trinityboringsolutions.com

White Oak Texas Directional Boring: Bowie Fine Sandy Loam, US 80 and Hawkins Branch

Quick Answer: Bowie fine sandy loam is common in White Oak, with sandy clay loam mapped below the surface. We do directional boring, also called horizontal directional drilling (HDD), for crossings such as Hawkins Branch. White Oak is 338 road miles from our Yukon, Oklahoma main office, so a White Oak Road bore needs careful mobilization planning. Sandy clay loam can hold the hole, but clay may grip the pipe during pullback.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

White Oak bores at a glance

  • Incorporated city in Gregg County, Texas. Population 6,241 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 338 miles, about 6.6 hours of driving.
  • Ground: Bowie soil is mapped on 43 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 3 percent of the area.
  • Highways inside the boundary: US 80, FM 2275, Texas State Highway 42 and FM 3272. State permit office: TxDOT Tyler District.
  • Railroad track inside the boundary: Union Pacific, with 2 mapped street and rail crossings.
  • Named streams inside the boundary: Hawkins Branch and Campbells Creek.
  • Public water: City of White Oak, surface water.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring in White Oak, Gregg County?

We take directional boring work in White Oak and across Texas, planning each route around site conditions. The Census Bureau Vintage 2024 estimate puts the city at 6,241 people. On streets such as Center Street, our crews can install water, sewer, gas, electric conduit or fiber beneath pavement and driveways, leaving the surface uncut where the bore path allows.

Our main office is in Yukon, Oklahoma, and White Oak work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore was roughly 4,100 feet of 48 inch pipe beneath the Arkansas River in Tulsa. A typical White Oak job, such as a shorter crossing near Hawkins Branch, is modest beside that reach. Our family business started in 1965, and we have done directional boring since 1982, experience we apply when planning White Oak routes.

Ditch Witch directional drill rig with a loaded drill rod rack staged at a commercial jobsite
Our Ditch Witch directional drill with a full rack of drill rod staged at a commercial site. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about White Oak and Bowie soil?

The USDA soil survey maps Bowie soil across 43 percent of White Oak, with Bowie fine sandy loam among the mapped units. At about 40 inches below the surface, sandy clay loam is mapped under 79 percent of the area. Average clay content at that depth is 28 percent, while sandy textures account for 8 percent. These are mapped soil patterns, not test borings at a proposed route. For a bore near White Oak Road, that mix suggests a hole that can stay open, while clay can cling to the reamer or pipe.

USDA soil survey, inside the White Oak city limitsWhat is mapped
Soil series mappedBowie 43 percent, Cuthbert 26 percent, Kirvin 11 percent, Iulus 8 percent and Lilbert 7 percent
Texture at the surfacefine sandy loam 79 percent, loamy fine sand 9 percent and gravelly fine sandy loam 7 percent
Texture about 40 inches downsandy clay loam 79 percent, fine sandy loam 8 percent and clay loam 7 percent
Engineering class about 40 inches downlean clay (CL) 52 percent, clayey sand (SC) 34 percent and silty clayey sand (SC SM) 8 percent
Average clay content about 40 inches down28 percent
Bedrock mapped within 60 inches3 percent of the area (0 percent hard rock, 3 percent weathered rock)
Seasonal water table within 60 inches52 percent of the area
Flood prone soils8 percent of the area
High corrosion risk for uncoated steel48 percent of the area

The USDA soil survey does not map bedrock in White Oak’s top five feet. The geologic map shows Quartz sand decomposition residuum of Cenozoic age and Queen City Sand of Eocene age, so deeper ground can vary. Seasonal water tables are mapped within 60 inches across 52 percent of the area, while flood prone soils cover 8 percent, making pits near Hawkins Branch worth planning carefully. High steel corrosion risk is mapped across 48 percent; the line owner should weigh casing and tracer wire materials, while HDPE is not affected by soil corrosion.

How do crews handle White Oak’s sandy clay loam?

Bowie fine sandy loam and sandy clay loam call for a bore plan that manages both a stable hole and sticky cuttings. Along Hawkins Branch, we also plan for wet ground and channel depth.

  1. At Bowie soil locations, we adjust the drilling fluid and ream in stages so clay does not pack onto the cutting tools or grip the pipe.
  2. Where the sandy clay loam mapped at about 40 inches is present, we have the pipe ready before the final ream and pull it without leaving the hole open.
  3. Near Hawkins Branch, we plan pit placement and bore depth around the channel, and account for seasonal water tables mapped in White Oak.
  4. On a Center Street route, we hydrovac expose marked utilities first, then track the drill head from the surface and log depth and pitch.
Open bore pit in red Oklahoma dirt with white PVC conduit stub ups and an orange safety barrier
An open bore pit in red Oklahoma dirt with PVC conduit stubbed up and a safety barrier around it.

Which roads, tracks or creeks can a White Oak bore cross near Hawkins Branch?

US 80 runs 5.9 mapped roadway miles inside White Oak. FM 2275, Texas State Highway 42 and FM 3272 also pass through the city, so a route may involve a state highway right of way rather than only a city street. Whatley Road is the longest named street at 5.62 miles, followed by White Oak Road at 3.54 miles and George Richey Road at 2.13 miles. Center Street adds another 1.76 miles. These named routes help define where a bore may need to pass beneath pavement.

CrossingTypeMapped extentWho has a say
US 80US highway5.9 roadway miles insideState highway office
FM 2275State highway2 roadway miles insideState highway office
Texas State Highway 42State highway1.9 roadway miles insideState highway office
FM 3272State highway1.4 roadway miles insideState highway office
Union PacificRailroad2.77 track miles insideThe railroad
Hawkins BranchStream5.8 channel miles insideChecked for Corps of Engineers jurisdiction
Campbells CreekStream1.72 channel miles insideChecked for Corps of Engineers jurisdiction
Lafamo CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Glen Dale CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Lake DeverniaLake or pond101 acres, nearbyChecked for Corps of Engineers jurisdiction
Lake HarrisLake or pond28 acres, insideChecked for Corps of Engineers jurisdiction
Cook LakeLake or pond9 acres, nearbyChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Union Pacific has 2.77 track miles inside White Oak on the Mineola Subdivision, and public mapping shows two street and rail crossings in the city. Hawkins Branch runs 5.8 channel miles here; Campbells Creek adds 1.72 miles, with 12 mapped street crossings of named streams. Lake Harris is inside the limits. A creek or lake crossing changes the bore route and prompts a check for federal waterway jurisdiction during planning.

Who approves a White Oak bore near US 80 or Union Pacific?

For a bore in the US 80, FM 2275, Texas State Highway 42 or FM 3272 right of way, the utility owner applies for a TxDOT utility permit through RULIS. The TxDOT Tyler District reviews it; we prepare the bore plan and profile for the owner’s application and work under its permit. TxDOT cover rules set the bore depth: electric and communication lines need 60 inches at highway crossings, while water lines also need 60 inches. White Oak streets belong to the city. A crossing of Union Pacific’s track needs an agreement with the railroad, and a Hawkins Branch crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of White Oak water system?

The City of White Oak public water system uses surface water and has 2,643 service connections serving 6,469 people. A proposed water bore near Center Street still needs a route check against existing lines. Electric utilities reporting service in Gregg County are Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric Cooperative. We confirm the line owner for the specific address before planning an electric conduit bore; the county list does not identify the provider at every White Oak address.

Line ownerWhat it isSourceSize
City of White OakPublic water systemSurface water2,643 connections, 6,469 people served
Southwestern Electric Power, Rusk County Electric Cooperative and Upshur Rural Electric CooperativeElectric utilities reporting service in Gregg CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

American Community Survey 2019 to 2023 five year estimates put White Oak’s median housing year at 1981. The estimates show 10 percent of homes built before 1960, 74 percent from 1960 to 1999, and 16 percent in 2000 or later. A bore along Center Street might serve a newer connection or replace an older line, but the age figures do not locate buried pipe. We hydrovac expose marked utilities on the route before drilling near them, since locate paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Where is White Oak in relation to Warren City and Longview?

White Oak is an incorporated city in Gregg County, with an area of 9.09 square miles and an elevation of 322 feet. We use White Oak ZIP codes 75693 and 75604 to confirm the location when planning underground boring work. Clarksville City is 2.3 miles west, Warren City is 3.3 miles northwest, East Mountain is 3.9 miles north and Union Grove is 4.7 miles northwest. Longview, the county seat and nearest larger city, is 5.4 miles east. From our Yukon yard, White Oak is 338 road miles and a 6.6 hour drive, which affects mobilization for a Whatley Road project.

Places near White Oak

What would we bore beneath White Oak Road?

  • Highway crossing: A bore beneath US 80 can carry water or conduit under the roadway without cutting through its pavement.
  • Water service: A connection near Center Street can tie into a route planned around the City of White Oak water system.
  • Fiber drop: A fiber bore along Whatley Road can pass beneath driveways and pavement while keeping the surface intact.
  • Creek crossing: A route beneath Hawkins Branch needs depth planning around the channel and a jurisdiction check during planning.
  • Rail crossing: A proposed bore under Union Pacific’s Mineola Subdivision needs the railroad’s crossing agreement and its conditions.
  • Street connection: White Oak Road can provide a route for sewer, gas or electric conduit beneath a driveway or street.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring near Center Street in White Oak?

For a Center Street quote, start with the address or a map pin so we can place the route. Tell us what will go underground, such as water or fiber, then give the pipe or conduit size and footage. If the route reaches US 80, a sketch or plans help show the highway crossing and the limits of the work.

Soil and pipe size matter early in White Oak because Bowie fine sandy loam overlies sandy clay loam that can hold cuttings against the reamer. Next come the number of utilities to expose, plus pavement, concrete, pits, excavator time and sand backfill. A Hawkins Branch crossing adds creek planning. US 80 or Union Pacific can bring crossing requirements into the scope. Mobilization also reflects the 338 road miles from Yukon, and emergency or high profile work can change the plan.

Questions people ask about boring in White Oak

Does Trinity Boring Solutions take directional boring jobs in Gregg County near White Oak?

Yes. We take directional boring work in White Oak and elsewhere in Texas. Our crews work on water, sewer, gas, electric conduit and fiber routes, including crossings near White Oak Road. You deal with Trinity from the first call through the bore log, regardless of which vetted partner contractor’s satellite yard supports the job.

Can groundwater or flooding affect a White Oak bore pit near Hawkins Branch?

It can affect pit planning. The USDA soil survey maps seasonal water tables within 60 inches across 52 percent of White Oak, and Hawkins Branch runs 5.8 channel miles through the city. We plan pit locations for wet conditions and check a creek crossing for U.S. Army Corps of Engineers jurisdiction during planning.

Does Bowie soil in White Oak create a corrosion concern, and what pipe can we use?

The USDA soil survey maps high steel corrosion risk across 48 percent of White Oak. HDPE is not affected by soil corrosion, while the line owner should consider casing and tracer wire materials where steel is proposed. Bowie soil is mapped across 43 percent of the city, but the route and material choice need to be considered together.

What ground might a bore pass through in White Oak near Bowie soil?

The USDA soil survey maps Bowie soil across 43 percent of White Oak, and sandy clay loam at about 40 inches under 79 percent of the area. Clay content averages 28 percent at that depth. These are mapped patterns rather than test borings, so a route near White Oak Road may meet different conditions than the citywide map suggests.

Could we encounter deeper rock while directional boring in White Oak, even though bedrock is not mapped in the top five feet?

For White Oak bores, bedrock is not mapped in the top five feet, but deeper rock remains possible. The geologic map shows Cenozoic Quartz sand decomposition residuum and Eocene Queen City Sand. A proposed bore near FM 2275 still needs its route and depth reviewed against the ground it will actually cross.

Who approves a White Oak bore beneath US 80, and which TxDOT office reviews it?

The utility owner applies for a TxDOT permit through RULIS when work is in the US 80 right of way. The TxDOT Tyler District reviews the application, and we prepare the bore plan and profile for the owner. Cover depth depends on line type, and a permit can set a different depth.

What bore sizes and lengths can Trinity handle for a job near White Oak’s Center Street?

For White Oak routes, we handle lines from 3/4 inch service lines up to 48 inch casing, with bore lengths from 10 feet to 5,000 feet. A Center Street job may be much shorter than those limits, depending on the route, pipe size and utilities to cross. Plans or a sketch help us assess the specific bore.

How much notice does Texas811 need for a White Oak bore along Whatley Road, and what if marks move?

For a Whatley Road excavation, Texas law requires a locate request at least 48 hours ahead, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. For a White Oak project, if the start slips more than 14 days past the original notice, we make a new request. Before work continues in White Oak, we have worn or moved marks refreshed through Texas811.

What affects our directional boring cost near US 80 in White Oak, including route choices and underground conditions?

The route and ground set the scope, starting with White Oak’s sandy clay loam and clay that can affect reaming. Pipe size and length, utilities to expose, pavement, pits and backfill also matter. A US 80 crossing or Hawkins Branch route can add planning, while mobilization reflects the 338 road miles from Yukon.

Where the White Oak facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in White Oak

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in White Oak, Texas

Type the address of your job in White Oak. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for White Oak

Same county: Kilgore · Gladewater · Lake Cherokee · Liberty City · Lakeport · Easton. All counties: Texas county list.