for the Pullman clay mapped around Lorenzo, from fluid choices to pipe pull timing.

Trinity Boring Solutions Vermeer D24x40 directional drill set up for a bore
Our Vermeer D24x40 directional drill set up for a bore. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Pullman soil mean for a bore in Lorenzo?

The USDA soil survey maps Pullman series soils across 62 percent of Lorenzo, mainly Pullman silty clay loam on 0 to 1 percent slopes. Olton soils account for 32 percent, with loam at the surface. About 40 inches down, clay loam is mapped across 95 percent of the area, and the average clay content at that depth is 39 percent. These are mapped soil patterns, not measurements from a bore along Harrison Avenue. Sticky clay can collect on a reamer and grip pipe, so the crew must manage the hole as it opens.

USDA soil survey, inside the Lorenzo city limitsWhat is mapped
Soil series mappedPullman 62 percent, Olton 32 percent and Randall 3 percent
Texture at the surfacesilty clay loam 62 percent, loam 34 percent and clay 3 percent
Texture about 40 inches downclay loam 95 percent and clay 3 percent
Engineering class about 40 inches downlean clay (CL) 97 percent and fat clay (CH) 3 percent
Average clay content about 40 inches down39 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches3 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel98 percent of the area

In Lorenzo, the soil survey does not map bedrock in the top five feet; the Blackwater Draw Formation is described as sand, silt and locally clayey material, while mapped Cenozoic sedimentary rocks are Paleocene. A seasonal water table is mapped in 3 percent of the area, so pits there may need pumping. Flood prone soils are not mapped. High steel corrosion risk covers 98 percent of the mapped area at about 40 inches, a concern for uncoated casing or tracer wire; the line owner selects any coating.

How is a bore run through Lorenzo clay loam?

Lorenzo’s clay loam can stay open but stick to the tooling or squeeze the pipe. We set the reaming sequence and fluid plan around the mapped ground, then track the head and record its depth and pitch.

  1. Pullman silty clay loam can stick to the reamer, so we use a thinner fluid mix and open the hole in stages before pulling pipe on the same workday.
  2. With heavy clay mapped at about 40 inches across much of Lorenzo, the crew watches fluid returns and avoids pressure that could lift pavement along Harrison Avenue.
  3. Before the drill nears a marked utility anywhere on a Lorenzo bore path, we hydrovac pothole it; for a route under 1st Street, that exposes the line before crossing.
  4. A walkover locator follows the drill head as it advances near US 82, while the crew logs depth and pitch to keep the planned path on course.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

Which roads can a Lorenzo bore cross near Harrison Avenue?

US 82, US 62 and Texas State Highway 114 each have 1.9 mapped roadway miles inside Lorenzo; FM 378 has 1.0. A bore beneath one of these routes needs a path planned around the highway right of way and the line being installed. Harrison Avenue is the longest named street in the city at 1.21 miles. 1st Street and 6th Street each run 1.09 miles, giving three street corridors to consider when a project route is chosen.

CrossingTypeMapped extentWho has a say
US 82US highway1.9 roadway miles insideState highway office
US 62US highway1.9 roadway miles insideState highway office
Texas State Highway 114State highway1.9 roadway miles insideState highway office
FM 378State highway1 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Lorenzo or within one mile outside its limits, so the mapped street and rail crossing count is none. No named stream, stream crossing or lake or pond is mapped inside the city or in the listed nearby area. That means a project on Harrison Avenue is not planned around a mapped track or channel crossing, though the exact bore route still determines what must be exposed and avoided.

Do I need a permit for a Lorenzo bore in Crosby County?

Lorenzo is incorporated, so its city streets, including Harrison Avenue and 1st Street, belong to the city. For work in the right of way of US 82, US 62, Texas State Highway 114 or FM 378, the utility owner applies for a TxDOT utility permit through RULIS; the TxDOT Lubbock District reviews it. Trinity supplies the bore plan and profile and works under the permit issued to the utility owner. At highway crossings, the cover depth depends on the line: electric and communication lines need 60 inches, water needs 60 inches, and pressurized sewer needs 60 inches.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Lorenzo system?

The City of Lorenzo public water system uses groundwater wells and reports 463 service connections serving 834 people. That gives a water line owner to confirm when planning a nearby service or replacement bore. Southwestern Public Service, Lighthouse Electric Cooperative and South Plains Electric Cooperative report electric service in Crosby County; the line owner must be confirmed before a conduit bore near 1st Street or another Lorenzo route.

Line ownerWhat it isSourceSize
City of LorenzoPublic water systemGroundwater wells463 connections, 834 people served
Southwestern Public Service, Lighthouse Electric Cooperative and South Plains Electric CooperativeElectric utilities reporting service in Crosby CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median Lorenzo housing year at 1968. The same estimates show 32 percent of homes built before 1960 and 7 percent built in 2000 or later. On an older block such as 1st Street, a replacement bore may follow a different route from a new service. We hydrovac pothole each marked utility on the bore path before drilling near it, since paint shows position but not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

Do you cover Lorenzo and nearby Slaton?

Lorenzo is an incorporated city in Crosby County, at an elevation of 3,168 feet and with 0.95 square miles of land. Its ZIP code is 79343. Idalou is 8.5 miles west, and Ralls is 8.7 miles east; Ransom Canyon is 12.9 miles southwest. Slaton, the nearest larger city, is 16.9 miles southwest, while Crosbyton, the county seat, is 17.3 miles east. Our Yukon, Oklahoma main office is 331 road miles away, about 6.4 hours by road, which can affect mobilization for a project near US 82.

Places near Lorenzo

What kinds of bores could come up near Lorenzo 1st Street?

  • Highway crossing: A utility bore beneath US 82 is planned for the line, cover and right of way, with the utility owner handling the permit filing.
  • Water service: A connection near the City of Lorenzo system can be bored to limit open cutting around a chosen street route.
  • Street replacement: A new sewer or water route along 1st Street can be bored around marked utilities before the pipe is pulled.
  • Fiber conduit: A conduit route near Harrison Avenue can pass beneath pavement, with the actual alignment checked against locates.
  • Electric conduit: A route near FM 378 needs the electric line owner confirmed before the bore and conduit plan are set.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Lorenzo bore near US 82?

A map pin matters near US 82 because a shift in the crossing point can change the right of way, pavement and access involved. Send the Lorenzo address or pin, what is going in the ground, pipe or conduit size and footage. A sketch or plans help us check the route, including any crossing near Harrison Avenue.

A short route through Pullman clay with clear access may be simpler to plan than a longer bore beneath US 82. Length, pipe size, soil, pavement, the number of utilities to expose and pit or excavator needs all affect the job. Creek or drainage crossings also add planning, though none are mapped inside Lorenzo. Mobilization matters too: the Yukon main office is 331 road miles away. High profile or emergency work can change the crew plan.

Questions people ask about boring in Lorenzo

Does Trinity take directional boring work in Lorenzo and Crosby County, and who staffs it?

Yes, we take directional boring work in Lorenzo, and our own crews or crews from partner drilling contractors Trinity has vetted can perform it. The Yukon office remains your contact through the bore log, including for a route in Crosby County. The exact crew setup depends on the job and location.

How do older homes near Lorenzo 1st Street affect replacement bores?

The American Community Survey 2019 to 2023 estimates put the median housing year at 1968, with 32 percent of homes built before 1960. That age can make replacement work relevant near 1st Street, but it does not establish the age or location of a buried line. We expose marked utilities before drilling across their path.

Can Lorenzo Pullman soil corrode steel, and what pipe can be used?

The USDA soil survey maps high steel corrosion risk across 98 percent of Lorenzo at about 40 inches, so uncoated steel casing or tracer wire needs consideration. HDPE does not share that soil corrosion concern. The line owner chooses any coating for steel, and the soil map is not a substitute for site testing.

What ground does a bore pass through in Lorenzo Pullman soil?

Pullman silty clay loam is the leading mapped soil series in Lorenzo, while clay loam is common at about 40 inches. Clay can cling to tooling and grip pipe, so we plan staged reaming and fluid control. The USDA survey describes mapped soil patterns, not the exact conditions at every point on Harrison Avenue.

Will a directional bore in Lorenzo hit rock?

Bedrock is not mapped in the top five feet of Lorenzo, but that does not rule out rock at greater depth. The geologic map includes the Blackwater Draw Formation, described with sand, silt and locally clayey material. A bore along US 82 still needs a site specific plan and tracking as it advances.

Who approves a bore under US 82 in Lorenzo, and which state office reviews it?

The utility that owns the line submits the TxDOT utility permit application in RULIS, and the TxDOT Lubbock District reviews it. For a crossing of US 82, TxDOT rules set cover requirements by line type, and the permit can set a different depth. Trinity provides the bore plan and profile for work under that permit.

How far is Lorenzo from Yukon, and does Slaton affect the job?

The Yukon, Oklahoma main office is 331 road miles from Lorenzo, with a listed drive time of 6.4 hours. Slaton is 16.9 miles southwest of Lorenzo and is the nearest larger city. The job location, including a route near Slaton or US 82, affects mobilization planning from Yukon.

How much Texas811 notice is needed for a bore near Lorenzo Harrison Avenue?

Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. Texas811 calls that at least two working days. For a bore near Harrison Avenue, worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of directional boring under US 82 in Lorenzo?

The job scope sets the price, with length, pipe or conduit size, Pullman clay, pavement, utilities to expose, pits and excavator time all affecting the plan. A crossing under US 82 can bring highway permit and cover requirements into the work. Mobilization from the Yukon office also matters because Lorenzo is 331 road miles away.

Where the Lorenzo facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lorenzo

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lorenzo, Texas

Type the address of your job in Lorenzo. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lorenzo

Same county: Crosbyton. All counties: Texas county list.