Free Bore Planner
Plan Your Bore in Comanche County, Oklahoma
Type the address of your job in Comanche County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What the USDA Soil Survey Shows in Comanche County
The federal soil survey maps the ground across Comanche County. These figures come from that data and show what a drill crew is likely to meet before the first pothole is dug.
- Most common soils: Foard (14%), Zaneis (11%) and Ashport (10%) by share of county area.
- Surface texture: most often loam (23%) or silt loam (19%).
- Bedrock within 5 feet: recorded on about 43% of the county. It is a mix of hard rock and softer weathered rock. Rock outcrop is mapped on about 10%.
- Clay rich subsoil: about 46% of the county has a layer with 35% clay or more in the top 5 feet.
What that means for a bore: Rock within reach of a typical utility bore is common here, so depth is confirmed by potholing and rock tooling goes on the truck when the path calls for it. Heavy clay is sticky and swells when wet, so the drilling fluid is mixed to keep cuttings moving and the hole open.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database for Comanche County, Oklahoma (survey area OK031, version 23, August 28, 2026), available through Web Soil Survey. Percentages are shares of mapped county area. The survey shows the general pattern. Utility locates and potholing confirm the ground on your bore path.