Study Butte Texas Directional Boring: Geefour Soil, Bens Hole Creek and FM 170
Quick Answer: Terlingua Springs Road and Road Runner Circle rank among Study Butte’s longest streets, while Texas State Highway 118 and FM 170 carry routes through the community. We bore beneath roads and crossings such as Bens Hole Creek using directional boring, also called horizontal directional drilling (HDD). The mapped network has 25.75 public road miles, and the Yukon office is 669 road miles away. Geefour soil and silty clay call for controlled reaming.
Study Butte bores at a glance
- Unincorporated community in Brewster County, Texas. Population 200 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 669 miles, about 14 hours of driving.
- Ground: Geefour soil is mapped on 32 percent of the area, with silty clay about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 63 percent of the area.
- Highways inside the boundary: Texas State Highway 118 and FM 170. State permit office: TxDOT El Paso District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Bens Hole Creek, Terlingua Creek and Dark Canyon Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Terlingua Springs Road in Study Butte?
Study Butte is an unincorporated community in Brewster County; the Census Bureau counted 200 people in the 2020 Census, the latest population figure available for this place. We install water, sewer, gas, electric conduit and fiber along streets such as Terlingua Springs Road and Lois Lane, using a bore to pass beneath driveways or road surfaces without opening a trench across them.
Our main office is in Yukon, Oklahoma, and Study Butte work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Since 1982, four decades of directional boring have shaped how we assess the silty clay and bedrock mapped around Study Butte; our family business began in 1965, and that experience means we plan for changing ground rather than assuming Terlingua Springs Road has one uniform profile.

What kind of ground does Study Butte have around Geefour soil?
The USDA soil survey maps Geefour soil across 32 percent of Study Butte, with Ninepoint at 21 percent and Mariscal at 15 percent. About 40 inches below the surface, 53 percent of the mapped area is silty clay, and the average clay content there is 38 percent. Sandy material is mapped in 5 percent of the area at that depth. Silty clay can hold a bore open but gets sticky on the reamer and may grip pipe, so a bore near Terlingua Springs Road needs staged reaming and a timely pull.
| USDA soil survey, inside the Study Butte mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Geefour 32 percent, Ninepoint 21 percent, Mariscal 15 percent, Studybutte 10 percent and Riverwash (miscellaneous area) 7 percent |
| Texture at the surface | very gravelly silty clay 32 percent, silty clay loam 21 percent and extremely channery loam 15 percent |
| Texture about 40 inches down | silty clay 53 percent, bedrock 31 percent and very gravelly variable 7 percent |
| Engineering class about 40 inches down | fat clay (CH) 53 percent, graded gravel (GW) 7 percent and clean gravel (GP) 5 percent |
| Average clay content about 40 inches down | 38 percent |
| Bedrock mapped within 60 inches | 63 percent of the area (15 percent hard rock, 48 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 8 percent of the area |
| High corrosion risk for uncoated steel | 58 percent of the area |
The USDA soil survey maps bedrock within 40 inches across 63 percent of Study Butte, with typical depth listed as 7 inches; some is weathered and some hard, so the drilling tool may need to change. No seasonal water table is mapped within 60 inches, while flood prone soils cover 8 percent of the area, a concern to check near Bens Hole Creek. High steel corrosion risk is mapped across 58 percent. The geologic map identifies Cenozoic alluvial fan deposits and Late Cretaceous sedimentary rock, which can mean changing conditions along a bore.
What does it take to bore Study Butte’s silty clay?
Study Butte’s silty clay and shallow mapped bedrock call for careful fluid control and steady checks on the drill path. Along Bens Hole Creek, the crossing plan also has to account for the channel and its banks.
- We expose each marked utility near a Lois Lane bore with hydrovac potholing; paint shows its position, not its depth.
- In the silty clay mapped beneath Study Butte, we use controlled fluid and staged reaming to limit sticky buildup on the reamer.
- With bedrock mapped within 40 inches across much of the area, we check how the ground changes and select a suitable drilling tool.
- Near Bens Hole Creek, we track the drill head from the surface and log depth and pitch while keeping the bore beneath the channel.

What does a bore have to cross in Study Butte near Bens Hole Creek?
Texas State Highway 118 has 3.6 mapped roadway miles inside the Study Butte community boundary, and FM 170 has 4.3. Terlingua Springs Road is the longest named street at 1.58 miles, followed by Road Runner Circle at 1.29 miles and Lois Lane at 0.98 miles. With 25.75 public road centerline miles in the community, a route may meet several road surfaces or driveways. Boring can pass beneath pavement rather than cutting across it, subject to the applicable road approval.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 118 | State highway | 3.6 roadway miles inside | State highway office |
| FM 170 | State highway | 4.3 roadway miles inside | State highway office |
| Bens Hole Creek | Stream | 4.18 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Terlingua Creek | Stream | 2.72 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Dark Canyon Creek | Stream | 1.32 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Rough Run | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside the Study Butte community or within one mile outside it. Bens Hole Creek has 4.18 channel miles inside the boundary, while Terlingua Creek has 2.72 and Dark Canyon Creek has 1.32. Public records map 13 street crossings of named streams in the community, so a route near a creek needs a site specific crossing plan. No lakes or ponds are mapped within one mile.
Whose permission does a Study Butte bore need in Brewster County?
Study Butte has no city government, so street and permit authority rests with Brewster County or the state, depending on the road. Work within the right of way of Texas State Highway 118 or FM 170 needs a TxDOT utility permit reviewed by the TxDOT El Paso District. The utility owner, not the drilling contractor, submits the application through TxDOT’s RULIS system; we provide the bore plan and profile and work under the utility owner’s permit. Cover depends on the line: electric and communication crossings need 60 inches below the lowest crossed grade, water crossings need 60 inches, and pressurized sewer crossings need 60 inches. A Bens Hole Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines are already buried in Study Butte, Brewster County?
The water provider for a specific Study Butte address has to be confirmed with the county or the local water district before a bore is planned. EPA drinking water records do not tie water systems to towns here, so the provider cannot be matched to the community. For electric service in Brewster County, AEP Texas North and Rio Grande Electric Cooperative report service; the owner of the line at the bore location must be confirmed before conduit specifications are set.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas North and Rio Grande Electric Cooperative | Electric utilities reporting service in Brewster County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Study Butte’s median housing year at 1990; 27 percent of housing was built before 1960, 44 percent from 1960 to 1999, and 29 percent in 2000 or later. Those figures do not date buried lines, but they help frame whether a project may replace older service or add a new one near Lois Lane. Before drilling near marked water or electric lines, we hydrovac pothole to expose them because surface marks do not show depth.

How far is Study Butte from Redford and the Yukon yard?
Study Butte is an unincorporated community in Brewster County, covering 4.76 square miles at an elevation of 2,580 feet. The ZIP code is 79852. Terlingua is 4.2 miles southwest, and Redford is 38.8 miles west; Alpine, the county seat, is 71.4 miles north. The Yukon, Oklahoma yard is 669 road miles away, a 14.0 hour drive. That distance is part of planning a bore along Texas State Highway 118, especially when equipment and crews must be mobilized for a project.
Places near Study Butte
- Directional boring in Terlingua: 4.2 miles southwest
- Directional boring in Redford: 38.8 miles west
What boring work comes up near Road Runner Circle in Study Butte?
- Highway crossing: A bore beneath Texas State Highway 118 keeps the pavement intact and follows the cover and permit plan for the line.
- Water service: A service bore near Lois Lane needs the address specific water provider confirmed before the route and connection are planned.
- Fiber conduit: A conduit route along Terlingua Springs Road can pass beneath driveways without cutting across each paved entrance.
- Creek crossing: A route beneath Bens Hole Creek needs a planned depth and a check for U.S. Army Corps of Engineers jurisdiction.
- Electric conduit: Near Road Runner Circle, we confirm the electric line owner before setting conduit specifications or drilling across marked utilities.
- FM road crossing: A bore beneath FM 170 needs a TxDOT utility permit for work in the state road right of way.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Study Butte work near Texas State Highway 118?
A map pin matters near Texas State Highway 118 because the exact side of the road or distance from Bens Hole Creek can change the route and access. Send the address or pin, what will go underground, the pipe or conduit size, and the footage. A sketch or plans help us check the crossings and ground conditions.
Price follows the scope: Geefour silty clay, shallow mapped bedrock and other ground conditions affect drilling time and tooling. Crossings also matter, including pavement on Texas State Highway 118, creek or drainage routes, and utilities that must be exposed. Pit size, excavator time, sand backfill, pipe size and bore length add to the work plan. Study Butte is 669 road miles from Yukon, so mobilization is another project factor.
Questions people ask about boring in Study Butte
Does Trinity take directional boring jobs in Brewster County near Study Butte?
Yes, Trinity takes directional boring work in Brewster County, including Study Butte. Our own crews and vetted partner drilling contractors working from satellite yards can staff the job, while customers continue dealing with Trinity from the first call through the bore log. A map pin near Terlingua Springs Road helps us review the location.
Who approves a bore under Texas State Highway 118 in Study Butte?
TxDOT reviews the utility permit through its El Paso District for work in the Texas State Highway 118 right of way. The utility that owns the line submits the application in RULIS, and we provide the bore plan and profile. The permit sets project requirements, including cover under the crossed grade.
Can a line be bored under Bens Hole Creek in Study Butte?
A bore can be planned beneath Bens Hole Creek, but the site conditions and route have to be reviewed first. The creek has 4.18 channel miles inside the community, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. The crossing plan sets the bore path and depth.
Who owns electric lines in Brewster County near Study Butte, and who confirms conduit specs?
AEP Texas North and Rio Grande Electric Cooperative report electric service in Brewster County, but that does not establish which one serves a specific Study Butte address. Confirm the line owner at the location before setting conduit specifications. Along Road Runner Circle, marked utilities need exposure before drilling near them.
Who is in charge of Lois Lane in Study Butte, and does it need to be cut?
Study Butte is unincorporated and has no city government, so responsibility for streets rests with the county or state according to the road. Lois Lane is a named community street. A directional bore can pass beneath a road or driveway without cutting across the surface, subject to the applicable approval.
Do the homes and buried lines near Road Runner Circle in Study Butte tend to be old?
The American Community Survey 2019 to 2023 estimates give Study Butte a median housing year of 1990, with 27 percent of homes built before 1960. Housing age does not confirm the age of a buried line. For a replacement bore near Road Runner Circle, we expose marked utilities to check their actual position and depth.
Can I call Trinity after hours about an urgent bore near Lois Lane in Study Butte?
Yes, a person answers Trinity’s phone 24 hours a day, and the company offers emergency response. For an urgent job near Lois Lane, tell us the location and what line needs work so we can understand the scope. Emergency timing and site access affect how the work is planned.
How far ahead should I call Texas811 for a bore near Terlingua Springs Road in Study Butte?
Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If work near Terlingua Springs Road slips more than 14 days past the original notice, submit a new request. Have worn or moved marks refreshed before work continues.
What affects the cost of a directional bore under Texas State Highway 118 in Study Butte?
The scope drives the price: bore length and pipe size, silty clay or bedrock, exposed utilities, pavement, creek crossings, pits and equipment time all matter. A Texas State Highway 118 crossing also has permit and cover requirements to plan around. Mobilization matters too, because Study Butte is 669 road miles from Yukon.
Where the Study Butte facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Study Butte
- U.S. Census Bureau, TIGER/Line 2024: Study Butte boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Study Butte population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Study Butte housing units and year built
- Macrostrat geologic map compilation: map units under Study Butte
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Brewster County
- U.S. Geological Survey, Elevation Point Query Service: Study Butte elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Study Butte
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Study Butte
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Study Butte, Texas
Type the address of your job in Study Butte. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Study Butte
Same county: Alpine · Marathon. All counties: Texas county list.
