trinityboringsolutions.com

Andrews Texas Directional Boring: Faskin Soil, US 385 and Loop 1910

Quick Answer: The City of Andrews groundwater system and electric providers reporting in Andrews County are part of the existing line picture, so confirm the electric owner before a conduit bore. We take directional boring, also called horizontal directional drilling (HDD), beneath US 385 and Andrews streets without opening the paved route. Our Yukon main office is 460 road miles away, so a Loop 1910 job needs mobilization planned into its scope. Faskin soil and fine sandy loam can let a hole slough, making staged reaming and a ready pipe important.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Andrews bores at a glance

  • County seat of Andrews County, Texas. Population 13,677 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 460 miles, about 9 hours of driving.
  • Ground: Faskin soil is mapped on 65 percent of the area, with fine sandy loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: US 385, Texas State Highway 176, Texas State Highway 115 and FM 87. State permit office: TxDOT Odessa District.
  • Railroad track inside the boundary: none mapped.
  • Public water: City of Andrews, groundwater wells.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring along Loop 1910 in Andrews?

The City of Andrews groundwater system and electric providers reporting service in Andrews County are part of the buried utility picture; we confirm the line owner before planning an electric conduit bore. The Census Bureau Vintage 2024 estimate puts Andrews at 13,677 people. We install water, sewer, gas, electric conduit and fiber, including routes along Loop 1910 or Mustang Drive where the planned path and existing lines allow.

Our main office is in Yukon, Oklahoma, and Andrews work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We have drilled directionally since 1982, after our family business began in 1965. Four decades of boring experience matters in Andrews because Faskin soil can cave behind the drill head, so the crew must manage the hole as the bore advances.

Aerial view of a Trinity Boring Solutions directional drill set up for a gas line bore at a commercial site
Our directional drill set up for a gas line bore at a commercial site, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What is Faskin soil like to bore in Andrews?

The USDA soil survey maps Faskin across 65 percent of Andrews and Triomas across 32 percent. At about 40 inches below the surface, 65 percent of the mapped area is fine sandy loam and 32 percent is sandy clay loam; the average clay content there is 18 percent. The soil survey maps patterns, not conditions at a specific bore. The sandy share can loosen behind the bit, so we plan staged reaming and have the pipe ready before the final pass rather than leave an open hole waiting.

USDA soil survey, inside the Andrews city limitsWhat is mapped
Soil series mappedFaskin 65 percent and Triomas 32 percent
Texture at the surfacefine sandy loam 66 percent and fine sand 32 percent
Texture about 40 inches downfine sandy loam 65 percent and sandy clay loam 32 percent
Engineering class about 40 inches downclayey sand (SC) 98 percent
Average clay content about 40 inches down18 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel0 percent of the area

Bedrock is not mapped in the top five feet of Andrews, and seasonal water tables and flood prone soils are not mapped there. The USDA geology map shows the Pleistocene Blackwater Draw Formation, with sand, silt and local clay, as much as 25 ft thick; it also maps Paleocene Cenozoic sedimentary rocks. That does not rule out deeper rock. Steel corrosion risk is not mapped as high, but the line owner decides on coatings. The sandy surface can still cave, so drilling fluid and staged reaming help support the bore.

How do crews bore Andrews fine sandy loam?

Andrews soil mapping shows a sandy surface and fine sandy loam at depth. We match the fluid and reaming sequence to the ground on the Loop 1910 bore path, then keep the pipe ready for pullback.

  1. At a Loop 1910 site with sandy mapped soils, we use drilling fluid to support the hole and ream in stages so loose ground is less likely to cave behind the bit.
  2. Before drilling near marked lines along Mustang Drive, we expose each utility with hydrovac potholing because surface paint does not show its depth.
  3. We track the drill head from the surface and log depth and pitch as the Andrews bore advances, adjusting the path to the site conditions.
  4. With the pipe laid out before the last ream near Main Street, we can pull it through while the supported hole is ready rather than leave it open.
Trinity Boring Solutions water trailer supplying water for bentonite drilling fluid on a sleeve bore in northeast OKC
Our water trailer feeding the bentonite drilling fluid mix on a sleeve bore in northeast Oklahoma City.

What might a bore cross in Andrews near US 385?

US 385, Texas State Highway 176, Texas State Highway 115 and FM 87 run inside Andrews. A crossing beneath US 385 or another state road needs a bore plan that accounts for the highway right of way. Loop 1910 is the longest named street in the city at 12.86 miles, followed by Mustang Drive at 7.65 miles and Avenue East at 3.71 miles. Main Street adds another route to consider when mapping a service or conduit path. A map pin helps identify the exact road section and likely conflicts.

CrossingTypeMapped extentWho has a say
US 385US highway4.4 roadway miles insideState highway office
Texas State Highway 176State highway4.9 roadway miles insideState highway office
Texas State Highway 115State highway4.7 roadway miles insideState highway office
FM 87State highway3.6 roadway miles insideState highway office
Swipe the table sideways to see every column.

No railroad tracks are mapped inside Andrews or within one mile outside its limits, so there is no mapped rail route to plan around here. No named streams or lakes and ponds are mapped in or within one mile of the city; the mapped street crossings of named streams are also absent. The mapped unnamed drainage totals 0.05 miles inside the limits. A proposed crossing near that drainage still needs a site specific look, while streets such as Mustang Drive may bring pavement and buried utilities into the bore plan.

Do I need a permit for a bore in Andrews County?

For a bore in the right of way of US 385, Texas State Highway 176, Texas State Highway 115 or FM 87, the line owner needs a TxDOT utility permit. The TxDOT Odessa District reviews it, and the utility owner, not our crew, submits the application through RULIS. We supply the bore plan and profile and work under the permit issued to that owner. TxDOT rules call for boring or tunneling beneath existing highway pavement, with casing at crossings and the bore extending beneath all travel lanes on rural highways. Andrews is incorporated, so city streets such as Loop 1910 belong to the city itself. No railroad or named stream crossing is mapped in the area.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried in Andrews near City of Andrews?

The City of Andrews public water system uses groundwater wells and reports 5,333 service connections serving 14,109 people. That existing system matters when laying out a new water service or a bore near a water line. Electric providers reporting service in Andrews County are Oncor Electric Delivery Company, Southwestern Public Service and Lyntegar Electric Cooperative. The line owner must be confirmed for the specific address before we plan an electric conduit bore, since those providers should not be assumed to serve every property.

Line ownerWhat it isSourceSize
City of AndrewsPublic water systemGroundwater wells5,333 connections, 14,109 people served
Oncor Electric Delivery Company, Southwestern Public Service and Lyntegar Electric CooperativeElectric utilities reporting service in Andrews CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put the median Andrews housing year at 1975; 26 percent of homes were built before 1960, and 22 percent were built in 2000 or later. A replacement bore along Mustang Drive may follow older buried infrastructure, while newer services can need a different route. We expose every marked utility by hydrovac before drilling near it. For example, a proposed crossing under Mustang Drive needs the marked lines exposed first because paint shows position, not depth.

Trinity Boring Solutions technician hydrovac daylighting along a commercial curbline during utility locating in Oklahoma City
Hydrovac daylighting along a commercial curb line in Oklahoma City to find the utilities before a bore.

Where is Andrews in relation to Odessa?

Andrews is the county seat of Andrews County in West Texas, at an elevation of 3,177 ft and within 6.95 square miles. Its ZIP code is 79714. McKinney Acres is 2.2 miles southeast, Goldsmith is 23.7 miles south, Gardendale is 24.1 miles southeast and Seminole is 28.3 miles north. Odessa, the nearest larger city, is 32.8 miles south. Our Yukon, Oklahoma main office is 460 road miles away, a 9.0 hour drive, so distance is part of planning mobilization for work along roads such as US 385.

Places near Andrews

What bore jobs come up around Loop 1910 in Andrews?

  • Highway crossing: A bore beneath US 385 needs a route and work plan that account for the TxDOT right of way and existing utilities.
  • Street service: A water or sewer line along Main Street can pass beneath pavement while pits stay in the dirt at each end.
  • Fiber route: A conduit bore near Loop 1910 can carry fiber while avoiding an open cut through the street surface.
  • Water connection: A new line near the City of Andrews system needs a route checked against the existing groundwater distribution lines.
  • Utility exposure: For a proposed line beneath Mustang Drive, hydrovac potholing exposes marked lines before the drill approaches them.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for a bore on Main Street in Andrews?

Send a map pin first, since an exact point on Main Street can place the bore near a different set of utilities or pavement than another block. Include what is going in the ground, the pipe or conduit size and the footage. A sketch or plans help us see how the route meets the street and any nearby US 385 right of way.

The soil is the first cost driver: Andrews has a large mapped sandy share, which can need staged reaming to keep the hole open. Next come utility crossings and exposures, then pavement or concrete such as a route along Main Street, and any pits, excavator time or sand backfill. Bore length and pipe size also shape the work. A route near US 385 adds highway coordination, while the 460 road miles from Yukon affect mobilization. Emergency or high profile work can change the scope.

Questions people ask about boring in Andrews

Does Trinity take directional boring work in Andrews County, and who staffs it?

Yes. We take directional boring work in Andrews County and staff it with our own crews or crews from partner drilling contractors we have vetted. Our Yukon main office handles the job from the first call through the bore log, so the contact stays the same even if a partner crew is on site.

What does Andrews housing age along Mustang Drive mean for replacement bores?

The median housing year in Andrews is 1975, according to American Community Survey 2019 to 2023 five year estimates. That mix can mean a replacement route near Mustang Drive has older buried lines to account for, while a new service may need a different path. We expose marked utilities before drilling near them.

What ground should I expect in Andrews Faskin soil?

The USDA soil survey maps Faskin across 65 percent of Andrews. At about 40 inches down, fine sandy loam covers 65 percent of the mapped area and sandy clay loam 32 percent. Those are survey patterns, not test borings; sandy ground can cave behind the bit, so we plan fluid support and staged reaming.

Will a bore in Andrews hit rock below the mapped soil?

Bedrock is not mapped in the top five feet of Andrews, but that does not rule out rock deeper down. The geology map shows the Pleistocene Blackwater Draw Formation and Paleocene Cenozoic sedimentary rocks. We use the route and field conditions to select the tooling rather than treating the map as a test of the bore path.

Who approves a bore under US 385 in Andrews?

TxDOT handles utility permits for work in the US 385 right of way, with review by the TxDOT Odessa District. The utility owner submits through RULIS, not the drilling contractor. We provide the bore plan and profile and work to the permit issued to the line owner.

Who runs the Andrews public water system, and where does its water come from?

The City of Andrews owns and runs the public water system, which uses groundwater wells. It reports 5,333 service connections serving 14,109 people. That makes identifying existing water lines important when a new service or another bore is planned near the system.

How much notice does Andrews need for a Loop 1910 bore, and what if marks fade?

Texas811 needs the locate request at least 48 hours before excavation, not counting Saturdays, Sundays and legal holidays, and no earlier than 14 days before. If a Loop 1910 start slips more than 14 days past the original notice, submit a new request. Worn or moved marks must be refreshed through Texas811 before work continues.

How far is Andrews from Yukon, and does Odessa change the job plan?

Andrews is 460 road miles and a 9.0 hour drive from our Yukon, Oklahoma main office. Odessa is 32.8 miles south of Andrews, but the job location and scope determine crew mobilization. We account for the travel distance when planning a bore along a route such as US 385.

What affects the cost of directional boring near US 385 in Andrews?

The mapped sandy soil can make hole support and staged reaming a leading factor. Bore length, pipe or conduit size, marked utility exposures, pavement and pits also affect the job. A US 385 right of way adds permit coordination, and the 460 road miles from Yukon affect mobilization. The exact route and scope set the work.

Where the Andrews facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Andrews

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Andrews, Texas

Type the address of your job in Andrews. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Andrews

All counties: Texas county list.