trinityboringsolutions.com

Van Vleck Texas Directional Boring: Edna Loam, Caney Creek and Texas State Highway 35

Quick Answer: Edna loam in Van Vleck can hold a bore open, while sticky clay can build up on the reamer. We take directional boring, also called horizontal directional drilling (HDD), work for routes beneath Texas State Highway 35. The Yukon main office is 510 road miles from Van Vleck, including jobs near Caney Creek. Clay covers 41 percent of the mapped surface, so crews plan fluid and reaming to keep the hole workable.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Van Vleck bores at a glance

  • Unincorporated community in Matagorda County, Texas. Population 1,923 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 510 miles, about 10.5 hours of driving.
  • Ground: Edna soil is mapped on 28 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 35 and FM 2540. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Caney Creek, Hardeman Slough, Spoil Bank and Snead Slough.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring in Van Vleck near Union Pacific?

Edna loam in Van Vleck can hold a bore open, and Trinity Boring Solutions takes directional boring work in Matagorda County. The Census Bureau counted 1,923 residents in Van Vleck in the 2020 Census. We install water, sewer, gas, electric conduit and fiber lines, including service routes along Old Van Vleck Road or beneath Texas State Highway 35.

Our main office is in Yukon, Oklahoma, and Van Vleck work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. With AEP Texas Central among the electric providers reporting service in Matagorda County, our record of no utility strike in over 25 years matters when a replacement route meets existing lines. Our family business began in 1965, and we have done directional boring since 1982, experience we bring to routes along Avenue G.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What kind of ground does Van Vleck have near Edna soil?

Van Vleck has mapped Edna soil and heavy clay that can grip a pipe or build up on a reamer. The USDA soil survey maps the Edna series across 28 percent of the area and Edna loam across 23 percent. Clay is the leading surface texture, covering 41 percent of the mapped area. At about 40 inches below the surface, 92 percent of mapped soil is clay, with average clay content of 50 percent at that depth. These are mapped patterns, not test borings.

USDA soil survey, inside the Van Vleck mapped community boundaryWhat is mapped
Soil series mappedEdna 28 percent, Laewest 19 percent, Dacosta 14 percent, Brazoria 12 percent and Pledger 10 percent
Texture at the surfaceclay 41 percent, loam 24 percent and sandy clay loam 14 percent
Texture about 40 inches downclay 92 percent and silty clay loam 4 percent
Engineering class about 40 inches downfat clay (CH) 93 percent and lean clay (CL) 5 percent
Average clay content about 40 inches down50 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches32 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel89 percent of the area

Bedrock is not mapped in the top five feet of Van Vleck, though deeper rock is not ruled out. The USDA soil survey maps a seasonal water table within 60 inches across 32 percent of the area, so pits may need pumping. Flood prone soils cover 1 percent, including ground to consider near Caney Creek. High steel corrosion risk covers 89 percent, so the line owner should weigh casing and tracer wire materials. The Pleistocene Beaumont Formation includes areas predominantly mapped as sand, fine alluvium, with clayey channel deposits also described.

How do crews bore Van Vleck clay?

For Van Vleck clay, we manage the bore so sticky cuttings do not overload the reamer or grip the pipe. Along routes near Caney Creek, ground conditions and drainage also shape the plan.

  1. Edna loam and the area’s clay can stick to the reamer, so we use thinner drilling fluid with polymer and open the hole in stages.
  2. With heavy clay mapped in Van Vleck, we watch fluid returns closely near pavement to avoid pressure lifting the surface.
  3. The seasonal water table mapped in parts of Van Vleck can fill a Caney Creek side pit, so we plan compact pits and pumping where needed.
  4. Before a bore near Avenue G, we hydrovac pothole marked utilities, then track the drill head from the surface and log its depth and pitch.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Where does a line have to go under Texas State Highway 35 in Van Vleck?

Texas State Highway 35 runs 2.6 mapped roadway miles inside the Van Vleck community, and FM 2540 adds 0.1 mile. A line beneath existing Texas State Highway 35 pavement is installed by boring or tunneling under TxDOT rules. Old Van Vleck Road is the longest named street, at 3.54 miles within the community. Pin Oak Circle covers 2.12 miles, and Avenue G covers 1.22 miles. Those routes may bring pavement, driveways or existing services into the bore plan.

CrossingTypeMapped extentWho has a say
Texas State Highway 35State highway2.6 roadway miles insideState highway office
FM 2540State highway0.1 roadway miles insideState highway office
Union PacificRailroad nearby0.3 miles outsideThe railroad
Caney CreekStream6.93 channel miles insideChecked for Corps of Engineers jurisdiction
Hardeman SloughStream3.74 channel miles insideChecked for Corps of Engineers jurisdiction
Spoil BankStream0.91 channel miles insideChecked for Corps of Engineers jurisdiction
Snead SloughStream0.05 channel miles insideChecked for Corps of Engineers jurisdiction
Bucks BayouStream nearby0.9 miles outsideChecked for Corps of Engineers jurisdiction
Bouldin LakeLake or pond11 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific track lies 0.3 miles from the mapped Van Vleck boundary; no railroad is mapped inside the community, and no street and rail crossing is mapped there. A crossing of that track needs an agreement with Union Pacific. Caney Creek runs 6.93 channel miles inside the community, and eight mapped street crossings cross named streams. Hardeman Slough adds 3.74 channel miles. Bouldin Lake, an 11 acre lake, is outside the boundary but within one mile.

Do I need a permit for a Van Vleck bore in Matagorda County?

In Van Vleck, Matagorda County handles county streets because this unincorporated community has no city government, while TxDOT handles work on Texas State Highway 35 and FM 2540. The TxDOT Yoakum District reviews highway utility permits. The utility owner files through TxDOT’s RULIS system; we prepare the bore plan and profile for its application and work under the owner’s permit. Existing highway pavement must be bored or tunneled beneath, and the highway permit sets the required cover. A route crossing Union Pacific track needs an agreement with the railroad. Caney Creek crossings are checked for federal waterway jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities have lines in Van Vleck, Matagorda County?

In Van Vleck, the water provider for a specific address has to be confirmed with Matagorda County or the local water district before a bore is planned. EPA drinking water records do not tie a matched system to this community. AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative report electric service in the county. Those records do not identify the provider at every address, so we confirm the line owner before planning an electric conduit bore near Avenue G.

Line ownerWhat it isSourceSize
AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric CooperativeElectric utilities reporting service in Matagorda CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Van Vleck’s median housing year at 1987; 19 percent of homes were built before 1960, 48 percent from 1960 to 1999 and 33 percent in 2000 or later. Older lines along Pin Oak Circle may call for replacement bores, while newer construction can need service extensions. We hydrovac pothole every marked utility on the route before drilling near it. For a bore beneath Pin Oak Circle, paint alone does not show a line’s depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Van Vleck and nearby Bay City?

Van Vleck is an unincorporated community in Matagorda County, 5.5 miles northeast of Bay City, the county seat and nearest larger city. Its mapped area is 7.29 square miles, its elevation is 42 feet, and its ZIP code is 77482. Sweeny is 11.3 miles east; Markham is 11.8 miles southwest. Our Yukon, Oklahoma main office is 510 road miles away, a drive of 10.5 hours. That distance affects mobilization for a bore near Texas State Highway 35.

Places near Van Vleck

What boring work comes up near Caney Creek in Van Vleck?

  • Highway crossing: A bore beneath Texas State Highway 35 needs a route and cover plan that fits the TxDOT permit.
  • Water service: A new or replacement line along Old Van Vleck Road needs the address specific water provider confirmed before planning.
  • Creek crossing: A Caney Creek bore needs a depth plan beneath the channel and a check for federal waterway jurisdiction.
  • Rail crossing: A route toward Union Pacific track, 0.3 miles from the mapped community boundary, needs the railroad’s crossing agreement.
  • Fiber drop: A fiber conduit beneath Pin Oak Circle can leave the street surface uncut while marked services are exposed first.
  • Drainage crossing: A bore near Hardeman Slough must account for its 3.74 channel miles inside the Van Vleck community.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a Van Vleck bore near Old Van Vleck Road?

A map pin matters for an Old Van Vleck Road bore because the exact route determines which pavement, services or drainage features lie in its path. To scope the work, send the address or pin, what goes in the ground, the pipe or conduit size and the footage. A sketch or plans can help us assess a Caney Creek crossing or a route beneath Texas State Highway 35.

A short route through Edna loam with few exposed utilities may be simpler to plan than a bore involving sticky clay or a creek crossing. Length, pipe size, soil, the number of utilities to expose, pavement, pits and excavator time all affect the scope. Texas State Highway 35 may add permit and cover planning. Caney Creek can require waterway jurisdiction review. Mobilization also reflects the 510 road miles from Yukon, and emergency or high profile work can add planning demands.

Questions people ask about boring in Van Vleck

Does Trinity take boring work in Van Vleck, Matagorda County, and how is it staffed?

Yes, we take directional boring work in Van Vleck, Matagorda County. Our own crews and satellite yards operated by partner drilling contractors we have vetted can staff the work. The Yukon main office remains the point of contact, so you work with Trinity through the bore log even when a partner crew is on site.

Can a line be bored beneath Caney Creek in Van Vleck?

A line can be planned beneath Caney Creek, subject to the route, ground and crossing review. The creek runs 6.93 channel miles inside Van Vleck. We plan the bore depth to pass below the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.

Who owns electric lines in Van Vleck, Matagorda County, and who confirms conduit specs?

The electric line owner depends on the specific Van Vleck address. AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative report service in Matagorda County. We confirm the owner and conduit requirements for the proposed route before planning a bore near Texas State Highway 35.

Does the county control Avenue G in Van Vleck, and does a bore require cutting it?

Matagorda County is responsible for county streets in Van Vleck, which has no city government. A directional bore beneath Avenue G can avoid cutting the street surface when the route and site conditions allow. Marked utilities along the proposed path are exposed before the drill approaches them.

Do older homes near Pin Oak Circle in Van Vleck need replacement bores?

They may. The American Community Survey 2019 to 2023 estimates put the median housing year in Van Vleck at 1987, with 19 percent of homes built before 1960. A replacement bore near Pin Oak Circle needs the existing line route and marked utilities checked before the new pipe is pulled in.

Can groundwater or flood prone soil affect bore pits near Caney Creek in Van Vleck?

Yes, groundwater can affect pits near Caney Creek. The USDA soil survey maps a seasonal water table within 60 inches across 32 percent of Van Vleck, while flood prone soils cover 1 percent. We can plan smaller pits and pumping where site conditions call for them, and set the creek crossing depth below the channel.

What bore sizes and lengths can Trinity handle for a Van Vleck job near Avenue D?

For a Van Vleck project near Avenue D, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. The route, ground and utility crossings help determine the suitable setup. A sketch can clarify the proposed path along Avenue D.

How much notice does Texas811 need for a Van Vleck bore near Old Van Vleck Road?

For a bore near Old Van Vleck Road, request the Texas811 locate at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If the start slips more than 14 days past the original notice, submit a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

What affects the cost of a Van Vleck bore under Texas State Highway 35?

The route and work scope determine the price of a bore under Texas State Highway 35. Length, pipe size, Van Vleck’s clay, pavement, the utilities that need exposure, pits and creek crossings all affect planning and equipment. The 510 road miles from Yukon also factor into mobilization. We need the location and scope to assess the work.

Where the Van Vleck facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Van Vleck

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Van Vleck, Texas

Type the address of your job in Van Vleck. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Van Vleck

Same county: Palacios · Blessing · Matagorda · Midfield · Sargent. All counties: Texas county list.