trinityboringsolutions.com

Midfield Texas Directional Boring: Edna Loam, Wallace Creek and State Highway 71

Quick Answer: Midfield is an unincorporated community, so roads such as 5th Street are county or state roads rather than city streets. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), work in Midfield for routes beneath Texas State Highway 71 and 6th Street. The Yukon main office is 505 road miles away, a factor when planning work by Wallace Creek, 0.4 miles beyond the mapped community boundary. Edna loam covers 94 percent of the mapped area, while clay at about 40 inches can stick to reamers and grip pipe.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Midfield bores at a glance

  • Unincorporated community in Matagorda County, Texas. Population 356 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 505 miles, about 10.2 hours of driving.
  • Ground: Edna soil is mapped on 94 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 71 and Texas State Highway 111. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Midfield Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles Midfield bores near Wallace Creek?

Trinity Boring Solutions handles directional boring in Midfield, an unincorporated community in Matagorda County where the county or state owns streets such as 5th Street. The Census Bureau counted 356 people in 2020; along 4th Street or Texas State Highway 111, our crews can install water, sewer, gas, electric conduit and fiber lines.

Our main office is in Yukon, Oklahoma, and Midfield work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore is roughly 4,100 feet with 48 inch pipe beneath the Arkansas River in Tulsa; a Midfield route along 5th Street is planned around its own service or conduit needs. We are a family business started in 1965, with directional boring work since 1982, for scopes such as crossings of Texas State Highway 71.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What is Edna soil like to bore in Midfield?

The USDA soil survey maps Edna soil across 94 percent of Midfield, mostly as Edna loam on 0 to 1 percent slopes; Dacosta sandy clay loam accounts for 5 percent. Surface texture is mapped as loam across 95 percent, but the deeper layer changes: at about 40 inches, clay is mapped across 99 percent of the area, with average clay content of 41 percent. That heavy clay can cling to the reamer and grip pipe, so the mapped pattern helps shape the plan but does not replace a site check along 6th Street.

USDA soil survey, inside the Midfield mapped community boundaryWhat is mapped
Soil series mappedEdna 94 percent and Dacosta 5 percent
Texture at the surfaceloam 95 percent and sandy clay loam 5 percent
Texture about 40 inches downclay 99 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches94 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel99 percent of the area

The USDA soil survey does not map bedrock within 60 inches, though that does not rule out deeper rock near Texas State Highway 71. A seasonal water table is mapped within 60 inches across 94 percent of the area, so pits near 5th Street may need pumping. Flood prone soils are not mapped in Midfield, so we account for Edna soils when planning a bore. High steel corrosion risk covers 99 percent of the mapped area, a reason for the line owner to consider casing and tracer wire materials. The Pleistocene Beaumont Formation, areas predominantly sand, includes interbedded sand, silt and clay, so conditions can vary along a bore.

How do crews handle clay in Midfield?

Edna soil gives Midfield a loam surface and heavy clay below, so our crews manage sticky cuttings and keep fluid pressure controlled near 5th Street pavement.

  1. We use a thinner drilling fluid with polymer in Edna clay, then open the hole in stages so sticky cuttings do not build up on the reamer.
  2. With heavy clay mapped at about 40 inches, crews watch fluid returns near 5th Street pavement to keep pressure from lifting the surface.
  3. Because a seasonal water table is mapped within 60 inches across 94 percent of the area, we keep pits small and pump water where needed.
  4. Before drilling near Texas State Highway 71 or 6th Street, we hydrovac marked utilities; a walkover locator tracks the head and logs depth and pitch.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

Where does a line have to go under Texas State Highway 71 in Midfield?

Texas State Highway 71 and Texas State Highway 111 run inside the mapped Midfield community boundary, with 0.8 mapped roadway miles of the former and 0.6 of the latter. A crossing beneath existing highway pavement is bored or tunneled rather than opened by trench. The longer named streets include 6th Street at 0.65 miles, 4th Street at 0.58 miles and 5th Street at 0.58 miles. Those routes help define where a service line or conduit can reach a property without cutting its street surface.

CrossingTypeMapped extentWho has a say
Texas State Highway 71State highway0.8 roadway miles insideState highway office
Texas State Highway 111State highway0.6 roadway miles insideState highway office
Wallace CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Railroads are not mapped inside Midfield or within 1 mile outside the community boundary, so the public mapping shows no local track route to plan around. Wallace Creek lies 0.4 miles outside the boundary; no crossings of a named stream by mapped streets are shown inside the community. Unnamed drainage totals 0.48 miles within the area, which can affect a route even where no named creek crossing is mapped. No lakes or ponds are mapped within 1 mile of Midfield; we assess Wallace Creek when planning a bore.

Whose permission does a Midfield bore need in Matagorda County?

Midfield has no city government, so 5th Street and other local roads are under county or state authority, while Texas State Highway 71 and Texas State Highway 111 are state routes. Work in either highway right of way needs a TxDOT utility permit reviewed by the Yoakum District. The utility that owns the line files through TxDOT’s RULIS system; we prepare the bore plan and profile and work under that owner’s permit. A highway crossing also needs the cover depth set by TxDOT rules and the permit. If a route reaches Wallace Creek, planning includes checking whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns the Midfield Water Supply Corporation lines in Midfield?

Midfield Water Supply Corporation is the local government owned public water system, using groundwater wells and serving 426 people through 142 service connections. That gives a water route along 6th Street a known local system to coordinate with, though the line owner and exact connection still need confirmation. Utilities reporting electric service in Matagorda County include AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative. We confirm the electric line owner for the address before planning a conduit bore.

Line ownerWhat it isSourceSize
Midfield Water Supply CorporationPublic water systemGroundwater wells142 connections, 426 people served
AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric CooperativeElectric utilities reporting service in Matagorda CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing figures are not published for a place this small, so a proposed replacement near 5th Street cannot be classified by age from a reliable local housing survey. New services and existing lines both call for checking the actual route. Matagorda County averages 45.4 inches of precipitation a year; September averages 5.6 inches and February 2.4 inches. That wet season pattern and the Midfield Water Supply Corporation network make locating and potholing marked lines important before the drill approaches them.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

How far is Midfield from Blessing and our Yukon office?

Midfield is in Matagorda County, at 47 feet elevation, and covers 0.46 square miles in the Census Bureau’s mapped community boundary. Its ZIP code is 77458. Blessing is 4.5 miles south; Markham is 9.2 miles east; Bay City, the county seat and nearest larger city, is 15.6 miles east. Palacios is 15.7 miles south and La Ward is 16.5 miles southwest. The Yukon yard is 505 road miles away, a 10.2 hour drive, which affects mobilization for a job near Texas State Highway 71.

Places near Midfield

What could crews bore along 5th Street in Midfield?

  • Highway crossing: A bore beneath Texas State Highway 71 keeps the existing pavement intact and follows the cover requirements in the TxDOT permit.
  • Water service: A connection near 6th Street can tie into the Midfield Water Supply Corporation system after the line owner and route are confirmed.
  • Fiber conduit: A route along 5th Street can carry communications conduit beneath the road surface, with marked utilities exposed before drilling nearby.
  • Drainage crossing: A route near Wallace Creek needs planning for the channel and a check of U.S. Army Corps of Engineers jurisdiction.
  • Street service: A bore along 4th Street can place water, sewer or conduit without opening a trench across the roadway.
  • State route conduit: A conduit crossing Texas State Highway 111 needs the utility owner’s TxDOT permit and a bore plan for the Yoakum District.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Midfield bore near 6th Street?

For a Midfield quote near 6th Street, send the address or map pin, what will go underground, the pipe or conduit size and the footage; a sketch or plans help us place the route. The 0.65 mile street and nearby 5th Street give useful reference points, but the entry and exit pits and any marked utilities can change the work plan.

Price depends on the route and the work it takes to build it. Edna clay can affect drilling fluid, reaming and pipe pullback. Crossings and exposures matter too: Texas State Highway 71, concrete or pavement, drainage and marked utilities can add steps. The pit locations, excavator time and sand backfill also shape the scope. Midfield is 505 road miles from Yukon, so mobilization is part of planning; high profile or emergency work can require additional coordination.

Questions people ask about boring in Midfield

Does Trinity take directional boring jobs in Midfield and Matagorda County?

Yes. We take directional boring work in Midfield and across Texas, planning around Texas State Highway 71 when a crossing is required. Our main office is in Yukon, and Midfield jobs use our own crews or crews from vetted partner drilling contractors based at satellite yards. You deal with Trinity from the first call through the bore log, including a route near 5th Street.

Who runs the Midfield public water system in Matagorda County, and where does its water come from for bore planning?

Midfield Water Supply Corporation runs the public water system, and its source is groundwater wells. Public records list 142 service connections serving 426 people. For work along 6th Street, the proposed connection still needs to be matched to the water system’s actual line and route.

Which electric line owner should I check in Midfield and Matagorda County before a conduit bore?

AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative report electric service in Matagorda County. That list does not identify the provider at every Midfield address. Confirm the line owner for the 5th Street route before setting conduit specifications or a bore path.

Who is in charge of Midfield streets such as 5th Street, and can a bore avoid cutting them?

Midfield is an unincorporated community without a city government, so its streets are under county or state authority. A bore along 5th Street can pass beneath the road rather than cut through its surface. The road owner and any state highway right of way still determine the applicable permit process.

Could groundwater or flood prone ground affect bore pits near Wallace Creek in Midfield?

Yes, seasonal groundwater can affect pits: the soil survey maps a seasonal water table within 60 inches across 94 percent of Midfield. Flood prone soils are not mapped, but Wallace Creek is 0.4 miles outside the mapped community boundary. Small pits and pumping may be needed where groundwater collects.

Does Edna soil in Midfield corrode steel, and what pipe should I use?

The USDA soil survey maps high steel corrosion risk across 99 percent of Midfield, including areas mapped as Edna soil. The line owner should choose suitable coatings for steel casing or tracer wire. HDPE is not affected by this soil corrosion concern, but pipe selection depends on the utility’s requirements and project design.

How early should I call Texas811 for a Midfield bore on 6th Street, and what if marks move?

For a bore on 6th Street, Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If the start slips more than 14 days past the original notice, we submit a new request through TxDOT Yoakum District. Before work continues in Midfield, we have worn or moved marks refreshed through Texas811 for routes near Texas State Highway 111.

How far is Midfield from Bay City and Trinity’s Yukon main office, and does distance matter?

Midfield is 15.6 miles west of Bay City and 505 road miles from our Yukon main office, a 10.2 hour drive. That distance affects mobilization for a bore near Texas State Highway 71. The route, crew schedule and scope all matter when planning work from the Yukon yard.

What affects the cost of a Midfield bore under Texas State Highway 71?

The route length, pipe or conduit size, Edna clay, utility crossings, exposed lines, pavement, pits and equipment time all affect the scope. A Texas State Highway 71 crossing adds highway planning, while Midfield’s 505 road miles from Yukon affect mobilization. Drainage near Wallace Creek and emergency timing can also change the work required.

Where the Midfield facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Midfield

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Midfield, Texas

Type the address of your job in Midfield. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Midfield

Same county: Van Vleck · Matagorda · Sargent · Wadsworth. All counties: Texas county list.