trinityboringsolutions.com

Marathon Texas Directional Boring: Crossen Gravelly Loam, US 90 and Pena Colorado Creek

Quick Answer: Crossen gravelly loam is common around Marathon, and its gravel can push a drill head off line. We take directional boring, also called horizontal directional drilling (HDD), work in Texas for routes such as US 90. Marathon is 608 road miles from our Yukon, Oklahoma main office, with Union Pacific track also inside the community. At about 40 inches, very gravelly sandy loam is mapped under 62 percent of the area, so we check depth and pitch as the bore advances.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Marathon bores at a glance

  • Unincorporated community in Brewster County, Texas. Population 410 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 608 miles, about 12.1 hours of driving.
  • Ground: Crossen soil is mapped on 62 percent of the area, with very gravelly sandy loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 5 percent of the area.
  • Highways inside the boundary: US 90 and US 385. State permit office: TxDOT El Paso District.
  • Railroad track inside the boundary: Union Pacific, with 4 mapped street and rail crossings.
  • Named streams inside the boundary: Pena Colorado Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring near Pena Colorado Creek in Marathon?

Crossen gravelly loam is mapped across much of Marathon, where gravel can deflect a drill head. We take directional boring work in Brewster County for water, sewer, gas, electric conduit and fiber routes along places such as 1st Street and US 90. The Census Bureau counted 410 people here in the 2020 Census; that small community still has streets, tracks and drainage to plan around.

Our main office is in Yukon, Oklahoma, and Marathon work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have done directional boring since 1982; that history informs how we plan Marathon work. The 3/4 inch service line to 48 inch casing range can fit a small service near 5th Street or a larger crossing near US 90.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Crossen soil affect drilling in Marathon?

The USDA soil survey maps Crossen gravelly loam, 1 to 5 percent slopes, across 60 percent of Marathon. Gravelly loam is the main surface texture, while very gravelly sandy loam is mapped at about 40 inches under 62 percent of the area. These are mapped patterns, not test borings at a 1st Street worksite. Gravel cuts readily but can shift a drill head off line, so we check depth and pitch at each rod. Silt loam also appears across 33 percent of the mapped area and can soften steering if it gets too wet.

USDA soil survey, inside the Marathon mapped community boundaryWhat is mapped
Soil series mappedCrossen 62 percent, Stovall 25 percent, Bigetty 8 percent and Bissett 5 percent
Texture at the surfacegravelly loam 62 percent, silt loam 33 percent and very gravelly loam 5 percent
Texture about 40 inches downvery gravelly sandy loam 62 percent, silty clay 25 percent and clay loam 8 percent
Engineering class about 40 inches downclayey gravel (GC) 62 percent, fat clay (CH) 25 percent and lean clay (CL) 8 percent
Average clay content about 40 inches down25 percent
Bedrock mapped within 60 inches5 percent of the area (5 percent hard rock, 0 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel0 percent of the area

The USDA soil survey maps bedrock within 60 inches across 5 percent of Marathon; the typical mapped depth is 17 inches, so a route near Crossen ground needs site specific checking for rock. Seasonal water table is not mapped within 60 inches, while flood prone soils cover 8 percent of the area around drainage. For Marathon boring plans, high steel corrosion risk is not mapped, so we do not rely on a mapped corrosion risk. The geologic map names Older alluvial deposits of Cenozoic age, with coarse alluvium, sand and larger rock fragments that can affect steering.

What does it take to bore Marathon’s very gravelly sandy loam?

Very gravelly sandy loam is mapped under much of Marathon at about 40 inches. We plan the drill path around the local gravel, the surface route and any nearby utilities.

  1. On Crossen gravelly loam, gravel can knock the drill head off course, so we check its depth and pitch at every rod.
  2. Where very gravelly sandy loam lies below a route near Avenue D, staged reaming and a prepared pipe help manage loose gravel.
  3. For a soft silt loam stretch near 1st Street, we limit fluid pressure so wet ground does not wash out or weaken steering.
  4. Before a route near Pena Colorado Creek, we expose marked utilities and plan the profile to pass beneath the channel.
Bobcat E35 mini excavator lowering a 6 inch PVC sleeve into a bore pit in sandy soil at NE 24th Street in northeast Oklahoma City
Lowering a 6 inch PVC sleeve into a bore pit in sandy soil at NE 24th Street in Oklahoma City.

Which roads, tracks or creeks could a Marathon bore cross near US 90?

US 90 has 1.5 mapped roadway miles inside Marathon, and US 385 has 1.0. A bore beneath either highway needs a route and cover plan that fits the crossing. Among the longer named streets, 1st Street runs 1.58 miles, Avenue D runs 1.42 miles and Iron Mountain Road runs 1.22 miles inside the community. The mapped street network totals 42.58 public road centerline miles, so a job may also need to avoid pavement on a local street.

CrossingTypeMapped extentWho has a say
US 90US highway1.5 roadway miles insideState highway office
US 385US highway1 roadway miles insideState highway office
Union PacificRailroad1.65 track miles insideThe railroad
Pena Colorado CreekStream2.91 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 1.65 track miles inside Marathon on its Sanderson Subdivision, and Amtrak uses the track. Public mapping shows 4 street and rail crossings in the community, so rail clearance can shape a route. Pena Colorado Creek has 2.91 channel miles inside Marathon, with 6 mapped street crossings of named streams. A creek route needs channel planning; none of the lakes and ponds are mapped within one mile.

Who approves a Marathon bore in Brewster County?

Marathon is an unincorporated community, so it has no city government to issue street approvals; Brewster County handles county matters, while US 90 and US 385 are state highways. For a bore in highway right of way, the utility that owns the line submits the utility permit through TxDOT’s RULIS system, reviewed by the TxDOT El Paso District. Cover depth sets the profile: electric and communication lines need 60 inches at a crossing, and water lines also need 60 inches. A Union Pacific crossing requires an agreement with the railroad, which sets casing, depth and flagging. Pena Colorado Creek is checked for Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the lines serving addresses in Brewster County near Marathon?

The water provider for a specific Marathon address has to be confirmed with Brewster County, the county or the local water district before a bore is planned. EPA drinking water records do not tie a system to this community, so the provider cannot be matched from those records. AEP Texas North and Rio Grande Electric Cooperative report electric service in Brewster County; confirm the line owner for the address before planning a conduit bore.

Line ownerWhat it isSourceSize
AEP Texas North and Rio Grande Electric CooperativeElectric utilities reporting service in Brewster CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Marathon’s median housing year at 1958; 52 percent of homes were built before 1960, and 12 percent were built in 2000 or later. Older service lines near 1st Street may be replaced, while newer work may add a service. Before drilling near a marked utility, we use hydrovac potholing to expose it and check its depth; paint alone does not show depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

What is near Marathon and Alpine for a directional boring job?

Marathon is in Brewster County, with an elevation of 4,140 feet and a mapped area of 5.26 square miles. The community uses ZIP code 79842. Alpine is 27.4 miles west and is both the nearest larger place and the county seat. Marathon has US 90, US 385 and Union Pacific track within the mapped community boundary, which can shape a bore route. From our Yukon, Oklahoma main office, the drive is 608 road miles and 12.1 hours, a distance that affects mobilization for work near Pena Colorado Creek.

Places near Marathon

Which jobs call for a bore along 1st Street in Marathon?

  • Highway crossing: A bore under US 90 or US 385 needs a planned profile and highway right of way coordination.
  • Water service: A new line near 1st Street can run beneath pavement instead of opening the street surface.
  • Fiber route: Electric conduit or fiber along Avenue D can be bored below the road to keep the surface intact.
  • Creek crossing: A route beneath Pena Colorado Creek needs channel depth planning and a jurisdiction check during planning.
  • Rail crossing: A bore beneath Union Pacific track needs the railroad’s crossing agreement for casing, depth and flagging.
  • Street utility: A sewer or gas route near Iron Mountain Road can use a bore to pass below the road surface.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a Marathon bore quote near 5th Street?

For a route near 5th Street, give us the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help show whether the run approaches US 90, Union Pacific track or a marked utility. Those details let us assess the path and the access needed for the bore.

Price starts with the job’s 608 road miles from Yukon, then the Crossen gravelly loam and any rock or gravel along the route. Length and pipe size matter, as do exposed utilities, pavement and crossings such as US 90, Union Pacific track or Pena Colorado Creek. Pit work, excavator time, sand backfill and emergency or high profile work can also change the scope. A map pin and plans help us see which of those items apply.

Questions people ask about boring in Marathon

Does Trinity take directional boring jobs in Marathon, Brewster County, and how are crews assigned?

Yes. We take directional boring work in Marathon, Brewster County, and our own crews or satellite yards operated by partner contractors we have vetted can staff a job. From the first call through the bore log, you work with us on Marathon projects, whichever crew is on site. A route near US 90 still gets planned for its local crossings.

Who approves a bore under US 90 in Marathon, and which state office reviews it?

TxDOT reviews a US 90 right of way utility permit through its El Paso District. The utility owner, not the boring contractor, submits the application in RULIS; we provide the bore plan and profile and work under the owner’s permit. The proposed cover depth and route determine the plan beneath the highway.

What does a Marathon bore under Union Pacific track require?

A crossing under Union Pacific track requires an agreement with the railroad. That agreement sets casing, depth and flagging for the work. The track is part of the Sanderson Subdivision in Marathon, and a bore near a mapped street and rail crossing needs a route that fits those railroad conditions.

Can a line be bored under Pena Colorado Creek in Marathon?

A line can be planned beneath Pena Colorado Creek, subject to the site conditions and the required crossing review. The creek has 2.91 channel miles inside Marathon, and planning checks whether the U.S. Army Corps of Engineers has jurisdiction. We would plan the bore depth to pass beneath the channel.

Which electric company serves my Marathon address in Brewster County, and who confirms conduit specs?

AEP Texas North and Rio Grande Electric Cooperative report electric service in Brewster County, but that does not identify the provider at every Marathon address. Confirm the line owner and conduit requirements for the specific route before planning a bore. This matters for a proposed conduit run near US 385 as well as a local street.

Who is in charge of Iron Mountain Road in Marathon, and does a bore require cutting it?

Marathon is unincorporated and has no city government, so its streets are not under a city government. Ask Brewster County about a local street route such as Iron Mountain Road. Directional boring can pass beneath pavement without opening the street across the bore path, with pits placed in dirt on each side.

How much notice does Texas811 need for a Marathon bore near 1st Street, and what if marks move?

Texas811 needs a locate request at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before work. If a 1st Street start moves more than 14 days past the original notice, submit a new notice. Before work continues in Marathon, we arrange for worn or moved marks to be refreshed.

How far is Marathon from Trinity’s Yukon office, and does Alpine change the job plan?

Marathon is 608 road miles and 12.1 drive hours from our Yukon, Oklahoma main office, so distance can affect mobilization. Alpine is 27.4 miles west and is the county seat, but the actual route near Marathon matters most. A job by Pena Colorado Creek may have different access and crossing needs than one by US 90.

What affects the cost of a directional bore under US 90 in Marathon?

The job scope sets the price, including bore length, pipe or conduit size, soil and rock, utility exposure, pavement and crossing conditions. A US 90 route may require highway permit coordination and added cover planning, while Marathon’s Crossen gravelly loam can affect drilling time. The distance from Yukon and any creek, track, pit or emergency work also matter.

Where the Marathon facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Marathon

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Marathon, Texas

Type the address of your job in Marathon. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Marathon

Same county: Study Butte · Terlingua. All counties: Texas county list.