trinityboringsolutions.com

Moore Texas Directional Boring: Duval Soil, Interstate 35 and Union Pacific

Quick Answer: In Moore, the USDA soil survey maps sandy clay loam at about 40 inches, with weathered bedrock mapped within five feet in parts of the community. We take directional boring, also called horizontal directional drilling (HDD), across Interstate 35 and FM 462 for water, sewer, gas, electric conduit or fiber. Moore is 520 road miles from our Yukon, Oklahoma main office, and the Union Pacific Laredo Subdivision is one local crossing to plan around. Duval soil and sandy ground can cave behind a bit, so staged reaming and a ready pipe help keep the hole supported.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Moore bores at a glance

  • Unincorporated community in Frio County, Texas. Population 610 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 520 miles, about 10 hours of driving.
  • Ground: Duval soil is mapped on 43 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 49 percent of the area.
  • Highways inside the boundary: Interstate 35 and FM 462. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: Union Pacific, with 4 mapped street and rail crossings.
  • Named streams inside the boundary: Moore Hollow and Black Creek.
  • Public water: Moore Water Supply Corporation, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring across Interstate 35 in Moore?

What lies under the first five feet in Moore? The USDA soil survey maps sandy clay loam at about 40 inches, and weathered bedrock occurs in mapped areas. Moore is an unincorporated community in Frio County with 610 people, the 2020 Census count. We install water, sewer, gas, electric conduit and fiber along routes such as Johnson Road or near Interstate 35, with the bore plan shaped around the specific crossing.

Our main office is in Yukon, Oklahoma, and Moore work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For Moore, our range runs from a 3/4 inch service line near Johnson Road to 48 inch casing for a large crossing, with bore lengths from 10 feet to 5,000 feet. We are a family business started in 1965 and have done directional boring since 1982; the 520 road miles to Moore inform mobilization planning.

Horizontal directional drill rig set up on an open grass field with support trucks and a vacuum excavation truck
Our horizontal directional drill set up in an open field with the support trucks and the vacuum excavation truck. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should a bore expect in Moore Duval soil?

The USDA soil survey maps Duval soil across 43% of Moore, followed by Webb at 10% and Hindes at 9%. At about 40 inches below the surface, sandy clay loam is mapped across 62% of the area, and average clay content is 29%. The survey also maps 42% as sandy at that depth. These are mapped soil patterns, not test borings: a Duval route may change from loose sandy surface material to clayier ground lower down, so the drilling fluid and reaming approach need to suit the changing cuttings.

USDA soil survey, inside the Moore mapped community boundaryWhat is mapped
Soil series mappedDuval 43 percent, Webb 10 percent, Hindes 9 percent, Poteet 8 percent and Dilley 6 percent
Texture at the surfacevery fine sandy loam 48 percent, loamy fine sand 29 percent and very gravelly sandy clay loam 9 percent
Texture about 40 inches downsandy clay loam 62 percent, gravelly clay loam 9 percent and cemented material 9 percent
Engineering class about 40 inches downlean clay (CL) 46 percent, clayey sand (SC) 32 percent and fat clay (CH) 6 percent
Average clay content about 40 inches down29 percent
Bedrock mapped within 60 inches49 percent of the area (0 percent hard rock, 49 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel15 percent of the area

Weathered bedrock is mapped within 60 inches across 49% of Moore, while hard bedrock is not mapped within that depth; typical mapped bedrock depth is 47 inches. Seasonal water tables are not mapped within 60 inches, but flood prone soils cover 8%, so Moore Hollow crossings need attention to channel depth and Corps jurisdiction. High steel corrosion risk covers 15%, a material consideration for casing or tracer wire. The Queen City Sand unit, of Lutetian age, includes sandstone and siltstone; weathered sandstone may slow a bore compared with soil.

How do crews handle Moore sandy clay loam?

Moore has both loose sandy surface textures and sandy clay loam mapped lower down. We adjust the fluid and reaming sequence as the ground changes, especially near Interstate 35 and the mapped weathered bedrock.

  1. With sandy textures mapped across 42% of Moore at about 40 inches, we stage the reaming and have pipe ready before the final pass so loose ground has less time to cave.
  2. Sandy clay loam is mapped across 62% at that depth; thinner fluid, staged reaming and a same day pull can help manage clay that sticks to the reamer or grips pipe.
  3. On any Moore bore path, we hydrovac pothole each marked utility before the drill comes near it; paint marks location, not burial depth.
  4. Near Moore Hollow Road, we can expose a marked line before crossing it, then track the head from the surface and log depth and pitch as the bore advances.
Rock bit on the drill rod at the front of a Vermeer D24x40 S3 with broken sandstone at the entry of a rock bore in Guthrie, OK
Rock bit on the drill rod with broken sandstone at the entry of a rock bore in Guthrie, Oklahoma.

What does a bore have to cross in Moore near Union Pacific?

Interstate 35 has 4.1 mapped roadway miles inside Moore, and FM 462 has 5.2. A bore beneath either highway needs a path that avoids cutting existing pavement. The named street network includes Johnson Road, Access Road and Lower Hondo Road, with Moore Hollow Road also mapped inside the community. Johnson Road is the longest named street at 1.78 miles. Those roads and highway access points shape where entry and exit pits can fit without blocking the route.

CrossingTypeMapped extentWho has a say
Interstate 35Interstate4.1 roadway miles insideState highway office
FM 462State highway5.2 roadway miles insideState highway office
Union PacificRailroad3 track miles insideThe railroad
Moore HollowStream4.45 channel miles insideChecked for Corps of Engineers jurisdiction
Black CreekStream1.38 channel miles insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 3.0 track miles inside Moore on its Laredo Subdivision, and public records map 4 street and rail crossings. A track crossing needs an agreement with Union Pacific, whose terms cover casing, depth and flagging. Moore Hollow runs 4.45 channel miles inside the community, and Black Creek runs 1.38; 17 mapped street crossings intersect named streams. No lakes or ponds are mapped within one mile. Creek crossings are checked for Corps jurisdiction during planning.

Who approves a bore in Moore and Frio County?

Moore is an unincorporated community, so it has no city government; streets and permits fall to Frio County or the state, depending on the route. For work in the Interstate 35 or FM 462 right of way, the line owner files the utility permit through TxDOT’s RULIS system, and the TxDOT San Antonio District reviews it. We give the owner the bore plan and profile and work under its permit. TxDOT requires boring or tunneling under existing highway pavement; rural highway bores extend beneath all travel lanes. A Union Pacific track crossing also needs the railroad’s agreement, and Moore Hollow is checked for Corps jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Moore near Moore Water Supply Corporation?

Moore Water Supply Corporation is a local government owned system supplied by groundwater wells, with 336 service connections and 1,008 people served. In Frio County, AEP Texas Central, Karnes Electric Cooperative and Medina Electric Cooperative report electric service. Those countywide records do not identify the provider at every Moore address, so we confirm the line owner before planning an electric conduit bore. The confirmed owner and existing lines guide a route along Johnson Road or another local street.

Line ownerWhat it isSourceSize
Moore Water Supply CorporationPublic water systemGroundwater wells336 connections, 1,008 people served
AEP Texas Central, Karnes Electric Cooperative and Medina Electric CooperativeElectric utilities reporting service in Frio CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Moore’s median housing year at 2007; 19% of homes were built before 1960 and 81% in 2000 or later. That mix can mean replacement work near older properties as well as new service runs. Before drilling near a marked line, we expose it with hydrovac potholing because paint shows position, not depth. Along Johnson Road, for example, a marked utility on the planned path is exposed before the drill approaches.

Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building
Yellow polyethylene gas pipe pulled through a directional bore beside a commercial building.

Where is Moore in relation to Bigfoot and Pearsall?

Moore is an unincorporated census designated place in Frio County, at an elevation of 651 feet across 6.1 square miles, and its ZIP code is 78057. Devine is 8.6 miles northeast, Bigfoot is 9.2 miles east, and Yancey is 10.3 miles northwest. North Pearsall is 10.9 miles southwest, while Pearsall, the county seat and nearest larger city, is 12.7 miles southwest. Our Yukon, Oklahoma yard is 520 road miles away, about a 10.0 hour drive, which matters when planning crew and equipment mobilization.

Places near Moore

What would we bore near Moore Hollow in Moore?

  • Highway crossing: A bore beneath Interstate 35 uses boring or tunneling under existing pavement and extends beneath all rural highway travel lanes.
  • Water service: A connection near Moore Water Supply Corporation needs a route checked against existing groundwater system lines before drilling.
  • Fiber route: A fiber conduit along Access Road can use a bore to pass beneath pavement without opening a trench across the road.
  • Creek crossing: A route beneath Moore Hollow is planned below the channel and checked for Corps jurisdiction during crossing review.
  • Rail crossing: A bore beneath the Union Pacific Laredo Subdivision needs the railroad agreement to set crossing conditions.
  • Street service: A service along Johnson Road can be bored between dirt pits, with marked utilities exposed before the drill approaches.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Moore Hollow Road quote?

For a Moore Hollow Road quote, start with the address or map pin, then tell us what will go underground, such as water or fiber. Include the pipe or conduit size and the footage. A sketch showing the route, pits and nearby features such as Moore Hollow or Interstate 35 helps us see the crossing and access needs.

For a route through Moore, length and pipe size shape the equipment and reaming plan first. Duval soil, sandy ground and mapped weathered bedrock affect drilling time and fluid needs; a Union Pacific crossing or Interstate 35 pavement adds crossing and permit coordination. The number of marked utilities to expose, concrete or pavement, creek crossings, pits, excavator time and sand backfill also change the scope. The 520 road miles from Yukon affect mobilization, while high profile or emergency work can call for a different plan.

Questions people ask about boring in Moore

Does Trinity take directional boring work in Moore and Frio County?

Yes. We take directional boring work in Moore, Frio County, and across Texas. Our Yukon office coordinates the job from the first call through the bore log, whether our own crews or a partner contractor we have vetted is on site. Interstate 35 and the local street network help define the route and access.

What ground does a Moore bore go through in Duval soil?

The USDA soil survey maps Duval soil across 43% of Moore and sandy clay loam across 62% at about 40 inches below the surface. Sandy textures are also common, so conditions can shift from loose material to clayier ground lower down. Those mapped patterns guide the drilling plan but are not test borings.

Is there rock in Moore, and how much is mapped within five feet?

Weathered bedrock is mapped within 60 inches across 49% of Moore, with typical mapped depth at 47 inches. Hard bedrock is not mapped within 60 inches. The Queen City Sand unit includes sandstone and siltstone, so a bore may slow as it reaches weathered material even where hard rock is not mapped.

Who approves a bore under Interstate 35 in Moore?

For work in the Interstate 35 right of way, the line owner submits the utility permit through TxDOT’s RULIS system, and the TxDOT San Antonio District reviews it. We provide the bore plan and profile to the owner and work under the permit issued to that owner. Existing highway pavement is bored or tunneled beneath.

What does a Moore bore under Union Pacific track require?

A crossing beneath the Union Pacific Laredo Subdivision needs an agreement with the railroad that owns the track. The agreement sets crossing conditions such as casing, depth and flagging. Moore has 3.0 track miles mapped inside the community, so the route and track location need to be identified during planning.

Can a line be bored under Moore Hollow in Moore?

A bore can be planned beneath Moore Hollow, with its route set below the channel and the crossing checked for Corps jurisdiction. The stream has 4.45 channel miles mapped inside Moore, and named streams have 17 mapped street crossings. A suitable crossing path depends on the specific site and access.

How does Moore’s distance from Pearsall affect a boring job?

Moore is 520 road miles from our Yukon, Oklahoma main office, about a 10.0 hour drive; Pearsall is 12.7 miles southwest and is the county seat. The distance from Yukon affects equipment and crew mobilization, so the route, footage and crossing requirements help us plan the trip.

How early should I request a locate for a Moore bore near Johnson Road?

For a bore near Johnson Road, request a Texas811 locate at least 48 hours before excavation, counting two working days and excluding Saturdays, Sundays and legal holidays. Do not request it more than 14 days ahead. If the start slips more than 14 days past the original notice, make a new request; have worn or moved marks refreshed through Texas811 before work continues.

What affects the price of a Moore directional bore under Interstate 35?

Length, pipe size and Moore’s changing soil are key factors, along with the number of utilities that must be exposed. An Interstate 35 crossing can add pavement and permit coordination, while Union Pacific track or Moore Hollow adds crossing planning. Pits, excavator time, backfill, emergency scope and the trip from Yukon can also affect the job price.

Where the Moore facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Moore

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Moore, Texas

Type the address of your job in Moore. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Moore

Same county: Dilley · Hilltop. All counties: Texas county list.