Normanna Texas Directional Boring: Blanconia Loamy Fine Sand, US 181, Medio Creek
Quick Answer: Blanconia loamy fine sand can cave behind the bit, so directional boring and horizontal directional drilling (HDD) for a Medio Creek crossing needs a supported hole. Trinity Boring Solutions takes this work in Normanna, Texas, including beneath US 181. Normanna is 529 road miles from our Yukon, Oklahoma main office, and Main Street is one local route a bore may serve. Fine sandy loam is common here; staged reaming helps keep the sandy ground open.
Normanna bores at a glance
- Unincorporated community in Bee County, Texas. Population 98 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 529 miles, about 10.2 hours of driving.
- Ground: Blanconia soil is mapped on 38 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 181. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Medio Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Which contractor handles directional boring near Medio Creek in Normanna?
Blanconia loamy fine sand can fall in behind a drill, so we plan the hole support before placing a line. Normanna is an unincorporated community in Bee County with 98 people in the 2020 Census count. We install water, sewer, gas, electric conduit and fiber, including service runs along Main Street or Bee Street where the route and line owner allow.
Our main office is in Yukon, Oklahoma, and Normanna work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our reach includes a roughly 4,100 foot bore with 48 inch pipe under the Arkansas River in Tulsa. A typical Normanna job beside that scale could be a shorter service run near Medio Creek, with Trinity handling the work from first call through bore log.

How does Blanconia soil affect a bore in Normanna?
The USDA soil survey maps Blanconia loamy fine sand across 38 percent of Normanna, followed by Papalote at 23 percent and Weesatche at 16 percent. Fine sandy loam is the leading surface texture at 54 percent, while loamy fine sand covers 38 percent. About 40 inches down, sandy clay loam is mapped under 55 percent of the area and sandy clay under 28 percent. Those mapped textures point to changing ground along a Main Street route, not uniform conditions from pit to pit.
| USDA soil survey, inside the Normanna mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Blanconia 38 percent, Papalote 23 percent, Weesatche 16 percent, Odem 10 percent and Clareville 4 percent |
| Texture at the surface | fine sandy loam 54 percent, loamy fine sand 38 percent and sandy clay loam 5 percent |
| Texture about 40 inches down | sandy clay loam 55 percent, sandy clay 28 percent and fine sandy loam 10 percent |
| Engineering class about 40 inches down | lean clay (CL) 44 percent, clayey sand (SC) 38 percent and silty sand (SM) 10 percent |
| Average clay content about 40 inches down | 28 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 45 percent of the area |
| Flood prone soils | 10 percent of the area |
| High corrosion risk for uncoated steel | 46 percent of the area |
The USDA soil survey does not map bedrock within 60 inches in Normanna, though that does not rule out rock deeper down. A seasonal water table is mapped within 60 inches across 45 percent of the area, so pits near Medio Creek may need pumping and wet sand needs care. Flood prone soils cover 10 percent, and high steel corrosion risk covers 46 percent, a concern for uncoated casing or tracer wire. The geologic map shows Holocene alluvial sand, silt, clay and gravel, so ground can vary along a creek crossing.
How do we bore Normanna’s sandy clay loam?
Normanna soil changes from loamy fine sand near the surface to sandy clay loam deeper down. We adjust fluid and reaming to the ground, while keeping the US 181 route and nearby utilities in view.
- Blanconia loamy fine sand can cave behind the bit, so we use drilling fluid to support the hole and ream in stages before pulling pipe.
- Where sandy clay loam appears deeper down in Normanna, we watch for sticky cuttings and plan the pull so pipe is ready when the hole is opened.
- The seasonal water table mapped near Medio Creek can fill pits; we keep pits small and pump as needed, especially where wet sand flows.
- Before approaching a marked utility along Main Street, we hydrovac pothole to expose it, then track the drill head and log depth and pitch.

Where might a Normanna line go under US 181?
US 181 runs for 1.7 mapped roadway miles inside the Normanna community boundary, and no other highway is mapped within 1.5 miles outside it. A line beneath the highway calls for a bore rather than an open cut through existing pavement. Main Street has 0.82 miles mapped in the community, Bee Street has 0.55 miles and Live Oak Street has 0.43 miles. Their road and driveway approaches can shape pit placement and the bore path.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 181 | US highway | 1.7 roadway miles inside | State highway office |
| Medio Creek | Stream | 3.37 channel miles inside | Checked for Corps of Engineers jurisdiction |
| San Domingo Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Dougherty Reservoir | Lake or pond | 8 acres, nearby | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside the Normanna community boundary or within 1 mile outside it, so a local track crossing is not part of the mapped route. Medio Creek has 3.37 channel miles inside the community, with three mapped street crossings of named streams. San Domingo Creek runs along or touches the boundary. Dougherty Reservoir, an 8 acre pond, is within 1 mile but outside the community. A Medio Creek bore needs a route that stays below the channel.
Who approves a Normanna bore in Bee County?
Normanna is an unincorporated community, so it has no city government; street authority rests with the county or state. For work in the US 181 right of way, the line owner, not the driller, submits the utility application through TxDOT’s RULIS system. We give the owner the bore plan and profile, and the TxDOT Corpus Christi District reviews it. TxDOT rules call for electric and communication lines to have 60 inches of cover at a highway crossing, water lines 60 inches, and pressurized sewer lines 60 inches. A permitted depth may differ.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Whose lines may already be buried in Normanna, Bee County?
The water provider for a specific address in Normanna has to be confirmed with Bee County or the local water district before a bore is planned. Public records do not tie a named water system to this community. AEP Texas Central, Karnes Electric Cooperative and San Patricio Electric Cooperative report electric service in Bee County, but the line owner for a Main Street conduit route must be confirmed before planning the bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| AEP Texas Central, Karnes Electric Cooperative and San Patricio Electric Cooperative | Electric utilities reporting service in Bee County | EIA Form 861 | Confirm the line owner by address |
Housing figures are not published for a place as small as Normanna, so a Main Street job could involve a long service run as readily as a new connection. September averages 4.3 inches of rain in Bee County, compared with 1.6 inches in February, which can affect wet pits and sandy ground. We pothole every marked utility on a Bee Street bore path before drilling near it; paint shows position, not depth.

Where is Normanna in relation to Tuleta?
Normanna is in Bee County, at an elevation of 271 feet, and covers 1.34 square miles. Its ZIP codes are 78142 and 78104. Tuleta is 3.5 miles north, while Pettus is 6.3 miles north. Beeville, the county seat and nearest larger city, is 8.7 miles south. From our Yukon, Oklahoma main office, the drive to Normanna is 529 road miles and 10.2 hours. That distance is one part of planning a bore near Main Street or US 181.
Places near Normanna
- Directional boring in Tuleta: 3.5 miles north
- Directional boring in Pettus: 6.3 miles north
- Directional boring in Tulsita: 8.2 miles north
- Directional boring in Beeville: 8.7 miles south
- Directional boring in Blue Berry Hill: 9.8 miles south
Which jobs call for a bore near Bee Street in Normanna?
- Highway crossing: A line under US 181 uses a bore beneath the travel lanes, keeping the existing highway surface uncut.
- Water service: A service route near Main Street needs the address specific water provider confirmed before its line is planned.
- Fiber conduit: A conduit run along Bee Street can be bored past paved approaches without cutting the road surface.
- Creek crossing: A route under Medio Creek needs depth planning below the channel and a check for federal jurisdiction during planning.
- Drainage crossing: A line near San Domingo Creek has to account for the channel that runs along or touches the community boundary.
- Neighborhood service: A route near Live Oak Street can use directional boring to avoid open cuts across the existing road.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
How do I get a quote for Normanna work near Main Street?
For a Main Street request, send the address or map pin, what will go in the ground, pipe or conduit size and footage. A sketch or plans help us see how the route relates to Bee Street or US 181. Those details show whether the job is a service run, a road crossing or a longer line.
Blanconia loamy fine sand and the deeper sandy clay loam matter first because they affect hole support and reaming. The route and number of utilities to expose also shape the work, especially near US 181 or Medio Creek. Pipe size and footage, concrete or pavement, pits, excavator time and sand backfill add to the scope. A job in Normanna also needs mobilization planning from Yukon, 529 road miles away.
Questions people ask about boring in Normanna
Does Trinity take directional boring jobs in Normanna and Bee County?
Yes. We take directional boring work in Normanna and across Texas, with our own crews and vetted partner contractor satellite yards supporting the work. Normanna is an unincorporated Bee County community, so a job near Main Street is planned around the actual route and line owner. Trinity remains your contact from the first call through the bore log.
What ground should I expect for a Normanna bore near Blanconia soil?
The USDA soil survey maps Blanconia loamy fine sand across 38 percent of Normanna. At about 40 inches down, sandy clay loam is mapped across 55 percent of the area, with sandy clay also present. Sand can cave behind the bit, while clay can cling to the reamer, so the drilling plan may change along a Bee Street route.
Will a Normanna bore hit rock?
Bedrock is not mapped within 60 inches in Normanna, but that does not establish what lies deeper. The geologic map shows Holocene alluvial sand, silt, clay and gravel around features such as Medio Creek. We use the site conditions and bore path to plan rather than treating the map as a test boring.
Who approves a Normanna bore under US 181?
The utility line owner files the TxDOT right of way application through RULIS, and the TxDOT Corpus Christi District reviews it. For a Normanna crossing under US 181, we provide the owner with the bore plan and profile. TxDOT’s utility rules set cover requirements, and the permit can specify a different depth.
Can a line be bored under Medio Creek in Normanna?
A bore can be planned beneath Medio Creek, but the route and depth must suit the channel and the site ground. The creek has 3.37 channel miles inside the Normanna community boundary, and flood prone soils are mapped across 10 percent of the area. Planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
Who owns electric lines in Normanna, Bee County, and who confirms conduit details?
AEP Texas Central, Karnes Electric Cooperative and San Patricio Electric Cooperative report electric service in Bee County. That does not identify the owner at every Normanna address. The specific line owner needs to be confirmed before a conduit bore along Main Street, and that owner can confirm the conduit requirements for the line.
Does Trinity cover Tuleta and rural sites outside Normanna?
Yes. We take work in Texas beyond Normanna, including nearby Tuleta and rural routes outside the mapped community boundary. Tuleta is 3.5 miles north of Normanna, and Beeville is 8.7 miles south. The route, line type and site access help determine the crew and equipment plan.
How much notice does Texas811 need for a Normanna bore near Main Street?
Texas law requires a locate request at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a Main Street bore, Texas811 describes this as at least two working days. If the start moves more than 14 days past the original notice, make a new request; refresh worn or moved marks before work continues.
What affects the cost of directional boring in Normanna near US 181?
The job scope sets the price. Blanconia loamy fine sand and deeper sandy clay loam affect drilling time and hole support, while US 181 or Medio Creek crossings add route and access demands. Pipe size, bore length, utility exposures, pavement, pits, backfill and mobilization from Yukon also affect the work. We assess those factors from the plans and site details.
Where the Normanna facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Normanna
- U.S. Census Bureau, TIGER/Line 2024: Normanna boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Normanna population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Normanna housing units and year built
- Macrostrat geologic map compilation: map units under Normanna
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Bee County
- U.S. Geological Survey, Elevation Point Query Service: Normanna elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Normanna
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Normanna
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Normanna, Texas
Type the address of your job in Normanna. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Normanna
Same county: Skidmore · Tynan · Pawnee. All counties: Texas county list.
