Sargent Texas Directional Boring: Surfside Clay, Caney Creek and FM 457
Quick Answer: Can we carry your line beneath FM 457 or Caney Creek without cutting the surface? Yes, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Sargent, Texas, including crossings at FM 457. Sargent is 534 road miles from our Yukon, Oklahoma, main office, and Canal Drive is one local route to assess for access. Surfside soil and mapped heavy clay can cling to the reamer, so staged passes and a controlled pull matter.
Sargent bores at a glance
- Unincorporated community in Matagorda County, Texas. Population 1,212 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 534 miles, about 10.8 hours of driving.
- Ground: Surfside soil is mapped on 39 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 457. State permit office: TxDOT Yoakum District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Caney Creek and Jackson Ditch.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone handle directional boring near Sargent’s Farm Market 457?
Trinity takes directional boring work in Sargent, an unincorporated community in Matagorda County with 1,212 people in the 2020 Census count. Can we get your line under Farm Market 457 or Caney Creek without cutting across it? We can bore water, sewer, gas, electric conduit and fiber along streets such as Oak Circle or Creekside Drive.
Our main office is in Yukon, Oklahoma, and Sargent work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982. For a service along Oak Circle or a crossing near Caney Creek, our work ranges from 3/4 inch service lines to 48 inch casing and from 10 feet to 5,000 feet.

What is Surfside soil like to bore through in Sargent?
The USDA soil survey maps Surfside soil across 39 percent of Sargent, with clay covering 67 percent of the mapped area at about 40 inches below the surface. At that depth, the survey shows an average clay content of 57 percent, and the mapped soils are mainly CH and CL. These are soil patterns, not test borings. Clay can hold the hole open, but sticky material may ball up on a reamer and grip the pipe, so the bore plan needs to account for cleanup and pull timing.
| USDA soil survey, inside the Sargent mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Surfside 39 percent, Asa 15 percent, Pledger 15 percent, Clemville 7 percent and Ijam 5 percent |
| Texture at the surface | clay 67 percent, silty clay loam 18 percent and silt loam 3 percent |
| Texture about 40 inches down | clay 67 percent, silty clay loam 15 percent and silty clay 7 percent |
| Engineering class about 40 inches down | fat clay (CH) 67 percent and lean clay (CL) 22 percent |
| Average clay content about 40 inches down | 57 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 50 percent of the area |
| Flood prone soils | 66 percent of the area |
| High corrosion risk for uncoated steel | 84 percent of the area |
The USDA map does not show bedrock in Sargent’s upper five feet, though that does not establish conditions deeper down. It maps a seasonal water table within 40 inches across 50 percent of the area and flood prone soils across 66 percent, so pits and creek approaches may need water management. High steel corrosion risk covers 84 percent of the mapped area, a concern for uncoated casing and tracer wire. The geologic map identifies Holocene alluvium, including sand, silt, clay and gravel, where streams have deposited mixed material.
How do we bore Sargent’s clay without losing control?
Surfside clay and the mapped seasonal water table call for a bore plan that manages sticky cuttings and keeps pits workable. At Caney Creek, we also plan the route and depth around the channel.
- Surfside soil is mapped across 39 percent of Sargent, so we use staged reaming and fluid suited to sticky clay before pulling pipe through the opened hole.
- With a seasonal water table mapped within 40 inches across 50 percent of the area, we keep pits near Creekside Drive manageable and pump out water when needed.
- At Caney Creek, we plan bore depth to pass beneath the channel and check the crossing for jurisdiction before choosing the route.
- On a route near FM 457, we expose each marked utility with hydrovac before drilling close and track the head from the surface as depth and pitch are logged.

What is in the way of a new line in Sargent near FM 457?
FM 457 is a state highway within Sargent’s mapped community boundary, with 12.2 mapped roadway miles inside it. Farm Market 457 is also the longest named street at 5.95 miles. Oak Circle runs 2.51 miles, Creekside Drive runs 2.49 miles, and Canal Drive runs 2.47 miles inside the community. A bore beside or under these routes needs its own path review, especially where pavement or driveways leave limited room for entry and exit pits.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 457 | State highway | 12.2 roadway miles inside | State highway office |
| Caney Creek | Stream | 12.3 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Jackson Ditch | Stream | 0.74 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Salt Bayou | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Boggy Bayou | Stream nearby | 0.6 miles outside | Checked for Corps of Engineers jurisdiction |
| Intracoastal Waterway | Lake or pond | 268 acres, inside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Sargent or within 1 mile outside its boundary, and no street and rail crossing is mapped inside. Caney Creek runs 12.3 channel miles in the community, while Jackson Ditch accounts for 0.74 miles; the map records 3 street crossings of named streams. The Intracoastal Waterway is mapped inside the boundary as a 268 acre water feature. A creek or water crossing needs a jurisdiction check during planning.
Who has to sign off on a Sargent bore in Matagorda County?
Sargent has no city government, so a street permit is handled by Matagorda County or the state, depending on the route. For work in FM 457 right of way, the line owner, not our drilling crew, files a utility permit through TxDOT’s online RULIS system; the Yoakum District reviews it, and we prepare the bore plan and profile for the owner. TxDOT rules require boring or tunneling beneath existing highway pavement. Electric and communication lines need 60 inches of cover at a highway crossing, while water lines need 60 inches; the permit may set another depth. Caney Creek crossings are checked for federal jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Sargent, Matagorda County?
The provider serving a particular Sargent address has to be confirmed with the county or local water district before a bore is planned; EPA drinking water records do not match a system to the community by place name. In Matagorda County, AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative report electric service. We confirm which utility owns the line near Oak Circle or another proposed route before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative | Electric utilities reporting service in Matagorda County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Sargent’s median housing year at 1976; 6 percent of homes were built before 1960, 72 percent from 1960 to 1999 and 22 percent in 2000 or later. That mix can mean a replacement line on Oak Circle or a new service, but home age does not identify buried pipe. We hydrovac pothole each marked utility along the bore path before drilling near it, since locate paint shows position, not depth.

What is near Sargent, including Wadsworth?
Sargent is an unincorporated community in Matagorda County, with 7.45 square miles of mapped land, an elevation of 2 feet and ZIP code 77414. Jones Creek is 16.1 miles northeast, Wadsworth is 16.7 miles west, Sweeny is 17.5 miles north and Brazoria is 17.7 miles north. Freeport is the nearest larger city, 20.0 miles northeast, while Bay City, the county seat, is 23.1 miles northwest. From our Yukon yard, the route is 534 road miles and a 10.8 hour drive, which affects mobilization for a Canal Drive project.
Places near Sargent
- Directional boring in Jones Creek: 16.1 miles northeast
- Directional boring in Wadsworth: 16.7 miles west
- Directional boring in Sweeny: 17.5 miles north
- Directional boring in Brazoria: 17.7 miles north
- Directional boring in Wild Peach Village: 19.6 miles north
- Directional boring in Freeport: 20 miles northeast
What would we bore near Sargent’s Creekside Drive?
- Highway crossing: A line under FM 457 needs a route and bore plan that account for the state highway right of way and pavement.
- Water service: A new service along Oak Circle can run underground without opening the full street, after the provider for that address is confirmed.
- Fiber drop: A fiber route beside Creekside Drive can use a bore path planned around marked utilities and available pit space.
- Creek crossing: A Caney Creek bore needs depth planning under the channel and a jurisdiction check before the route is set.
- Canal service: A line near Canal Drive may need pits positioned around the mapped Intracoastal Waterway and nearby drainage.
- Replacement line: A bore near Farm Market 457 can replace an aging service while limiting surface cuts across pavement or driveways.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What drives the price of directional boring near Sargent’s Canal Drive?
For a Canal Drive quote, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. The route beside FM 457 and the available room for entry and exit pits help us understand the site. Creekside Drive access and any nearby drainage also shape the bore plan.
The 534 road miles from Yukon affect mobilization for work in Sargent. Surfside clay can change reaming and pull requirements, while a crossing of FM 457 brings highway permit planning into the scope. We also consider pipe size and length, utilities that must be exposed, pavement, creek or drainage crossings, pit work, sand backfill and excavator time. High profile or emergency work can add planning demands around Canal Drive or Caney Creek.
Questions people ask about boring in Sargent
Does Trinity take directional boring jobs in Sargent, Matagorda County?
Yes, we take directional boring work in Sargent, Matagorda County. Our Yukon office coordinates projects using Trinity crews and partner contractor yards selected through personal vetting. You keep working with Trinity from the first call through the bore log, whether the route is near Farm Market 457 or Canal Drive.
Can a line be bored under Caney Creek in Sargent?
A bore under Caney Creek can be planned to pass beneath the channel, with the route and depth set for the crossing. The creek has 12.3 channel miles mapped inside Sargent. During planning, the crossing is checked for U.S. Army Corps of Engineers jurisdiction before the bore approach is settled.
Who owns electric lines in Sargent, Matagorda County, and who confirms conduit specs?
The electric line owner depends on the Sargent address, so we confirm the owner before planning conduit. AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative report service in Matagorda County. The confirmed line owner can provide the conduit requirements for a route near Oak Circle or FM 457.
Does the county control Creekside Drive in Sargent, and must it be cut?
Sargent has no city government, so its streets fall under county or state authority rather than a city street department. A bore along Creekside Drive can pass below the surface instead of cutting the street, subject to the route and required approvals. FM 457 is a state highway, so TxDOT handles its right of way.
How old are buried lines near Oak Circle in Sargent, and can they be replaced by bore?
The American Community Survey 2019 to 2023 estimates put Sargent’s median housing year at 1976, but home age does not establish the age or material of a buried line near Oak Circle. A replacement can be installed by bore when the route works. We expose marked utilities first so the drill path accounts for existing lines.
Will groundwater or flood prone ground affect bore pits near Caney Creek in Sargent?
It can affect pit setup near Caney Creek. The USDA soil survey maps a seasonal water table within 40 inches across 50 percent of Sargent and flood prone soils across 66 percent. We plan pit locations and pumping for wet ground, and set creek crossing depth to pass below the channel.
What bore sizes and lengths can Trinity handle near Canal Drive in Sargent?
For work near Canal Drive, our range is 3/4 inch service lines through 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The right equipment and plan depend on the line, route and ground. Surfside clay and the nearby Intracoastal Waterway can affect the details.
How much Texas811 notice is needed for a Sargent bore along Farm Market 457?
For a bore along Farm Market 457, the Texas811 locate request must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before. Texas811 describes the minimum as two working days. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.
What affects the cost of a directional bore under FM 457 in Sargent?
The FM 457 route is one factor, since state highway permitting and pavement affect the plan. Cost also reflects bore length and size, Surfside clay, utility exposures, creek or drainage crossings, pits, excavator time and backfill. Sargent’s 534 road miles from Yukon also affect mobilization, as can high profile or emergency work.
Where the Sargent facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Sargent
- U.S. Census Bureau, TIGER/Line 2024: Sargent boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Sargent population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Sargent housing units and year built
- Macrostrat geologic map compilation: map units under Sargent
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Matagorda County
- U.S. Geological Survey, Elevation Point Query Service: Sargent elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Sargent
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Sargent
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Sargent, Texas
Type the address of your job in Sargent. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
