Iola Texas Directional Boring: Zulch Soil, FM 39 and Ragan Creek
Quick Answer: Along FM 39, Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for lines that need to pass beneath roads or Ragan Creek. Iola has 12.23 public road miles, and its 382 road miles from our Yukon, Oklahoma main office shape mobilization for work near Main Street. Zulch soil covers 64 percent of the city, while clay at about 40 inches can grip a pipe and load the reamer. Staged reaming and fluid control help manage that ground near FM 244.
Iola bores at a glance
- Incorporated city in Grimes County, Texas. Population 347 (Census Bureau 2024 estimate).
- Road distance from our Yukon, Oklahoma main office: 382 miles, about 7.5 hours of driving.
- Ground: Zulch soil is mapped on 64 percent of the area, with clay about 40 inches down.
- Rock: no bedrock is mapped in the top 60 inches.
- Highways inside the boundary: FM 39 and FM 244. State permit office: TxDOT Bryan District.
- Railroad track inside the boundary: BNSF Railway.
- Named streams inside the boundary: Ragan Creek and Neeley Creek.
- Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
- Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
- Phone answered 24 hours a day: (405) 409-7423
Who does directional boring near Ragan Creek in Iola?
Iola is an incorporated city in Grimes County with a population of 347, according to the Census Bureau Vintage 2024 estimate. We install water, sewer, gas, electric conduit and fiber lines, including routes that need to pass beneath Main Street, FM 39 or Ragan Creek. The route and the line type determine the bore plan.
Our main office is in Yukon, Oklahoma, and Iola work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore, roughly 4,100 feet of 48 inch pipe under the Arkansas River in Tulsa, shows the range of our work; a typical Iola job would be a shorter utility bore planned around Zulch soil and local crossings. Our family business began in 1965, and we have done directional boring since 1982 for work serving Iola.

What does the soil survey show about Iola and Zulch soil?
The USDA soil survey maps Zulch soil across 64 percent of Iola, with Zack at 29 percent and smaller Gredge and Boonville shares. Fine sandy loam covers 99 percent of the mapped surface. About 40 inches down, the survey maps clay in 67 percent of the area, loam in 29 percent and clay loam in 3 percent; average clay content at that depth is 37 percent. In Iola, these mapped patterns help guide underground work; they are not test borings. Sticky clay can build on a reamer and grip pipe, so the soil profile matters to the drilling plan.
| USDA soil survey, inside the Iola city limits | What is mapped |
|---|---|
| Soil series mapped | Zulch 64 percent, Zack 29 percent, Gredge 3 percent and Boonville 3 percent |
| Texture at the surface | fine sandy loam 99 percent |
| Texture about 40 inches down | clay 67 percent, loam 29 percent and clay loam 3 percent |
| Engineering class about 40 inches down | fat clay (CH) 70 percent and lean clay (CL) 29 percent |
| Average clay content about 40 inches down | 37 percent |
| Bedrock mapped within 60 inches | None mapped |
| Seasonal water table within 60 inches | 3 percent of the area |
| Flood prone soils | 1 percent of the area |
| High corrosion risk for uncoated steel | 96 percent of the area |
The survey does not map bedrock in Iola’s top five feet, though that does not rule out deeper rock. It maps a seasonal water table within 60 inches in 3 percent of the area and flood prone soils in 1 percent. High steel corrosion risk covers 96 percent, a concern for steel casing and tracer wire that the line owner should address through material or coating choices. The geologic map shows Massive Clay Decomposition Residuum of Cenozoic age and the Yegua Formation of Bartonian age, both with clay; that supports planning for clay that can swell or hold the bore open.
How do we drill through Iola clay?
Zulch soil and clay mapped about 40 inches down call for a controlled bore rather than a fast pull. We plan fluid, reaming stages and pipe timing around Iola’s sticky ground.
- For Zulch soil, we use a thinner drilling fluid with polymer and open the hole in stages to reduce sticky clay buildup on the reamer.
- With clay mapped about 40 inches down, we watch fluid returns near pavement and manage pressure to limit the chance of lifting a road surface.
- Where Ragan Creek shapes the route, we plan bore depth beneath the channel and check whether the crossing falls under U.S. Army Corps of Engineers jurisdiction.
- If a proposed Iola pit meets the mapped seasonal water table area, we keep pits small and pump out water as needed.

What is in the way of a new line in Iola near Main Street?
FM 39 and FM 244 are state highways within Iola, with 2.1 and 1.1 mapped roadway miles inside the city limits. Main Street is the longest named street at 0.67 miles, followed by Brazos Avenue at 0.59 miles and Neches Avenue at 0.36 miles. Those routes give a project several possible street or highway interfaces, so the bore path and launch pits need to be set against the actual address and right of way.
| Crossing | Type | Mapped extent | Who has a say |
|---|---|---|---|
| FM 39 | State highway | 2.1 roadway miles inside | State highway office |
| FM 244 | State highway | 1.1 roadway miles inside | State highway office |
| BNSF Railway | Railroad | 0.44 track miles inside | The railroad |
| Ragan Creek | Stream | 0.48 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Neeley Creek | Stream | 0.21 channel miles inside | Checked for Corps of Engineers jurisdiction |
| Bull Creek | Stream nearby | 0.1 miles outside | Checked for Corps of Engineers jurisdiction |
BNSF Railway owns 0.44 track miles in Iola, and the mapped railroad subdivision is BNSF Railway Houston. No street and rail crossings are mapped inside the city. Ragan Creek runs 0.48 channel miles here, and Neeley Creek runs 0.21; one mapped street crossing intersects a named stream. A route near either creek needs channel depth planning, and a water crossing is checked for federal jurisdiction during planning.
Whose permission does an Iola bore under FM 39 need?
For work in FM 39 or FM 244 right of way, the utility owner applies for the TxDOT utility permit through RULIS, and the TxDOT Bryan District reviews it; we prepare the bore plan and profile and work under the owner’s permit. Cover depth depends on the line: electric and communication crossings need 60 inches below the lowest crossed grade, water crossings need 60 inches, and pressurized sewer crossings need 60 inches. A bore beneath existing highway pavement goes by boring or tunneling. Iola streets belong to the city, while a BNSF Railway crossing needs an agreement with the railroad. Ragan Creek crossings are checked for U.S. Army Corps of Engineers jurisdiction during planning.
Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.
What is already in the ground in Grimes County near Iola?
The provider for a specific Iola address has to be confirmed with the city, county or local water district before a bore is planned. EPA drinking water records for Texas do not tie water systems to towns, and no system carries Iola’s name, so those records do not identify the provider for an address near FM 39. Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative report electric service in Grimes County; we confirm the line owner before planning an electric conduit bore.
| Line owner | What it is | Source | Size |
|---|---|---|---|
| Entergy Texas, Mid-South Electric Cooperative Association and San Bernard Electric Cooperative | Electric utilities reporting service in Grimes County | EIA Form 861 | Confirm the line owner by address |
The American Community Survey 2019 to 2023 five year estimates put Iola’s median housing year at 1986; 10 percent of units were built before 1960, 67 percent from 1960 to 1999 and 23 percent in 2000 or later. That mix can mean a project is replacing older pipe or adding a newer service along Main Street. Before drilling near a marked utility, we expose each marked line on the bore path with hydrovac potholing because surface paint does not show depth.

What is near Iola, including Kurten?
Iola is in Grimes County, at an elevation of 339 feet, and covers 1.03 square miles. Its ZIP code is 77861. Bedias is 7.9 miles east, Kurten is 11.8 miles west and Wixon Valley is 14.3 miles west. College Station is 18.4 miles southwest, while Anderson, the county seat, is 20.4 miles south. From our Yukon, Oklahoma main office, Iola is 382 road miles away and a 7.5 hour drive, a distance that factors into moving equipment for a bore near FM 39.
Places near Iola
- Directional boring in Bedias: 7.9 miles east
- Directional boring in Kurten: 11.8 miles west
- Directional boring in Wixon Valley: 14.3 miles west
- Directional boring in Madisonville: 16 miles northeast
- Directional boring in Shiro: 16.2 miles southeast
- Directional boring in College Station: 18.4 miles southwest
What boring work comes up near Neches Avenue in Iola?
- Highway crossing: A line beneath FM 39 or FM 244 can be bored under the pavement, with cover and the TxDOT right of way permit set for the route.
- Street service: A water or sewer line beneath Main Street can use pits in the dirt on either side instead of cutting the pavement.
- Fiber route: A conduit bore along Neches Avenue can carry fiber while keeping the street surface uncut.
- Creek crossing: A route beneath Ragan Creek needs depth planning under the channel and a check for federal jurisdiction.
- Rail crossing: A line beneath the BNSF Railway track needs a crossing agreement with the track owner before the route is set.
- Electric conduit: Near Brazos Avenue, we confirm the line owner before planning a conduit bore and locate the crossing path.
More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.
What do you need to quote a bore near BNSF Railway in Iola?
For a quote near BNSF Railway or Main Street, send the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help us understand the route, pits and access before we set the bore approach.
The job details set the price, and the 382 road miles from Yukon affect mobilization to Iola. Zulch soil and clay about 40 inches down can change reaming and fluid needs. A crossing under FM 39 or BNSF Railway adds route planning, while pavement, exposed utilities and creek crossings such as Ragan Creek affect the work. Pit size, excavator time, sand backfill, emergency timing and the overall line length and size also shape the scope.
Questions people ask about boring in Iola
Does Trinity Boring Solutions take jobs in Grimes County near Iola, and who staffs them?
Yes. We take directional boring work in Iola and across Texas, planning each route around its local underground setting. Our own crews handle jobs, and partner drilling contractors from satellite yards may also staff the work after Trinity has vetted them. You work with Trinity from the first call through the bore log, including for a route near FM 39.
Does Zulch soil in Iola create a steel corrosion concern, and what pipe can we use?
The USDA soil survey maps high steel corrosion risk across 96 percent of Iola, so the line owner should consider steel casing and tracer wire materials. HDPE is not affected by that mapped soil corrosion concern. The right choice depends on the line and the owner’s specifications for a route near Zulch soil.
What ground will a directional bore pass through in Iola’s Zulch soil?
The USDA soil survey maps fine sandy loam across 99 percent of Iola’s surface and clay in 67 percent of the area about 40 inches down. Zulch soil covers 64 percent of the city. Those mapped patterns suggest a bore may meet sticky clay that holds an open hole but can build on the reamer and grip the pipe.
Could a directional bore encounter rock along a planned route in Iola?
Bedrock is not mapped in Iola’s top five feet, which does not rule out rock deeper down. The geologic map shows Massive Clay Decomposition Residuum and the Yegua Formation beneath the area, with clay and some sandstone in the mapped descriptions. A route near Ragan Creek still needs site specific planning.
Who approves an Iola bore under FM 39, and which state office reviews it?
The utility owner applies for a right of way permit through TxDOT’s RULIS system, and the TxDOT Bryan District reviews work involving FM 39. We prepare the bore plan and profile for the owner’s application and work under the issued permit. Cover and crossing conditions are set for the proposed line and route.
Who owns the Iola track at BNSF Railway, and what does a bore under it need?
BNSF Railway owns the track mapped in Iola, with 0.44 track miles inside the city. A bore beneath it needs a crossing agreement from the railroad before work proceeds. The agreement sets the crossing conditions, including depth, casing and flagging, so the route has to be planned to those terms.
Does Trinity cover Bedias and rural sites outside Iola?
Yes. We take work across Texas, including Iola, Bedias and rural sites outside city limits. Bedias is 7.9 miles east of Iola, but the address and route determine the actual scope. A job outside the city may involve different road ownership or crossings than one along Main Street.
How much notice does Texas811 need for an Iola bore near Main Street, and what if marks move?
Count back at least two working days from the planned start near Main Street, excluding Saturdays, Sundays and legal holidays. A Texas811 request cannot be made more than 14 days before excavation. If the start slips beyond that 14 day window, make a new request; worn or moved marks must be refreshed through Texas811 before work continues.
For directional boring near FM 39 in Iola, what route conditions affect the cost of a crossing?
The job route and scope determine the price. The 382 road miles from Yukon affect mobilization, while Zulch soil and clay at about 40 inches can influence drilling time and fluid needs. FM 39, BNSF Railway, pavement, utilities to expose, Ragan Creek, pit work, line size and footage can all change the work involved.
Where the Iola facts on this page come from
- USDA Natural Resources Conservation Service, Soil Data Access: soil survey map units inside Iola
- U.S. Census Bureau, TIGER/Line 2024: Iola boundary, roads, rail lines and streams
- U.S. Census Bureau, Vintage 2024 population estimates: Iola
- U.S. Census Bureau, American Community Survey 2019 to 2023: Iola housing units and year built
- Macrostrat geologic map compilation: map units under Iola
- U.S. Department of Transportation, North American Rail Network: track owners in Grimes County
- U.S. Energy Information Administration, Form EIA 861: electric utilities serving Grimes County
- U.S. Geological Survey, Elevation Point Query Service: Iola elevation
- OpenStreetMap road network through the OSRM router: road miles from Yukon, Oklahoma to Iola
- Texas Utilities Code Chapter 251, Underground Facility Damage Prevention and Safety
- TxDOT Utility Accommodation Rules, 43 Tex. Admin. Code 21.40: underground utilities
- Texas Department of Transportation: Right of Way Utility and Leasing Information System (RULIS) utility permits
Get a Quote for a Bore in Iola
Send the address, what is going in, the size and the footage.
Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com
Free Bore Planner
Plan Your Bore in Iola, Texas
Type the address of your job in Iola. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
Talk to the crew that does the work
Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.
Answered by a person, not a call center.
Would rather not call? Send the details and we will come back with a written quote.
County and State Pages for Iola
Same county: Navasota · Plantersville · Anderson · Todd Mission · Pinebrook · Richards. All counties: Texas county list.
