Midway Texas Directional Boring: Zulch Soil, Gin Creek and Texas State Highway 21
Quick Answer: Texas State Highway 21 is a major route to clear, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), in Midway, Texas. Midway is 367 road miles from our Yukon, Oklahoma main office, so mobilization matters for work near Gin Creek. Zulch soil is the leading mapped series at 43 percent, while clay loam at about 40 inches can make the reamer sticky and hold the hole open. That clay can grip pipe, so we plan staged reaming and a prompt pullback along Post Oak Loop.
Midway bores at a glance
- Incorporated city in Madison County, Texas. Population 186 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 367 miles, about 7.1 hours of driving.
- Ground: Zulch soil is mapped on 43 percent of the area, with clay loam about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 7 percent of the area.
- Highways inside the boundary: Texas State Highway 21, FM 247, FM 3060 and FM 2548. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Gin Creek.
- Public water: City of Midway, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Does anyone do directional boring in Midway near Gin Creek?
Gin Creek is a natural crossing to plan around, and we take directional boring work in Midway, Madison County. The Census Bureau Vintage 2024 estimate puts the city population at 186. We install water, sewer, gas, electric conduit and fiber, routing lines beneath streets such as Old San Antonio Road or toward properties along Post Oak Loop when the route and plans call for it.
Our main office is in Yukon, Oklahoma, and Midway work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Midway’s City of Midway water lines and electric conduit routes deserve careful exposure; our record is no utility strike in over 25 years. We started our family business in 1965 and have done directional boring since 1982, planning Midway work with Zulch soils in mind. For proposed boring near Old San Antonio Road, you work with us from the first call through the bore log.

What kind of ground does Midway have around Zulch soil?
The USDA soil survey maps Zulch soil across 43 percent of Midway, with Zack soil covering 37 percent. Fine sandy loam is the surface texture in 93 percent of the mapped area, but the material changes below it. At about 40 inches, clay loam is mapped across 43 percent, loam across 37 percent and clay across 13 percent. Average clay content at that depth is 35 percent, so a bore near Gin Creek can meet sticky material that holds its shape but clings to the reamer and pipe. Zack soil series appear as mapped patterns, not test borings, so we treat them as planning context for Midway boring.
| USDA soil survey, inside the Midway city limits | What is mapped |
|---|---|
| Soil series mapped | Zulch 43 percent, Zack 37 percent, Boonville 7 percent, Flatonia 7 percent and Gredge 3 percent |
| Texture at the surface | fine sandy loam 93 percent and clay loam 7 percent |
| Texture about 40 inches down | clay loam 43 percent, loam 37 percent and clay 13 percent |
| Engineering class about 40 inches down | fat clay (CH) 53 percent, lean clay (CL) 43 percent and silty clayey sand (SC SM) 3 percent |
| Average clay content about 40 inches down | 35 percent |
| Bedrock mapped within 60 inches | 7 percent of the area (0 percent hard rock, 7 percent weathered rock) |
| Seasonal water table within 60 inches | 10 percent of the area |
| Flood prone soils | 3 percent of the area |
| High corrosion risk for uncoated steel | 96 percent of the area |
The USDA soil survey maps weathered bedrock within 60 inches in 7 percent of Midway, with typical bedrock depth at 48 inches; hard bedrock is not mapped in that depth range. Seasonal water tables are mapped within 60 inches in 10 percent, and flood prone soils cover 3 percent, so pits near Gin Creek need attention to water and channel depth. High steel corrosion risk is mapped across 96 percent, which matters for casing and tracer wire choices. The Yegua Formation, of Bartonian age, includes claystone and sandstone, so conditions can change along a bore.
What does it take to bore Midway’s clay loam?
Midway’s clay loam at about 40 inches can stay open and stick to the tooling. We adjust the fluid and reaming sequence to suit that mapped ground, whether the route runs near Gin Creek or Post Oak Loop.
- On a Zulch soil route, we use a thinner drilling fluid and polymer, then open the hole in stages to keep sticky clay from loading the reamer.
- Where clay loam is mapped at about 40 inches, we watch returns and pull the pipe soon after opening the hole so swelling clay has less time to grip it.
- Before a bore along Old San Antonio Road, we hydrovac expose each marked utility on the path; surface paint shows its position but not its depth.
- Near Gin Creek, we plan the bore depth beneath the channel and track the drill head from the surface, logging depth and pitch as it advances.

What does a bore have to cross in Midway near Texas State Highway 21?
Texas State Highway 21 has 2.0 mapped roadway miles inside Midway, so a route crossing it needs a bore plan built around the highway corridor. FM 247, FM 3060 and FM 2548 also run within the city limits. Old San Antonio Road and Osr are each mapped for 1.42 miles in the city, while Post Oak Loop covers 0.57 miles. Those streets give a route its local shape; a bore can pass beneath pavement rather than cut across the surface.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| Texas State Highway 21 | State highway | 2 roadway miles inside | State highway office |
| FM 247 | State highway | 1.1 roadway miles inside | State highway office |
| FM 3060 | State highway | 0.6 roadway miles inside | State highway office |
| FM 2548 | State highway | 0.2 roadway miles inside | State highway office |
| Gin Creek | Stream | 1.51 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Pine Branch | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
| Ivey Creek | Stream nearby | 0.2 miles outside | Checked for Corps of Engineers jurisdiction |
| Hackett Branch | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
| Cedar Lake Branch | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Midway or within 1 mile outside the limits, so the local crossing plan centers on roads and water rather than track. Gin Creek runs 1.51 channel miles through the city, and two mapped streets cross named streams. There are no lakes or ponds mapped within 1 mile. A proposed Gin Creek crossing needs a depth plan beneath the channel, and its jurisdiction is checked with the U.S. Army Corps of Engineers during planning.
Who approves a Midway bore in Madison County?
Midway’s city streets belong to the city, while work in the right of way of Texas State Highway 21, FM 247, FM 3060 or FM 2548 needs a TxDOT utility permit. The utility owner submits the application through TxDOT’s online RULIS system, and the Bryan District reviews it; we prepare the bore plan and profile for the owner’s filing and work under its permit. At a Texas State Highway 21 crossing, cover is at least 60 inches for electric and communication lines and water lines, and 60 inches for pressurized sewer. Along the right of way, the specified cover differs by line type. Existing highway pavement is crossed by boring or tunneling, and a Gin Creek crossing is checked for Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns the lines near the City of Midway water system?
The City of Midway owns the public water system, which draws from groundwater wells and serves 173 people through 148 service connections. For electric service in Madison County, reporting utilities are Entergy Texas, Houston County Electric Cooperative, Mid-South Electric Cooperative Association and Navasota Valley Electric Cooperative. The provider for an address along Old San Antonio Road must be identified before planning an electric conduit bore, since county reporting does not establish the owner at every location.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Midway | Public water system | Groundwater wells | 148 connections, 173 people served |
| Entergy Texas, Houston County Electric Cooperative, Mid-South Electric Cooperative Association and Navasota Valley Electric Cooperative | Electric utilities reporting service in Madison County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Midway’s median housing year at 1985; 9 percent of homes were built before 1960, 66 percent from 1960 to 1999 and 25 percent in 2000 or later. That mix can mean either an older line replacement or a newer service extension along Osr. Before drilling near a marked utility, we expose it with hydrovac because paint shows position, not depth. For a proposed bore beneath Old San Antonio Road, each marked line on the path gets pothole exposed before the drill approaches.

Where is Midway in relation to Madisonville?
Midway is in Madison County, 10.3 miles northeast of county seat Madisonville, and sits at an elevation of 247 feet. The incorporated city covers 1.59 square miles and uses ZIP code 75852. Leona is 15.7 miles northwest, Lovelady is 19.7 miles east, Bedias is 20.2 miles southwest and Centerville is 20.8 miles northwest. Huntsville is 25.4 miles southeast. From our Yukon yard, Midway is 367 road miles and a 7.1 hour drive, which factors into mobilization for work near Texas State Highway 21.
Places near Midway
- Directional boring in Madisonville: 10.3 miles southwest
- Directional boring in Leona: 15.7 miles northwest
- Directional boring in Lovelady: 19.7 miles east
- Directional boring in Bedias: 20.2 miles southwest
- Directional boring in Centerville: 20.8 miles northwest
- Directional boring in Huntsville: 25.4 miles southeast
What boring work comes up in Midway near Post Oak Loop?
- Highway crossing: A bore beneath Texas State Highway 21 keeps the route below pavement, with the utility owner’s TxDOT permit guiding the work.
- Water service: A connection near the City of Midway groundwater system needs a route that accounts for existing lines and the service destination.
- Fiber drop: A fiber route along Post Oak Loop can pass below the street surface, with marked utilities exposed before drilling near them.
- Creek crossing: A Gin Creek bore needs a planned depth beneath the channel and a jurisdiction check during planning.
- Street replacement: A water or sewer line beneath Old San Antonio Road can be bored rather than opened across the pavement.
- Electric conduit: A conduit route along Osr starts with confirming the line owner and locating marked utilities along the proposed path.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a Midway bore near Old San Antonio Road?
A map pin or address near Old San Antonio Road matters because the exact route can put a bore beside pavement, a utility or a drainage path. For a proposed crossing on FM 247, send us what is going in the ground, the pipe or conduit size, and the footage. A sketch or plans help us place the pits and understand the route through Midway.
Zulch soil and clay loam at about 40 inches make ground conditions a leading price factor because sticky material can affect reaming and pullback. The route’s crossings matter too: Texas State Highway 21, Gin Creek, marked utilities, concrete or pavement and drainage can add work. Pit size, excavator time and sand backfill also shape the scope. Mobilization is affected by Midway’s 367 road miles from Yukon, and high profile or emergency work changes the planning demands.
Questions people ask about boring in Midway
Does Trinity Boring Solutions take directional boring jobs in Midway and Madison County?
Yes. We take directional boring work in Midway and staff it with our own crews or crews from partner drilling contractors we have vetted. The service model does not depend on a local Midway office. From the first call through the bore log, you work with Trinity on a route near places such as Post Oak Loop.
Can you bore a line under Gin Creek in Midway?
A bore beneath Gin Creek can be planned around the channel, with depth and the creek bank included in the route plan. The crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. The creek runs 1.51 channel miles through Midway, so the exact crossing point matters.
As we plan boring in Madison County, who runs Midway’s public water system and where does the water come from?
The City of Midway owns the public water system, and groundwater wells supply it; we account for that when planning near School Road. Public records list 148 service connections serving 173 people. For a bore connecting to or replacing a water line, the specific route near Old San Antonio Road still needs to be checked against marked utilities.
Which electric provider should I check for a Midway, Madison County conduit bore?
Entergy Texas, Houston County Electric Cooperative, Mid-South Electric Cooperative Association and Navasota Valley Electric Cooperative report electric service in Madison County. That does not identify the owner at every Midway address. Confirm the line owner for the route near Texas State Highway 21 before conduit specifications and the bore plan are set.
Who is responsible for Post Oak Loop in Midway, and does it need to be cut?
Post Oak Loop is a city street, so the city owns its streets. A bore can often pass below the pavement instead of cutting across it, depending on the route and required approvals. Before drilling near marked lines along Post Oak Loop, we expose each line on the bore path.
How old are Midway homes and buried lines near Osr, and what does that mean for a replacement bore?
Midway’s median housing year is 1985, according to American Community Survey 2019 to 2023 five year estimates. That age profile can mean an older line needs replacement, but the route must be verified rather than assumed from housing age. Along Osr, marked utilities are exposed before the drill approaches.
Does Trinity cover Midway, Madisonville and rural sites outside the city?
Yes. We take work across Texas, including Midway, nearby Madisonville and rural sites outside the city limits. Madisonville is 10.3 miles southwest of Midway, and the service area is not limited to the incorporated boundary. A map pin helps us understand the site and its distance from our Yukon yard.
How much 811 notice does a Midway bore near Old San Antonio Road need?
Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For work near FM 3060, if our start moves more than 14 days past the original notice, we submit a new request. Worn or moved marks near Old San Antonio Road must be refreshed through Texas811 before work continues.
What affects the cost of a Midway bore under Texas State Highway 21?
The price depends on the route and work required, not just its length. Zulch soil and clay loam affect drilling effort; a Texas State Highway 21 crossing, Gin Creek, utilities, pavement, pits and backfill can add scope. Mobilization also matters because Midway is 367 road miles from the Yukon yard. We need the location and plans to assess those factors.
Where the Midway facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Midway
- U.S. Census Bureau, TIGER/Line 2024: Midway boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Midway
- U.S. Census Bureau, American Community Survey 2019 to 2023: Midway housing units and year built
- Macrostrat geologic map compilation: map units under Midway
- U.S. EPA Safe Drinking Water Information System: public water systems serving Midway
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Madison County
- U.S. Geological Survey, Elevation Point Query Service: Midway elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Midway
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Midway
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Midway, Texas
Type the address of your job in Midway. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Midway
Same county: Normangee. All counties: Texas county list.
