Rocksprings Texas Directional Boring: Prade Soil, US 377 and Indian Creek
Quick Answer: At about 40 inches, what lies below the top five feet near US 377? The USDA soil survey maps very cobbly clay over cemented material, with bedrock within 60 inches on 19 percent of Rocksprings. Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for lines crossing US 377 and town streets. The Yukon main office is 486 road miles away, so a Nueces Street bore needs mobilization included in the plan. Prade soil covers 80 percent of the mapped area; clay can grip tooling, so staged reaming matters.
Rocksprings bores at a glance
- County seat of Edwards County, Texas. Population 847 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 486 miles, about 9.8 hours of driving.
- Ground: Prade soil is mapped on 80 percent of the area, with cemented material about 40 inches down.
- Rock: bedrock is mapped within 60 inches on 19 percent of the area.
- Highways inside the boundary: US 377 and Texas State Highway 55. State permit office: TxDOT San Angelo District.
- Railroad track inside the boundary: none mapped.
- Public water: City of Rocksprings, groundwater wells.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who can I call for directional boring near Nueces Street in Rocksprings?
We take directional boring work in Rocksprings, the Edwards County seat. The Census Bureau Vintage 2024 estimate puts the town population at 847. Along streets such as Nueces Street, we install water, sewer, gas, electric conduit and fiber lines by boring below the surface, with the route and crossings planned for the specific address.
Our main office is in Yukon, Oklahoma, and Rocksprings work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have done directional boring since 1982. For a service line along Nueces Street, our range runs from 3/4 inch lines to 48 inch casing, with bore lengths from 10 feet to 5,000 feet.

What ground does a bore meet in Rocksprings Prade soil?
The USDA soil survey maps Prade-Eckrant complex across 80 percent of Rocksprings, with very cobbly clay at the surface. Eckrant-Rock outcrop complex accounts for 14 percent and Valera clay for 6 percent. Around 40 inches down, cemented material is mapped across 80 percent of the area, and the average clay content at that depth is 48 percent. We use Prade, Eckrant, and Valera as mapped soil patterns, not as test borings. Clay can cling to a reamer and grip pipe, so the bore plan needs room for staged reaming and a controlled pull.
| USDA soil survey, inside the Rocksprings city limits | What is mapped |
|---|---|
| Soil series mapped | Prade 80 percent, Eckrant 14 percent and Valera 6 percent |
| Texture at the surface | very cobbly clay 80 percent, very cobbly silty clay 14 percent and clay 6 percent |
| Texture about 40 inches down | cemented material 80 percent and bedrock 19 percent |
| Average clay content about 40 inches down | 48 percent |
| Bedrock mapped within 60 inches | 19 percent of the area (19 percent hard rock, 0 percent weathered rock) |
| Seasonal water table within 60 inches | 0 percent of the area |
| Flood prone soils | 0 percent of the area |
| High corrosion risk for uncoated steel | 100 percent of the area |
Bedrock is mapped within 60 inches on 19 percent of Rocksprings, with a typical depth of 17 inches where mapped. The USDA geologic map names Buda Limestone and Del Rio Clay, undivided, of Cenomanian age; contact between soil and harder limestone can steer the head off line. We account for Indian Creek when planning, while recognizing seasonal water tables and flood prone soils are not mapped. High steel corrosion risk covers the mapped area, so the line owner should consider casing and tracer wire materials or coatings; HDPE is not affected by that steel corrosion concern.
How do crews bore Rocksprings cemented material?
The mapped clay and cemented material around Rocksprings call for careful reaming, fluid control and steering checks. We plan the pits and pull around the street surface, then adjust the tooling to the ground encountered.
- Prade soil is mapped as very cobbly clay, so we ream in stages and manage fluid to keep sticky cuttings from loading the tooling.
- With cemented material mapped around 40 inches down, we track the drill head by walkover locator and log depth and pitch as the bore advances.
- Before drilling near marked utilities on Cedar Street, we expose each one on the bore path with hydrovac potholing because paint does not show depth.
- For a line near Price Street, we set pits in dirt on either side and pull pipe the same day the hole is opened to limit clay gripping the pipe.

What might a bore cross in Rocksprings near US 377?
US 377 and Texas State Highway 55 run through Rocksprings, with 1.6 mapped roadway miles of US 377 and 1.5 of the state highway inside town. A crossing beneath either route needs a bore plan that fits the highway right of way. The longest named streets include Nueces Street at 1.1 miles, Well Street at 1.06 miles and Cedar Street at 1.0 mile. Price Street adds another 0.99 miles, giving a local route plenty of possible pavement and driveway approaches to plan around.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| US 377 | US highway | 1.6 roadway miles inside | State highway office |
| Texas State Highway 55 | State highway | 1.5 roadway miles inside | State highway office |
| Indian Creek | Stream nearby | 0.8 miles outside | Checked for Corps of Engineers jurisdiction |
No railroad is mapped inside Rocksprings or within one mile outside its limits, and no street and rail crossings are mapped in town. No named stream runs through town; Indian Creek is 0.8 miles from the limits, while 1.43 miles of unnamed drainage are mapped within them. No street crossings of named streams are mapped in town, and no lakes or ponds are mapped within one mile. A proposed bore near Indian Creek would need its route considered as a water crossing during planning.
Who approves a Rocksprings bore in Edwards County?
Rocksprings is incorporated, so its streets, including Cedar Street and Price Street, belong to the town rather than Edwards County. For work in the right of way of US 377 or Texas State Highway 55, the utility line owner, not the drilling contractor, applies through TxDOT’s RULIS system. The TxDOT San Angelo District reviews that filing; we give the line owner a bore plan and profile and work under the permit issued to that owner. At state highway crossings, electric and communication lines need 60 inches of cover below the lowest crossed grade, while water lines need 60 inches and pressurized sewer lines need 60 inches. Along the right of way, electric and communication lines need 48 inches and water lines need 36 inches. For US 377 pavement crossings, we follow TxDOT rules calling for boring or tunneling beneath existing highway pavement. The permit can set a different depth, and rural highway bores extend beneath all travel lanes. Indian Creek is outside town, but a proposed water crossing there is checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
Which utilities serve Rocksprings through the City of Rocksprings system?
The City of Rocksprings public water system draws from groundwater wells and serves 1,662 people through 554 service connections. For electric conduit, public records list AEP Texas Central, AEP Texas North, Medina Electric Cooperative, Pedernales Electric Cooperative, Rio Grande Electric Cooperative and Southwest Texas Electric Cooperative as reporting service in Edwards County. We confirm the line owner for a proposed conduit bore near Well Street before planning the route; the county list does not establish which utility serves a particular address.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| City of Rocksprings | Public water system | Groundwater wells | 554 connections, 1,662 people served |
| AEP Texas Central, AEP Texas North, Medina Electric Cooperative, Pedernales Electric Cooperative, Rio Grande Electric Cooperative and Southwest Texas Electric Cooperative | Electric utilities reporting service in Edwards County | EIA Form 861 | Confirm the line owner by address |
American Community Survey 2019 to 2023 five year estimates put the median housing year in Rocksprings at 1957; 60 percent of homes were built before 1960, 32 percent from 1960 to 1999 and 8 percent in 2000 or later. A replacement line near Cedar Street may need to connect with older buried services, while a newer service can follow a different route. We hydrovac pothole each marked utility on the bore path before drilling near it, since paint shows position, not depth.

Do you cover Rocksprings and nearby Camp Wood?
Rocksprings is the Edwards County seat, at an elevation of 2,379 feet, and covers 1.22 square miles. Its ZIP code is 78880. Barksdale is 22.4 miles southeast, Camp Wood is 26.9 miles southeast, and Leakey is 33.7 miles southeast; Junction is 42.0 miles northeast. The town received its name from natural springs associated with porous limestone in the area. From our Yukon, Oklahoma main office, Rocksprings is 486 road miles and 9.8 drive hours away, which makes distance part of planning mobilization for a job near US 377.
Places near Rocksprings
- Directional boring in Barksdale: 22.4 miles southeast
- Directional boring in Camp Wood: 26.9 miles southeast
- Directional boring in Leakey: 33.7 miles southeast
- Directional boring in Junction: 42 miles northeast
What would we bore near Indian Creek in Rocksprings?
- Highway crossing: A bore beneath US 377 keeps the roadway surface uncut, with the utility owner arranging the TxDOT permit.
- Water service: A connection near Well Street can tie into the City of Rocksprings groundwater system after the route and existing lines are checked.
- Fiber conduit: A run along Nueces Street can pass below pavement and driveways, with marked utilities exposed before drilling near them.
- Creek crossing: A proposed line near Indian Creek needs a planned route and a check for U.S. Army Corps of Engineers jurisdiction.
- Street replacement: A sewer or water line beneath Cedar Street can replace an older buried run without opening the street surface.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What should I send for a Rocksprings bore near Price Street?
For a bore near Price Street, send the address or map pin, what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see how the route sits against nearby streets and crossings before we scope the work.
A straightforward route along Price Street with clear access and few crossings is simpler to plan. The answer changes with bore length, pipe or conduit size, Prade soil and the cemented material mapped below it, plus the number of utilities to expose. Pavement or concrete, pits, excavator time, sand backfill and any creek or drainage crossing also affect the scope. A US 377 right of way adds permit planning, and the 486 road miles from Yukon affect mobilization.
Questions people ask about boring in Rocksprings
Does Trinity take directional boring work in Edwards County Rocksprings, and who staffs it?
Yes. We take directional boring work in Rocksprings and staff it with our own crews or crews from satellite yards run by drilling contractors we have vetted. Our Yukon office remains your contact from the first call through the bore log, including work planned near Cedar Street in Edwards County.
Who owns electric lines in Rocksprings, Edwards County, and who confirms conduit specs?
The county records list AEP Texas Central, AEP Texas North, Medina Electric Cooperative, Pedernales Electric Cooperative, Rio Grande Electric Cooperative and Southwest Texas Electric Cooperative as reporting electric service. We confirm the actual line owner and conduit requirements for the address before planning a bore near Well Street.
Does the town or county control Cedar Street in Rocksprings, and must a bore cut it?
Cedar Street is within incorporated Rocksprings, so the town controls its streets rather than Edwards County. A directional bore can place a line beneath the street without cutting its pavement. We still plan pits and expose marked utilities along the route before the drill approaches them.
How old are homes and buried lines near Well Street in Rocksprings?
American Community Survey 2019 to 2023 five year estimates give Rocksprings a median housing year of 1957, with 60 percent of homes built before 1960. That does not date any particular buried line, so a replacement bore near Well Street needs marked utilities exposed before drilling and the route checked against what is found.
Does Prade soil in Rocksprings create a steel corrosion concern, and what pipe is used?
The USDA soil survey maps high steel corrosion risk across Rocksprings, including the area dominated by Prade-Eckrant complex. The line owner selects materials and coatings for steel casing or tracer wire. HDPE is not affected by that steel corrosion concern, but the material choice depends on the line design.
What does a bore pass through in Rocksprings Prade soil?
The USDA soil survey maps very cobbly clay at the surface across 80 percent of Rocksprings, with cemented material mapped across 80 percent around 40 inches down. Bedrock is mapped within 60 inches across 19 percent. These are mapped patterns, not test borings, so the actual bore plan must account for conditions encountered.
Can I reach Trinity after hours about an urgent bore near Cedar Street in Rocksprings?
Yes. A person answers our phone at (405) 409-7423 24 hours a day for urgent work. Tell us where the Cedar Street job is, what line needs to go in and what access or crossing constraints are known, so we can understand the request.
How early should I call 811 for a bore near Nueces Street in Rocksprings?
Texas811 needs a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days ahead. If work near Nueces Street slips more than 14 days past the original notice, make a new request. If marks wear off or move, have Texas811 refresh them before work continues.
What affects the cost of directional boring beneath US 377 in Rocksprings, where surface soils are very cobbly clay?
The scope sets the price: length, pipe or conduit size, Prade soil and cemented material, utilities to expose, pavement, pits and excavator time all matter. A US 377 crossing adds highway permit and cover planning, while creek or drainage crossings and mobilization from Yukon can also change the work involved.
Where the Rocksprings facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Rocksprings
- U.S. Census Bureau, TIGER/Line 2024: Rocksprings boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Rocksprings
- U.S. Census Bureau, American Community Survey 2019 to 2023: Rocksprings housing units and year built
- Macrostrat geologic map compilation: map units under Rocksprings
- U.S. EPA Safe Drinking Water Information System: public water systems serving Rocksprings
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Edwards County
- U.S. Geological Survey, Elevation Point Query Service: Rocksprings elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Rocksprings
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Rocksprings
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Rocksprings, Texas
Type the address of your job in Rocksprings. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Rocksprings
All counties: Texas county list.
