trinityboringsolutions.com

Terlingua Texas Directional Boring: Geefour Silty Clay, FM 170, Terlingua Creek

Quick Answer: On Terlingua’s FM 170, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for utility routes without cutting the roadway. Terlingua is 677 road miles from our Yukon, Oklahoma main office, so our own crews and vetted partner contractor satellite yards staff work along Joe Moss Road. Geefour silty clays and silty clay at about 40 inches can cling to tooling and pipe, so we manage fluid and ream in stages. Gravelly ground in the Terlingua area can also shift the drill head, so we check its path as the bore advances.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Terlingua bores at a glance

  • Unincorporated community in Brewster County, Texas. Population 78 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 677 miles, about 14.4 hours of driving.
  • Ground: Geefour soil is mapped on 35 percent of the area, with silty clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 52 percent of the area.
  • Highways inside the boundary: FM 170. State permit office: TxDOT El Paso District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Terlingua Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring on Joe Moss Road in Terlingua?

Terlingua is an unincorporated community in Brewster County, where the 2020 Census counted 78 people; the Census Bureau does not publish yearly estimates for unincorporated places. Along Joe Moss Road or FM 170, we bore routes for water, sewer, gas, electric conduit and fiber. The line type and access setting shape the plan.

Our main office is in Yukon, Oklahoma, and Terlingua work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our range runs from a 3/4 inch service line near Joe Moss Road to 48 inch casing for a larger crossing. Trinity is a family business that started in 1965, and we have done directional boring since 1982. The customer works with us from the first call through the bore log.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What ground does a bore meet in Terlingua’s Geefour soil?

The USDA soil survey maps Geefour as the leading soil series in Terlingua, covering 35% of the area. It maps Geefour silty clays complex on slopes of 10 to 45 percent across 24%, with another Geefour complex mapped across 11%. At about 40 inches below the surface, silty clay is mapped under 52% of the area, and the average clay content at that depth is 34%. Very gravelly silty clay is a common surface texture, while sandy or gravelly material also appears below. These are mapped patterns, not test borings, so the route still needs field checks.

USDA soil survey, inside the Terlingua mapped community boundaryWhat is mapped
Soil series mappedGeefour 35 percent, Ninepoint 17 percent, Strawhouse 14 percent, Rock outcrop (miscellaneous area) 13 percent and Mariscal 10 percent
Texture at the surfacevery gravelly silty clay 35 percent, silty clay loam 17 percent and very gravelly loam 14 percent
Texture about 40 inches downsilty clay 52 percent, bedrock 17 percent and very gravelly coarse sandy loam 14 percent
Engineering class about 40 inches downfat clay (CH) 52 percent, clayey gravel (GC) 14 percent and clean gravel (GP) 9 percent
Average clay content about 40 inches down34 percent
Bedrock mapped within 60 inches52 percent of the area (7 percent hard rock, 45 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel61 percent of the area

The USDA soil survey maps bedrock within 60 inches across 52% of Terlingua, including 7% hard bedrock and 45% weathered bedrock. That range can mean a slower cut or a change in tooling where the bore meets rock. No seasonal water table is mapped within 60 inches, while flood prone soils cover 3%, so creek routes still need care. High steel corrosion risk is mapped across 61%, which makes the line owner’s casing and tracer wire choices relevant; HDPE avoids that steel corrosion concern. Older alluvial deposits of Pleistocene age include gravel, cobbles and boulders, which can push a drill head off line.

How do we bore Terlingua’s silty clay where the Geefour soil series is mapped?

Terlingua’s silty clay and gravel mix calls for a controlled fluid plan, staged reaming and steady steering checks. We set pits on dirt where the route allows.

  1. On Geefour silty clays, keep drilling fluid controlled and ream in stages; sticky material can build on the reamer and grip pipe if the hole sits open.
  2. Where the survey maps gravelly ground in Terlingua, open the hole in stages and keep pipe ready, since loose gravel can fall in behind the drill head.
  3. With weathered bedrock mapped in Terlingua, slow the cut and check steering at soil to rock changes; harder rock needs a more suitable drilling tool.
  4. Near Terlingua Creek or a marked service on Joe Moss Road, daylight each marked line with hydrovac first and log the tracked head’s depth and pitch.
Vermeer D24x40 S3 Navigator and water truck at the entry of a 385 foot sandstone rock bore above the wetland in Guthrie, Oklahoma
Our Vermeer D24x40 and water truck at the entry of a 385 foot sandstone rock bore in Guthrie, Oklahoma.

Which roads, tracks or creeks can a Terlingua bore cross near FM 170?

FM 170 accounts for 6.2 mapped roadway miles inside Terlingua’s community boundary. Texas State Highway 118 is 1.3 miles outside that boundary. Joe Moss Road runs 2.46 miles inside the community, Fulcher Road runs 2.25 miles, and Southeast Longdraw runs 1.79 miles. A bore route may follow these roads or cross beneath them, depending on the address and existing lines. Keeping the drill underground can avoid cutting pavement or driveways, with entry and exit pits placed in dirt where access allows.

CrossingTypeMapped extentWho has a say
FM 170State highway6.2 roadway miles insideState highway office
Texas State Highway 118Highway nearby1.3 miles outsideState highway office
Terlingua CreekStream1.01 channel miles insideChecked for Corps of Engineers jurisdiction
Willow CreekStream nearbyAlong the boundaryChecked for Corps of Engineers jurisdiction
Dawson CreekStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Rough RunStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Dark Canyon CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Terlingua or within one mile outside the community, and no street and rail crossings are mapped there. Terlingua Creek has 1.01 channel miles inside the community, but no street crossings of named streams are mapped inside it. Willow Creek runs along or touches the boundary, with other creeks nearby. Along FM 170, we account for no lakes or ponds being mapped within one mile when planning a boring route. A route near Terlingua Creek still needs a careful depth plan and a check for federal waterway jurisdiction during planning.

Who signs off on a Terlingua bore in Brewster County?

Terlingua is an unincorporated community, so it has no city government; work on a local street is handled through the county or state, depending on the road. For a bore in FM 170’s right of way, the line owner, not the driller, submits the utility permit through TxDOT’s RULIS system. TxDOT’s El Paso District reviews it, and we provide the bore plan and profile for the owner’s filing. TxDOT cover rules call for 60 inches at highway crossings for electric and communication lines and water lines, and 60 inches for pressurized sewer. A creek route near Terlingua Creek is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Brewster County near Terlingua?

EPA drinking water records do not tie a public water system to Terlingua, so the provider for a specific address must be confirmed with the county or local water district before a bore is planned. For an electric conduit route near FM 170, AEP Texas North and Rio Grande Electric Cooperative are the utilities reporting service in Brewster County. We confirm the line owner for the address before planning the conduit bore. Hydrovac potholing helps expose marked water and electric lines before the drill approaches them.

Line ownerWhat it isSourceSize
AEP Texas North and Rio Grande Electric CooperativeElectric utilities reporting service in Brewster CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

In Brewster County, Terlingua’s median housing year is 1977, and we consider that age context when planning underground work. The estimates show 10% of homes built before 1960, 82% from 1960 to 1999, and 8% from 2000 onward. Those ages can point to replacement work, but they do not date buried lines along Fulcher Road or elsewhere. We expose each marked utility with hydrovac before drilling near it, since locate paint shows a line’s position, not its depth.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

How far is Terlingua from Study Butte and our Yukon yard?

Terlingua is in Brewster County, covers 11.02 square miles and sits at an elevation of 2,579 feet. Its ZIP code is 79852. Study Butte is 4.2 miles northeast, and Redford is 37.2 miles west. Alpine, the county seat, is 74.6 miles north. The mapped community includes FM 170 and streets such as Joe Moss Road. From our Yukon, Oklahoma main office, the trip is 677 road miles and 14.4 drive hours, which makes mobilization part of planning a Terlingua bore.

Places near Terlingua

Which jobs call for a bore near Terlingua’s Fulcher Road?

  • Highway crossing: A bore beneath FM 170 can keep the roadway intact, with the plan and profile prepared for the utility owner’s TxDOT permit.
  • Water service: A service route near Joe Moss Road needs the address specific water provider confirmed before we set the bore path.
  • Fiber drop: A fiber conduit along Fulcher Road can be installed underground, with marked utilities exposed before the drill approaches them.
  • Creek crossing: A route near Terlingua Creek needs depth planning and a check for U.S. Army Corps of Engineers jurisdiction during planning.
  • Electric conduit: Near Southeast Longdraw, the line owner must be confirmed because AEP Texas North and Rio Grande Electric Cooperative report service in Brewster County.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Terlingua bore near Barnsville Road?

For a route along Barnsville Road, send the address or map pin, what is going in the ground, and the pipe or conduit size and footage. A sketch or plans help show where the bore starts and ends. For an FM 170 crossing, include the highway location and any known pavement or creek constraints so we can scope access and the route.

The price follows the job scope. Geefour silty clay and gravelly ground affect drilling time and tooling, while a crossing at FM 170 adds highway planning. A route near Terlingua Creek can add depth and jurisdiction checks. Length, pipe size, marked utilities to expose, pavement, pits, excavator time and sand backfill also matter. Mobilization is part of the estimate because Terlingua is 677 road miles from Yukon. For FM 170 work, we plan around the TxDOT El Paso District permit office, since high profile or emergency work can change the scope.

Questions people ask about boring in Terlingua

Does Trinity Boring Solutions take directional boring work in Terlingua and Brewster County?

Yes. We take Terlingua work with our own crews and with partner drilling contractors whose satellite yards we have vetted. Our Yukon, Oklahoma main office stays the point of contact from the first call through the bore log. That works for routes along FM 170 as well as smaller service bores on local roads.

Do older homes near Terlingua’s Fulcher Road mean replacement bores?

They can mean a replacement project is worth scoping, but housing age does not establish the age or location of a buried line. The American Community Survey 2019 to 2023 five year estimates put the median housing year at 1977. For a Fulcher Road bore, we expose marked utilities before drilling near them.

Does Terlingua’s Geefour soil corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 61% of Terlingua. HDPE avoids that steel corrosion concern, while the line owner selects any coating for steel casing or tracer wire. Geefour soil is part of the local ground picture, but the owner should choose materials for the specific line and route.

What ground will a directional bore pass through in Terlingua’s Geefour soil?

The USDA soil survey maps Geefour across 35% of Terlingua, and silty clay under 52% of the area at about 40 inches. Clay can stick to the reamer and grip pipe, so we use controlled fluid and staged reaming. Gravelly ground in the mapped area can also cave behind the drill head.

Is there rock in Terlingua, and how much bedrock is mapped within five feet?

The USDA soil survey maps bedrock within 60 inches across 52% of Terlingua. Of that mapped area, 7% is hard bedrock and 45% is weathered bedrock. A bore may slow or need a different tool where rock meets soil, and the map is not a test of a particular address.

Who approves a Terlingua bore under FM 170, and which TxDOT office reviews it?

For work in FM 170’s right of way, the utility line owner submits the permit in TxDOT’s RULIS system, not the drilling contractor. TxDOT’s El Paso District reviews the filing. We provide the bore plan and profile for that owner, and the permit sets the approved route and conditions.

Can I reach Trinity after hours about an urgent Terlingua bore near Southeast Longdraw?

Yes. A person answers our phone at (405) 409-7423 24 hours a day for urgent work near Southeast Longdraw or elsewhere in Terlingua. Tell us the location and what line needs attention. The address helps us understand access and whether the route is near a road or Terlingua Creek.

How early should I call Texas811 for a Terlingua bore along Joe Moss Road?

The excavator makes the Texas811 request for a Joe Moss Road bore at least 48 hours before digging, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the notice, make a new request. Before we continue work along Fulcher Road, we refresh worn or moved marks through Texas811.

What affects the cost of a Terlingua directional bore near FM 170?

The scope sets the price, with no single factor deciding it. Geefour clay and gravelly ground affect the drilling plan, while FM 170 can add highway permit work. Length, pipe size, utilities to expose, pavement, pits and creek crossings also matter. Terlingua’s 677 road miles from Yukon affect mobilization.

Where the Terlingua facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Terlingua

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Terlingua, Texas

Type the address of your job in Terlingua. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Terlingua

Same county: Alpine · Marathon. All counties: Texas county list.