Skidmore Texas Directional Boring: Orelia Fine Sandy Loam, US 181 and Aransas River
Quick Answer: Orelia fine sandy loam is common around Skidmore, and directional boring, also called horizontal directional drilling (HDD), can carry a line beneath US 181 without cutting its pavement. Skidmore sits 550 road miles from our Yukon, Oklahoma main office, while Corrigan Road runs 4.07 miles inside the mapped community boundary. At about 40 inches, sandy clay loam is widespread, so sticky cuttings can build on the reamer. Staged reaming and a ready pipe help keep the hole stable along Corrigan Road.
Skidmore bores at a glance
- Unincorporated community in Bee County, Texas. Population 863 (2020 Census count).
- Road distance from our Yukon, Oklahoma main office: 550 miles, about 10.7 hours of driving.
- Ground: Orelia soil is mapped on 43 percent of the area, with sandy clay loam about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: US 181, FM 797 and Texas State Highway 359. State permit office: TxDOT Corpus Christi District.
- Railroad track inside the boundary: none mapped.
- Named streams inside the boundary: Aransas River, Olmos Creek and West Aransas Creek.
- Public water: Skidmore Water Supply Corporation, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who handles directional boring near US 181 in Skidmore?
Orelia fine sandy loam is the leading mapped soil in Skidmore, and it can shed sand into an open bore. The Census Bureau counted 863 people in this unincorporated community in 2020; it does not publish annual population estimates for places like this. We install water, sewer, gas, electric conduit and fiber lines along routes such as US 181 and FM 797, with the line and crossing details set for each job.
Our main office is in Yukon, Oklahoma, and Skidmore work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa, Oklahoma; that reach puts a Skidmore crossing near US 181 in perspective. Trinity is a family business started in 1965, with directional boring since 1982.

What is Orelia soil like to bore in Skidmore?
The USDA soil survey maps Orelia fine sandy loam across 43% of Skidmore. Fine sandy loam is the leading surface texture, mapped over 78% of the area. At about 40 inches below the surface, sandy clay loam covers 73%, and the average clay content there is 29%. These are mapped soil patterns, not test boring results. That mix can cut readily but may loosen behind the drill head; clay in the deeper mix can also cling to the reamer. Conditions along a specific stretch of Corrigan Road still need field checking.
| USDA soil survey, inside the Skidmore mapped community boundary | What is mapped |
|---|---|
| Soil series mapped | Orelia 43 percent, Papalote 27 percent, Blanconia 8 percent, Weesatche 6 percent and Pernitas 4 percent |
| Texture at the surface | fine sandy loam 78 percent, sandy clay loam 12 percent and loamy fine sand 8 percent |
| Texture about 40 inches down | sandy clay loam 73 percent and sandy clay 18 percent |
| Engineering class about 40 inches down | clayey sand (SC) 53 percent, lean clay (CL) 38 percent and fat clay (CH) 4 percent |
| Average clay content about 40 inches down | 29 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 10 percent of the area |
| Flood prone soils | 4 percent of the area |
| High corrosion risk for uncoated steel | 14 percent of the area |
The USDA soil survey maps no bedrock within the top 60 inches in Skidmore, though that does not establish conditions deeper down. A seasonal water table is mapped within 60 inches across 10% of the area, so pits may need pumping. Flood prone soils cover 4%, making creek route depth a planning concern. High steel corrosion risk is mapped across 14%; the line owner chooses any casing or tracer wire protection. The Lissie formation, of Pleistocene age, includes sand, silt, clay and minor gravel, so local ground can change along a bore.
How do crews bore Skidmore’s sandy clay loam?
Skidmore’s sandy clay loam at about 40 inches can hold cuttings on a reamer. We adjust the drilling fluid and the reaming sequence to the ground, including the Orelia soil mapped across much of the community.
- In Orelia fine sandy loam, we use drilling fluid to help support the sandy cut, then ream in stages so loose ground does not cave behind the bit.
- Sandy clay loam is widespread at about 40 inches in Skidmore; we watch for sticky cuttings and plan to pull the pipe soon after opening the bore.
- Where a seasonal water table is mapped near 1st Street, we keep pits practical in size and pump if water collects during the work.
- Before drilling near a marked line along Corrigan Road, we hydrovac pothole to expose it; a walkover locator tracks the head and logs depth and pitch.

What is in the way of a new line in Skidmore near Corrigan Road?
US 181 runs 4.1 mapped roadway miles inside the community boundary, alongside 2.9 miles of FM 797 and 0.8 miles of Texas State Highway 359. Corrigan Road is the longest named street at 4.07 miles. 1st Street runs 1.67 miles, while 2nd Street and Sullivan Street run 1.1 and 1.09 miles. These routes shape access and crossing plans. A bore beneath a state highway needs a permitted route and the cover depth set for the line type.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 181 | US highway | 4.1 roadway miles inside | State highway office |
| FM 797 | State highway | 2.9 roadway miles inside | State highway office |
| Texas State Highway 359 | State highway | 0.8 roadway miles inside | State highway office |
| Aransas River | Stream | 3.82 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Olmos Creek | Stream | 2.36 channel miles inside | Checked for Corps of Engineers jurisdiction |
| West Aransas Creek | Stream | 1.68 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Poesta Creek | Stream nearby | Along the boundary | Checked for Corps of Engineers jurisdiction |
| Corrigan Hole | Stream nearby | 0.4 miles outside | Checked for Corps of Engineers jurisdiction |
| Ratta Creek | Stream nearby | 0.5 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Skidmore or within one mile outside the community boundary, so no local track crossing is shown. Five mapped street crossings intersect named streams. The Aransas River runs 3.82 channel miles inside the community; Olmos Creek and West Aransas Creek also pass through. A line crossing one of these waterways needs a route review for possible Corps jurisdiction. No lakes or ponds are mapped within one mile.
Who approves a Skidmore bore in Bee County?
Skidmore is an unincorporated census designated place, so it has no city government. Bee County is responsible for local streets such as Corrigan Road; state routes including US 181, FM 797 and Texas State Highway 359 fall under TxDOT. For electric and communication lines crossing a state highway, the cover depth is at least 60 inches below the lowest point of the crossed grade; water also needs 60 inches, and pressurized sewer needs 60 inches. The line owner files the utility application in TxDOT’s online RULIS system for review by the Corpus Christi District. We provide the bore plan and profile and work under the utility owner’s permit. A crossing of the Aransas River or another creek is checked for possible Corps jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Who owns lines in Skidmore near Skidmore Water Supply Corporation?
Skidmore Water Supply Corporation uses groundwater wells and reports 259 service connections serving 777 people. That gives a water service route a local system to coordinate with, but the line owner and location still need confirmation. AEP Texas Central, Karnes Electric Cooperative and San Patricio Electric Cooperative report electric service in Bee County; none should be assumed to serve every address. We confirm the electric line owner before planning a conduit bore near US 181.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Skidmore Water Supply Corporation | Public water system | Groundwater wells | 259 connections, 777 people served |
| AEP Texas Central, Karnes Electric Cooperative and San Patricio Electric Cooperative | Electric utilities reporting service in Bee County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 estimates put Skidmore’s median housing year at 1982. Seventeen percent of homes were built before 1960, 74% from 1960 to 1999 and 9% in 2000 or later. Housing age does not establish buried pipe age, but replacement bores may run beside older services. Near 1st Street, we expose marked utilities with hydrovac before drilling close; surface paint shows position, not depth.

How far is Skidmore from Tynan and our Yukon yard?
Skidmore is in Bee County, at an elevation of 132 feet, and covers 10.55 square miles within its mapped community boundary. Its ZIP code is 78389. Tynan is 7.8 miles southwest; Beeville, the county seat and nearest larger city, is 10.2 miles north. Blue Berry Hill lies 10.4 miles northwest. Our Yukon, Oklahoma yard is 550 road miles away, a drive of 10.7 hours. That distance matters to mobilization for a bore near US 181, so the route and scope help us plan the trip.
Places near Skidmore
- Directional boring in Tynan: 7.8 miles southwest
- Directional boring in Beeville: 10.2 miles north
- Directional boring in Blue Berry Hill: 10.4 miles northwest
- Directional boring in St. Paul: 14.3 miles southeast
- Directional boring in Mathis: 14.7 miles southwest
What would we bore near 1st Street in Skidmore?
- Highway crossing: A water or communication line beneath US 181 needs a planned bore profile that meets the applicable TxDOT cover depth.
- Water service: A service route near Skidmore Water Supply Corporation needs coordination with the owner of the existing groundwater system line.
- Street replacement: A bore along 1st Street can carry replacement pipe beneath pavement, with hydrovac exposure where marked utilities cross the path.
- Creek crossing: A route beneath the Aransas River needs depth planning and a check for possible Corps jurisdiction.
- Fiber route: A conduit bore along FM 797 can avoid opening the roadway while connecting the planned route between identified endpoints.
- Local street crossing: A bore beneath Corrigan Road can pass under pavement, with access and pit locations planned for the specific site.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote work near Sullivan Street in Skidmore?
For a route near Sullivan Street, tell us where the bore starts and ends, what line is going in, its pipe or conduit size and the footage. An address or map pin locates the work near US 181 or a creek. A sketch or plans help show the route, pits and crossings before we scope the job.
Price follows the job conditions, not just the footage. Orelia soil and sandy clay loam affect drilling and reaming; a crossing beneath US 181 adds highway permit and cover planning. Creek crossings, marked utilities to expose, pavement, pit space and excavator time also shape the work. Mobilization matters because Skidmore is 550 road miles from our Yukon yard. High profile or emergency work can add planning needs.
Questions people ask about boring in Skidmore
Does Trinity take directional boring work in Skidmore and Bee County?
Yes. We take directional boring work in Skidmore and staff it with our own crews or through satellite yards operated by drilling partners we have vetted. One Trinity contact handles the request through the bore log, even when a partner yard supplies the drilling crew. That service model applies to Bee County routes near US 181.
Who controls 2nd Street in Skidmore, and does a bore have to cut it?
Skidmore has no city government because it is an unincorporated census designated place; Bee County is responsible for local streets such as 2nd Street. A directional bore can pass beneath the pavement without an open cut, subject to the route, approvals and utility exposure needed for the specific job.
What does Skidmore housing age near 1st Street mean for replacement bores?
American Community Survey 2019 to 2023 estimates give Skidmore a median housing year of 1982, with 17% of homes built before 1960. Those figures do not date the buried lines near 1st Street. For a replacement bore, we locate and expose marked utilities before drilling near them so the route can account for what is actually underground.
Can groundwater or flood prone ground affect a Skidmore bore near the Aransas River?
It can affect pit planning. The USDA soil survey maps a seasonal water table within 60 inches across 10% of Skidmore and flood prone soils across 4%. Near the Aransas River, we plan the bore depth around the channel and manage pits if water enters them; the crossing is also checked for possible Corps jurisdiction.
What ground does a bore pass through in Skidmore’s Orelia soil?
The USDA soil survey maps Orelia fine sandy loam over 43% of Skidmore. At about 40 inches, sandy clay loam is mapped across 73% of the area. Those are survey patterns rather than test borings. The loose sandy portion can cave behind a drill head, while clay can cling to the reamer, so staged reaming and fluid control matter.
Will a directional bore in Skidmore hit rock?
The USDA soil survey maps no bedrock in Skidmore’s top 60 inches, but that does not determine what lies deeper. The geologic map includes the Pleistocene Lissie formation and alluvial sand, silt and clay. A route near Olmos Creek still needs site specific planning because mapped regional units do not establish conditions at an individual bore.
How does the distance from Beeville affect a Skidmore boring job?
Beeville is 10.2 miles north of Skidmore, but our main office in Yukon, Oklahoma is 550 road miles away, a 10.7 hour drive. That distance can affect mobilization and scheduling. We scope a route near FM 797 or another local feature before deciding the crew and equipment plan.
How much Texas811 notice is needed for a Skidmore bore near Corrigan Road?
For a bore near Corrigan Road, submit the Texas811 locate request at least two working days before excavation, excluding Saturdays, Sundays and legal holidays. The request cannot be made earlier than 14 days before the start. If the start slips more than 14 days, make a new request; have worn or moved marks refreshed before work continues.
What affects the cost of a directional bore in Skidmore near US 181?
The job scope sets the price. Orelia soil, bore length, pipe size, pavement and the utilities to expose all matter. A crossing under US 181 adds highway planning, while an Aransas River route adds water crossing review. Pit work, excavator time and mobilization from Yukon also affect the plan. The details of the particular route determine the work.
Where the Skidmore facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Skidmore
- U.S. Census Bureau, TIGER/Line 2024: Skidmore boundary, roads, rail lines and streams
- U.S. Census Bureau, 2020 Census: Skidmore population count
- U.S. Census Bureau, American Community Survey 2019 to 2023: Skidmore housing units and year built
- Macrostrat geologic map compilation: map units under Skidmore
- U.S. EPA Safe Drinking Water Information System: public water systems serving Skidmore
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Bee County
- U.S. Geological Survey, Elevation Point Query Service: Skidmore elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Skidmore
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Skidmore
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Skidmore, Texas
Type the address of your job in Skidmore. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
