trinityboringsolutions.com

Windcrest Texas Directional Boring: Branyon Clay, FM 1976 and Walzem Creek

Quick Answer: For a bore near FM 1976, confirm the water provider for the address with the city, Bexar County or the local water district; several utilities report electric service in the county. Trinity Boring Solutions takes directional boring, also called horizontal directional drilling (HDD), in Texas for routes near Crestway Drive. Our Yukon, Oklahoma main office is 469 road miles from Windcrest, and Union Pacific track lies 0.1 miles beyond the city limits. USDA maps show heavy Branyon clay, which can cling to the reamer, so we stage the passes and watch the drilling fluid.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Windcrest bores at a glance

  • Incorporated city in Bexar County, Texas. Population 5,782 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 469 miles, about 9 hours of driving.
  • Ground: Branyon soil is mapped on 33 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 26 percent of the area.
  • Highways inside the boundary: FM 1976. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Walzem Creek and Rosillo Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Windcrest near Union Pacific?

For work along FM 1976 or Crestway Drive, the Census Bureau Vintage 2024 estimate counts 5,782 Windcrest residents in Bexar County. We install water, sewer, gas, electric conduit and fiber where a route along these streets or other Windcrest roads needs to reach a property. The line owner and existing utilities affect where we can safely place a new bore.

Our main office is in Yukon, Oklahoma, and Windcrest work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business began in 1965, and we have drilled directionally since 1982. We have gone more than 25 years without a utility strike, a record that matters when planning around existing lines near Crestway Drive and Walzem Creek.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What is Windcrest ground like near Branyon soil?

The USDA soil survey maps Branyon soil across 33 percent of Windcrest, with Houston Black at 28 percent and Austin at 20 percent. Branyon clay is mapped in two slope classes, covering 20 percent and 13 percent of the area. At about 40 inches below the surface, clay is mapped across 74 percent of the area, and the average clay content at that depth is 53 percent. Surface soils are mostly clay, silty clay and gravelly clay. These mapped patterns point to sticky cuttings that can build up on a reamer, not to conditions proved by test borings.

USDA soil survey, inside the Windcrest city limitsWhat is mapped
Soil series mappedBranyon 33 percent, Houston Black 28 percent, Austin 20 percent, Heiden 13 percent and Eddy 4 percent
Texture at the surfaceclay 56 percent, silty clay 20 percent and gravelly clay 18 percent
Texture about 40 inches downclay 74 percent and bedrock 26 percent
Engineering class about 40 inches downfat clay (CH) 74 percent
Average clay content about 40 inches down53 percent
Bedrock mapped within 60 inches26 percent of the area (0 percent hard rock, 26 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils1 percent of the area
High corrosion risk for uncoated steel96 percent of the area

The USDA soil survey maps bedrock within 40 inches across 26 percent of Windcrest, with a typical mapped depth of 24 inches. The map also shows weathered bedrock within 60 inches in 26 percent of the area, so a route may shift from clay into chalky material. The geologic map names Pecan Gap Chalk of Campanian age. Seasonal water tables are not mapped within 60 inches, while flood prone soils cover 1 percent. High steel corrosion risk is mapped across 96 percent, so the line owner should address casing and tracer wire materials.

How do we bore Windcrest clay without losing the line?

Windcrest’s clay calls for controlled fluid and staged reaming. We track the drill head from the surface and record its depth and pitch so the route stays aligned near streets such as Crestway Drive.

  1. Branyon clay is sticky, so we use a thinner drilling fluid and polymer, then ream in stages before pulling pipe through the open hole.
  2. With heavy clay mapped at depth in Windcrest, we watch fluid returns near streets so pressure does not lift pavement around Crestway Drive.
  3. The USDA soil survey maps weathered bedrock within 60 inches in part of Windcrest; where chalk meets clay, we check steering as the bit slows.
  4. Before drilling near a marked line along Eagle Crest Boulevard, we hydrovac pothole to expose it; surface marks do not show its depth.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What does a bore have to cross in Windcrest near Crestway Drive?

FM 1976 is the state highway mapped for 1.5 roadway miles inside Windcrest. Interstate 410 and Interstate 35 touch or run along the city limits, and Loop 368 is 0.2 miles away. Among the longest named city streets, Crestway Drive runs 1.75 miles, Walzem Road runs 1.54 miles, and Eagle Crest Boulevard runs 1.35 miles. A bore near these routes needs a path that avoids cutting pavement where possible, with the work area and entry pits planned around street access.

CrossingTypeMapped extentWho has a say
FM 1976State highway1.5 roadway miles insideState highway office
Interstate 410Highway nearbyRuns along or touches the city limitsState highway office
Interstate 35Highway nearbyRuns along or touches the city limitsState highway office
Loop 368Highway nearby0.2 miles outsideState highway office
Union PacificRailroad nearby0.1 miles outsideThe railroad
Walzem CreekStream1.57 channel miles insideChecked for Corps of Engineers jurisdiction
Rosillo CreekStream0.48 channel miles insideChecked for Corps of Engineers jurisdiction
Perrin Beitel CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Martinez CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Windcrest, and no street and rail crossings are mapped there. Union Pacific track is 0.1 miles outside the city limits, so a route reaching it needs railroad coordination. Walzem Creek runs 1.57 channel miles inside the city, and Rosillo Creek runs 0.48 miles; 12 mapped street crossings pass over named streams. No lakes or ponds are mapped within one mile. For a line under Crestway Drive, we pothole marked utilities before bringing the drill near them.

Whose permission does Windcrest work in Bexar County need?

Windcrest is an incorporated city, so streets such as Crestway Drive and Walzem Road belong to the city itself. FM 1976 is a state highway: electric and communication lines crossing it need 60 inches of cover below the lowest crossed grade, while water lines need 60 inches and pressurized sewer lines need 60 inches at crossings. The line owner, not the drilling contractor, files the TxDOT utility permit through RULIS, and the TxDOT San Antonio District reviews it. Trinity supplies the bore plan and profile for work under the utility owner’s permit. A Union Pacific crossing needs an agreement with the railroad, and a Walzem Creek route is checked for federal jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Windcrest, Bexar County?

The provider for a specific Windcrest water address must be confirmed with the city, Bexar County or the local water district before planning a bore; available records do not match a provider to the place. Utilities reporting electric service in Bexar County include the City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative. We confirm the owner of the line near FM 1976 before laying out an electric conduit route.

Line ownerWhat it isSourceSize
City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Bexar CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put Windcrest’s median housing year at 1973. The survey estimates 85 percent of homes were built from 1960 to 1999, 4 percent before 1960 and 11 percent in 2000 or later. That mix can mean work for replacement lines as well as new services near Eagle Crest Boulevard. We expose marked utilities with hydrovac potholing before drilling near them; a mark shows position, not depth.

Trinity Boring Solutions crew running a 2 inch conduit directional bore with airport hangars and a parked jet in the background in Oklahoma City
Our crew running a 2 inch conduit bore near the hangars at an Oklahoma City airport.

How far is Windcrest from Live Oak and our Yukon office?

Windcrest is an incorporated city of 2.15 square miles in Bexar County, at an elevation of 787 feet. Its ZIP codes are 78239 and 78218. Live Oak is 3.7 miles northeast and the nearest larger city; Kirby is also 3.7 miles away, to the south. Converse lies 4.6 miles east, while San Antonio, the county seat, is 9.3 miles southwest. Our Yukon, Oklahoma main office is 469 road miles away, a drive of 9.0 hours. That distance is part of planning crew mobilization for work near FM 1976.

Places near Windcrest

What kinds of bores come up in Windcrest near Walzem Creek?

  • Highway crossing: A route under FM 1976 needs a bore plan that accounts for the state highway and the required cover for the line type.
  • Street service: A service near Crestway Drive can pass beneath pavement, with entry and exit pits set in dirt where access allows.
  • Creek crossing: A Walzem Creek route needs a depth plan beneath the channel and a jurisdiction check during planning.
  • Rail crossing: Union Pacific track lies just outside Windcrest, so a route reaching it needs railroad coordination before casing and depth are set.
  • Fiber conduit: A fiber route near Eagle Crest Boulevard needs marked utilities exposed before the drill approaches the planned path.
  • Water line: A service near FM 1976 needs the address specific water provider confirmed before the bore route is laid out.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of Windcrest work near FM 1976?

For a Windcrest quote, give us the address or map pin, what will go in the ground, the pipe or conduit size and the footage; a sketch or plans help us understand the route near FM 1976. We review the crossing points and access before setting the scope, including any street or drainage work shown on the plans.

The job scope sets the price. Ground conditions matter: Branyon clay can cling to tooling, and mapped chalk may slow a route. Crossings matter too, including utilities near Crestway Drive, pavement on FM 1976 and a possible route toward Union Pacific track. Logistics also affect the work: pits, excavator time, sand backfill and mobilization from Yukon all depend on the route. Creek or drainage crossings, line size, footage and emergency timing can change the equipment and crew plan.

Questions people ask about boring in Windcrest

Does Trinity Boring Solutions take directional boring work in Windcrest, Bexar County, and who staffs it?

Yes. We take directional boring work in Windcrest, and our own crews or crews from satellite yards run by vetted partner drilling contractors can staff a job. Our Yukon office remains your contact from the first call through the bore log. The route, whether near Crestway Drive or Walzem Creek, determines the field plan.

Who approves a bore under FM 1976 in Windcrest?

TxDOT handles work in the FM 1976 right of way through the TxDOT San Antonio District. The utility that owns the line submits the application in RULIS, and we provide the bore plan and profile for that filing. The permit sets the route and may specify different cover depths for a crossing near Windcrest streets.

What does a Windcrest bore near Union Pacific track require?

Union Pacific owns the track mapped 0.1 miles outside Windcrest. A bore crossing that railroad needs an agreement with the railroad, which sets requirements such as casing, depth and flagging. We plan the route and work to the agreement rather than treating the nearby track as an ordinary street crossing.

Can a line be bored under Walzem Creek in Windcrest?

A bore can be planned beneath Walzem Creek, which runs 1.57 channel miles inside Windcrest. The route needs enough depth to stay under the channel, and the crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning. Creek banks can remain uncut while pits sit on each side.

Who owns electric lines in Windcrest, Bexar County, and who confirms conduit specs?

Several utilities report electric service in Bexar County, including the City of San Antonio and four electric cooperatives. We identify the owner for the specific line near FM 1976 before planning a conduit bore, then confirm conduit specifications with that owner. The countywide list does not establish which utility serves every Windcrest address.

Who is in charge of Eagle Crest Boulevard in Windcrest, and does it need to be cut?

Windcrest is incorporated, so Eagle Crest Boulevard is a city street. Directional boring can pass beneath pavement without an open cut, with pits placed in dirt on either side where the site allows. The route still has to account for utilities beneath the street and the available access for the drilling setup.

How early should I call Texas811 for a Windcrest bore near Crestway Drive?

Request Texas811 marks at least 48 hours before excavation, not counting Saturdays, Sundays or legal holidays, and no earlier than 14 days before the work. Texas811 describes the notice as at least two working days. If the start moves more than 14 days past the original notice for a Crestway Drive bore, submit a new request; refresh worn or moved marks before work continues.

How far is Windcrest from Yukon by way of Live Oak, and does that affect the job?

Windcrest is 469 road miles from our Yukon, Oklahoma main office, with a listed drive of 9.0 hours; Live Oak is 3.7 miles northeast of Windcrest. The distance from Yukon can affect mobilization planning. We review that alongside the route, such as work near FM 1976, and the equipment the bore requires.

What affects the cost of directional boring in Windcrest near FM 1976?

The job details set the cost, including footage, pipe or conduit size, soil, exposed utilities, pavement, pits and equipment time. Branyon clay can affect drilling and reaming, while work beneath FM 1976 brings highway requirements into the plan. A Walzem Creek crossing or long mobilization from Yukon can also change the scope.

Where the Windcrest facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Windcrest

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Windcrest, Texas

Type the address of your job in Windcrest. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Windcrest

Same county: San Antonio · Timberwood Park · Leon Valley · Helotes · Lackland AFB · Selma · Alamo Heights · Fair Oaks Ranch · Schertz · Sandy Oaks · Scenic Oaks · Castle Hills. All counties: Texas county list.