trinityboringsolutions.com

Markham Texas Directional Boring: Dacosta Sandy Clay Loam, FM 1468 and Wilson Creek

Quick Answer: Along FM 1468 and 3rd Street, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Markham, Texas. Markham is 511 road miles from our Yukon, Oklahoma main office, so a Murphy Road project includes a long mobilization. The USDA soil survey maps Dacosta sandy clay loam across 49 percent of the area, with clay under about 40 inches. That sticky ground can grip a pipe, so we plan staged reaming and a timely pull.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Markham bores at a glance

  • Unincorporated community in Matagorda County, Texas. Population 908 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 511 miles, about 10.4 hours of driving.
  • Ground: Dacosta soil is mapped on 49 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 1468, Texas State Highway 35, FM 2431 and FM 2175. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: none mapped.
  • Public water: Markham Municipal Utility District, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring on Markham 3rd Street?

Trinity Boring Solutions takes directional boring work in Markham, Matagorda County, where the Census Bureau 2020 Census count lists 908 people. The USDA soil survey maps Dacosta sandy clay loam across 49 percent of Markham, with clay under about 40 inches. Water, sewer, gas, electric conduit and fiber bores can follow or cross 3rd Street, Murphy Road and FM 1468 without opening those routes across their full length.

Our main office is in Yukon, Oklahoma, and Markham work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore reached roughly 4,100 feet with 48 inch pipe under the Arkansas River in Tulsa. That reach is far beyond the service and conduit runs that may follow Markham streets. We are a family business started in 1965, with directional boring work dating to 1982.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

How does Dacosta soil affect boring in Markham?

Dacosta sandy clay loam is the leading mapped soil in Markham, covering 49 percent of the area; Edna loam accounts for 20 percent, and Laewest clay for 11 percent. The USDA soil survey maps clay under about 40 inches across 98 percent of the area and gives an average clay content of 44 percent at that depth. These are mapped soil patterns, not test borings at a Murphy Road address. Clay can hold the hole open, but it sticks to the reamer and may swell around pipe.

USDA soil survey, inside the Markham mapped community boundaryWhat is mapped
Soil series mappedDacosta 49 percent, Edna 30 percent, Laewest 11 percent and Tidehaven 8 percent
Texture at the surfacesandy clay loam 49 percent, loam 32 percent and clay 11 percent
Texture about 40 inches downclay 98 percent
Engineering class about 40 inches downfat clay (CH) 100 percent
Average clay content about 40 inches down44 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches30 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel90 percent of the area

The USDA soil survey maps a seasonal water table within 40 inches across 30 percent of Markham, so pits may need pumping, especially after wet weather around 3rd Street. Flood prone soils are not mapped in the area. High steel corrosion risk is mapped across 90 percent, a factor for the line owner to weigh for steel casing and tracer wire. Bedrock is not mapped in the top five feet. The Beaumont Formation, of Pleistocene age, is described as predominantly clay, which supports planning for sticky ground rather than assuming a clean sand bore.

How do we drill through Markham clay?

For a Markham bore through Dacosta sandy clay loam, we manage sticky returns and protect the road surface. Near FM 1468, the mapped clay calls for controlled fluid and careful reaming, not a fast pull through an unprepared hole.

  1. With Dacosta sandy clay loam on much of Markham, we use thinner drilling fluid with polymer to manage sticky cuttings and reduce clay gripping the pipe.
  2. Where the mapped clay is heavy, we watch fluid returns along streets such as Murphy Road and keep pressure controlled beneath pavement.
  3. We ream in stages and have pipe ready before the last pass, then pull it the same day the hole is opened to limit swelling around it.
  4. At marked water or electric lines near 3rd Street, we hydrovac expose each utility first, then track the drill head and log its depth and pitch.
Drilling fluid returns at the entry as the Vermeer D24x40 S3 drills a 385 foot sandstone rock bore in Guthrie, Oklahoma
Drilling fluid coming back to the entry pit as our Vermeer D24x40 drills a 385 foot bore in Guthrie, Oklahoma.

What does a bore have to cross near Markham and Wilson Creek?

FM 1468, Texas State Highway 35, FM 2431 and FM 2175 run inside Markham’s mapped community boundary; Texas State Highway 111 touches or follows that boundary. TxDOT state routes make right of way location and pavement plans important before a bore is laid out. The longest named local streets are 3rd Street at 1.33 miles, Murphy Road at 1.04 miles and Broadway Street at 0.91 miles. A route can also use Avenue K or Krenek Road, so we need the proposed path rather than just the street name.

CrossingTypeMapped extentWho has a say
FM 1468State highway2.6 roadway miles insideState highway office
Texas State Highway 35State highway1.7 roadway miles insideState highway office
FM 2431State highway0.8 roadway miles insideState highway office
FM 2175State highway0.5 roadway miles insideState highway office
Texas State Highway 111Highway nearbyRuns along or touches the city limitsState highway office
Wilson CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Markham or within one mile outside it, and no street and rail crossing is mapped in the community. No named stream runs inside the boundary; Wilson Creek is 1.0 mile from it. The map records 7.47 miles of unnamed drainage inside Markham, so a route near a drainage feature still needs a site specific look. No street crossing of a named stream is mapped inside the community, and no lake or pond is mapped within one mile.

Who approves a bore in Markham, Matagorda County?

Markham has no city government, so a bore on a local street is handled by the county, while work in the right of way of FM 1468 or another state route needs a TxDOT utility permit. The utility line owner files through TxDOT’s RULIS system, and we prepare the bore plan and profile for its application; TxDOT’s Yoakum District reviews it. Existing highway pavement is bored or tunneled beneath, with casing and rural travel lane coverage addressed in the permit. For a crossing of Wilson Creek, we check during planning whether the U.S. Army Corps of Engineers has jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Markham through Markham Municipal Utility District?

Markham Municipal Utility District operates the public water system, which uses groundwater wells and serves 1,400 people through 460 service connections. A water bore near Murphy Road should be planned against the district’s marked lines, not from a surface guess. Electric service reported in Matagorda County includes AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative. We confirm the owner for a specific Markham conduit route before setting its bore path.

Line ownerWhat it isSourceSize
Markham Municipal Utility DistrictPublic water systemGroundwater wells460 connections, 1,400 people served
AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric CooperativeElectric utilities reporting service in Matagorda CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Markham’s median housing year at 1971; 20 percent of homes were built before 1960, 64 percent from 1960 to 1999 and 16 percent in 2000 or later. Those ages do not establish when a buried line was installed, but a replacement near Broadway Street may need to cross older service routes. Before drilling near the Markham Municipal Utility District water line or marked electric facilities, we hydrovac pothole each marked utility on the path. Paint shows position, not depth.

Mini excavator digging beside a pad mounted electrical transformer with red dirt spoil and a vacuum excavation trailer on site
Digging beside a pad mounted electric transformer with a vacuum excavation trailer on site.

What is near Markham and Bay City?

Markham is an unincorporated community in Matagorda County, 52 feet above sea level and covering 2.25 square miles, with ZIP code 77456. Bay City, the county seat and nearest larger city, lies 6.5 miles east; Midfield is 9.2 miles west, Blessing is 11.0 miles southwest, Van Vleck is 11.8 miles northeast and Wadsworth is 12.9 miles southeast. From our Yukon, Oklahoma main office, Markham is 511 road miles and a 10.4 hour drive. We take work in Markham, Bay City and rural Texas locations, with each route planned for its own roads and ground.

Places near Markham

What boring work comes up on Markham Murphy Road?

  • Water service: A connection near Murphy Road can be bored from the Markham Municipal Utility District system while keeping the route clear of marked lines.
  • Highway crossing: A conduit route beneath FM 1468 needs a bore plan that addresses TxDOT right of way and the road surface.
  • Fiber drop: A fiber run along 3rd Street can pass beneath pavement and driveways without cutting a continuous trench through the street.
  • Drainage crossing: Near Markham’s mapped unnamed drainage, a bore route needs pits placed clear of the channel and its banks.
  • Electric conduit: A route near Broadway Street starts with identifying the Matagorda County line owner and exposing marked utilities on the path.
  • Replacement line: Along FM 2431, an older service route can be replaced by a bore that limits open cuts across pavement and access points.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Markham bore near FM 1468?

Start with a map pin or address, because a point on FM 1468 and one near Wilson Creek can mean different ground, access and crossing needs. Tell us what will go in the ground and the pipe or conduit size and footage. A sketch or plans help us see how the proposed route meets nearby Markham roads and utilities.

The 511 road miles from Yukon affect mobilization for a Markham job, while Dacosta clay can change drilling time and reaming. Price also reflects bore length, pipe or conduit size, marked utilities to expose, pavement or concrete, drainage crossings, pits and backfill. A route beneath FM 1468 brings highway permit and cover requirements into the plan. A path near Wilson Creek or unnamed drainage may need added crossing review and site planning.

Questions people ask about boring in Markham

Does Trinity Boring Solutions take Markham jobs in Matagorda County, and how are crews assigned?

Yes, we take directional boring work in Markham and across Texas. Our own crews handle jobs, and partner drilling contractors from satellite yards may also staff a Markham project. You work with Trinity from the first call through the bore log, whether the route is on 3rd Street or near FM 1468.

Who runs Markham’s public water system, and where does the water come from?

Markham Municipal Utility District runs the public water system, and its source is groundwater wells. The system serves 1,400 people through 460 service connections. For a bore near Murphy Road, we plan around the district’s marked water lines and expose marked utilities before drilling close to them.

Which electric companies report service in Markham, Matagorda County, and who confirms conduit specs?

AEP Texas Central, CenterPoint Energy, Texas-New Mexico Power, Jackson Electric Cooperative and Wharton County Electric Cooperative report electric service in Matagorda County. The line owner for a particular Markham address must be confirmed before conduit planning. We coordinate the route and conduit details with that owner near FM 1468 or another local road.

Who is responsible for Markham streets such as Broadway Street, and must a bore cut the road?

Markham is unincorporated and has no city government, so local street matters belong to the county or the state according to the road. A bore can pass beneath Broadway Street without an open cut across the pavement. The exact route and applicable road authority need to be identified before planning.

Do homes near Markham Murphy Road have old lines that need replacement bores?

Housing age does not tell us the installation date of a buried line, but it helps explain why replacement work may come up. The American Community Survey 2019 to 2023 estimates give Markham a median housing year of 1971, with 20 percent of homes built before 1960. A Murphy Road route needs marked utilities exposed before drilling nearby.

Can groundwater or flooding affect Markham bore pits near Wilson Creek?

A seasonal water table is mapped within 40 inches across 30 percent of Markham, so some pits may need pumping. Flood prone soils are not mapped, but Wilson Creek lies 1.0 mile from the community boundary. We assess the actual route and drainage conditions before placing pits or planning a creek crossing.

Does Trinity cover Markham, Bay City and rural sites outside the community?

Yes, Trinity takes work across Texas, including Markham, Bay City and rural locations outside the mapped community boundary. Bay City is 6.5 miles east of Markham. We plan each bore around the address, access, soil and crossings rather than assuming a rural route has the same conditions as 3rd Street.

How early should I call Texas811 for a Markham bore along 3rd Street, and what if marks move?

For a bore along 3rd Street, the locate request must be made at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. Texas811 describes this as at least two working days. If the start slips more than 14 days past the original notice, make a new request; refresh worn or moved marks through Texas811 before work continues.

What affects the cost of a directional bore near Markham FM 1468?

The job details determine the price, not just the distance along FM 1468. Length, pipe or conduit size, Dacosta clay, utilities to expose, pavement, drainage crossings, pits and backfill all affect the work. Mobilization also reflects Markham’s 511 road miles from Yukon, and a state highway route needs its permit plan.

Where the Markham facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Markham

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Markham, Texas

Type the address of your job in Markham. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Markham

Same county: Palacios · Matagorda · Sargent. All counties: Texas county list.