Directional Boring Contractors in Crosby County, TX
Trinity Boring Solutions is a directional boring contractor serving Crosby County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Ralls, Crosbyton and Lorenzo. Crosbyton, the county seat, is about 316 road miles southwest of the Trinity main office in Yukon, Oklahoma. Most Crosby County bores go under US 82 and US 62 and the White River. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Crosby County, Texas
Type the address of your job in Crosby County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Crosby County?
Crosby County covers 900 square miles, has about 5,030 residents and sits in the TxDOT Lubbock District.
| County seat | Crosbyton |
|---|---|
| Population | 5,030 (2024 Census estimate), down 1.9% since 2020 |
| Land area | 900 square miles |
| Largest cities and towns | Ralls (1,613), Crosbyton (1,465) and Lorenzo (946) |
| TxDOT district | TxDOT Lubbock District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | Southwestern Public Service, Lighthouse Electric Cooperative and South Plains Electric Cooperative |
| Interstate and US highways | US 82 and US 62 |
| State Highways | 114 and 207 |
| Rivers | White River, N Fork Dbl Mountain Fork Brazos River and Salt Fork Brazos River |
| Creeks and other streams | Crawfish Creek, Sand Creek, Pete Creek, Davidson Creek, McDonald Creek, Lake Creek, Home Creek and Turkey Creek |
| Railroads | No main line track |
| Average precipitation | 20.7 inches a year (1991 to 2020) |
| Road distance from Trinity main office | About 316 miles from Yukon, Oklahoma to Crosbyton |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Crosby County?
A bore in Crosby County most often has to cross a highway such as US 82, US 62 or State Highway 114 and a stream such as the White River, the N Fork Dbl Mountain Fork Brazos River or Crawfish Creek. State Highways 114 and 207 also run through the county. The Census map names 19 larger streams in Crosby County, led by the White River, Crawfish Creek, Sand Creek, Pete Creek, Davidson Creek and the N Fork Dbl Mountain Fork Brazos River. The rest are McDonald Creek, Salt Fork Brazos River, Lake Creek, Home Creek, Turkey Creek, Yankee Creek, Sand Rock Creek, Blue Hole Creek, Grape Creek, Plum Creek, Spring Creek, Pigpen Creek and Gannon Creek. There is no main line railroad in Crosby County.

What Is the Ground Like for Directional Boring in Crosby County?
Clay is the main thing to plan for in Crosby County: the federal soil survey records a clay rich layer in the top five feet on about 60 percent of the county and bedrock within five feet on about 9 percent. For Crosby County clay the drilling fluid is mixed to stop the cuttings from balling up behind the reamer. May is the wettest month in Crosby County at 3.0 inches on average and January the driest at 0.7. Crosby County averages 20.7 inches of precipitation a year, so the ground is usually dry at bore depth.
- Most common soils: Pullman (21%), Olton (19%) and Mansker (8%).
- Surface texture: most often loam (30%) or silty clay loam (22%).
- Bedrock within 5 feet: about 9% of the county. Most of it is soft, weathered rock.
- Clay rich layer (35% clay or more) in the top 5 feet: about 60% of the county.
- Sandy layer (70% sand or more) in the top 5 feet: about 8% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Crosby County, Texas (survey area TX107, version 22, September 3, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Crosby County?
The TxDOT Lubbock District permits bores under state highways in Crosby County, the Crosby County Commissioners Court handles county roads, and Ralls, Crosbyton and Lorenzo each handle their own streets.
- State highways. US 82, US 62, the other numbered state routes and the farm to market roads in Crosby County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Water crossings. A bore under the White River, the N Fork Dbl Mountain Fork Brazos River or Crawfish Creek is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Crosby County?
Southwestern Public Service, Lighthouse Electric Cooperative and South Plains Electric Cooperative serve Crosby County, according to 2025 filings with the U.S. Energy Information Administration. Southwestern Public Service is an investor owned utility; Lighthouse Electric Cooperative and South Plains Electric Cooperative are member owned cooperatives. Conduit bored in Crosby County is built to the standard of whichever of them owns the line. More on electric line boring for electric cooperatives.
Is Crosby County Growing?
The population of Crosby County went from 5,126 in 2020 to 5,030 in 2024, a loss of 1.9 percent. Most bore work in Crosby County is replacement and upgrade of lines already in the ground.
Which Cities and Towns in Crosby County Does Trinity Serve?
Trinity takes directional boring work in all 3 incorporated places in Crosby County and at sites outside city limits, and Ralls is the largest with about 1,613 residents.
| City or town | 2024 population |
|---|---|
| Ralls | 1,613 |
| Crosbyton | 1,465 |
| Lorenzo | 946 |
Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Crosby County.
Crosby County borders Dickens County, Floyd County, Garza County, Hale County, Kent County, Lubbock County, Lynn County and Motley County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Dickens (Dickens), Floydada (Floyd), Post (Garza), Plainview (Hale), Jayton (Kent), Lubbock (Lubbock), Tahoka (Lynn) and Matador (Motley).
Which Directional Boring Services Are Available in Crosby County?
Every Trinity service is available in Crosby County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including US 82, US 62 and the White River
- Drinkable water line boring and sewer force mains in Ralls or Crosbyton and on rural water systems
- Underground conduit in Southwestern Public Service and Lighthouse Electric Cooperative territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along US 82
- Municipal boring services for cities such as Ralls, Crosbyton and Lorenzo
The free Bore Planner sizes a Crosby County job before you call.
Crosby County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Crosbyton, Texas?
Yes. Trinity Boring Solutions takes work in Ralls, Crosbyton and Lorenzo and the rural parts of Crosby County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under US 82 in Crosby County?
The TxDOT Lubbock District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Crosby County Commissioners Court and city streets through the city.
Is there rock in Crosby County?
Not much. The federal soil survey records bedrock within five feet of the surface on about 9 percent of Crosby County. Potholing confirms it on the actual bore path.
Can a line be bored under the White River in Crosby County?
Yes. A drill is steered below the bed of the White River from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Is Trinity insured for work in Crosby County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Crosby County?
Length and pipe size put a bore in a general range. Depth, the crossings and the ground set the number, and heavy clay is a factor on many Crosby County jobs.
How Do You Get a Bore Quote in Crosby County?
Call (405) 409-7423 any time or send the address in Crosby County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.