Directional Boring Contractors in Ector County, TX
Trinity Boring Solutions is a directional boring contractor serving Ector County, Texas, installing water, sewer, gas, electric and fiber lines without an open trench in Odessa and Goldsmith. The Trinity main office in Yukon, Oklahoma is about 449 road miles from Odessa, the county seat. Bores here most often pass under Interstate 20 and US 385, Monahans Draw and Union Pacific track. Call (405) 409-7423 any time.
Free Bore Planner
Plan Your Bore in Ector County, Texas
Type the address of your job in Ector County. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.
What Should You Know Before Boring in Ector County?
Ector County covers 898 square miles, has about 170,022 residents and sits in the TxDOT Odessa District.
| County seat | Odessa |
|---|---|
| Population | 170,022 (2024 Census estimate), up 2.9% since 2020 |
| Land area | 898 square miles |
| Largest cities and towns | Odessa (115,515) and Goldsmith (229) |
| TxDOT district | TxDOT Odessa District |
| 811 center | Texas811 (call 811), two working days of notice |
| Electric utilities | Oncor Electric Delivery Company and Southwestern Public Service |
| Interstate and US highways | Interstate 20 and US 385 |
| State Highways | 158, 191 and 302 |
| State loops and spurs | Loop 338 and Spur 450 |
| Creeks and other streams | Monahans Draw |
| Railroads | Union Pacific, about 32 main line miles |
| Average precipitation | 13.5 inches a year (1991 to 2020) |
| New housing units permitted | 921 in 2025 |
| Road distance from Trinity main office | About 449 miles from Yukon, Oklahoma to Odessa |
| Trinity insurance | General liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability |
Sources: Census Bureau (2024 population, 2025 building permits, TIGER/Line roads and water), EIA Form 861 (2025), NOAA 1991 to 2020 precipitation, federal rail network map, TxDOT districts, OpenStreetMap routing. Checked November 2026.
What Does a Bore Have to Cross in Ector County?
A bore in Ector County most often has to cross a highway such as Interstate 20, US 385 or State Highway 302, Monahans Draw and Union Pacific track. State Highways 158, 191 and 302 also run through the county, along with Loop 338 and Spur 450. The named streams on the Census map are Monahans Draw. The federal rail map shows about 32 miles of main line track in Ector County, owned by Union Pacific.

What Is the Ground Like for Directional Boring in Ector County?
Caliche is the main thing to plan for in Ector County: the federal soil survey maps a cemented caliche layer within five feet of the surface on about 48 percent of the county, under a surface that is most often loam. Caliche in Ector County drills like soft rock, so the bit, the reamer and the drilling fluid are chosen for it. September is the wettest month in Ector County at 1.9 inches on average and February the driest at 0.6. Ector County averages 13.5 inches of precipitation a year, so the ground is usually dry at bore depth.
- Most common soils: Kimbrough (18%), Conger (14%) and Ratliff (12%).
- Surface texture: most often loam (45%) or fine sandy loam (14%).
- Bedrock within 5 feet: rare, on less than 1% of the county.
- Caliche within 5 feet: about 48% of the county.
- Clay rich layer (35% clay or more) in the top 5 feet: about 14% of the county.
- Sandy layer (70% sand or more) in the top 5 feet: about 11% of the county.
Source: USDA Natural Resources Conservation Service, Soil Survey Geographic Database, Ector and Crane Counties, Texas (survey area TX606, version 25, September 8, 2026), through Web Soil Survey. Percentages are shares of mapped county area.
Who Permits a Bore in Ector County?
The TxDOT Odessa District permits bores under state highways in Ector County, the Ector County Commissioners Court handles county roads, and Odessa and Goldsmith each handle their own streets.
- State highways. Interstate 20, US 385, the other numbered state routes and the farm to market roads in Ector County are on the state system. The utility owner files a TxDOT utility permit in RULIS.
- Texas811 locates. Texas811 needs at least two working days of notice before digging (Texas811 FAQ; Texas Utilities Code, Section 251.151).
- Railroads. A bore under Union Pacific track in Ector County needs a crossing agreement from the railroad that owns it, which sets the casing, depth and flagging.
- Water crossings. A bore under Monahans Draw is checked for U.S. Army Corps of Engineers jurisdiction while the path is planned.
Statewide rules are on the Directional Boring Texas page, and Trinity supplies the bore plan and profile for the permit package.
Which Electric Utilities Serve Ector County?
Oncor Electric Delivery Company and Southwestern Public Service serve Ector County, according to 2025 filings with the U.S. Energy Information Administration. All are investor owned utilities. Knowing which one holds the territory at the address is the first step on a conduit bore in Ector County. More on electric line boring.
How Much New Construction Is There in Ector County?
Ector County permitted 921 new housing units in 2025, all single family homes, according to the Census Bureau Building Permits Survey. The population of Ector County went from 165,182 in 2020 to 170,022 in 2024, a gain of 2.9 percent. That pace of building in Ector County puts new water, gas, electric and fiber services under finished pavement.
Which Cities and Towns in Ector County Does Trinity Serve?
Trinity takes directional boring work in all 2 incorporated places in Ector County and at sites outside city limits, and Odessa is the largest with about 115,515 residents.
| City or town | 2024 population |
|---|---|
| Odessa | 115,515 |
| Goldsmith | 229 |
Source: U.S. Census Bureau 2024 estimates, counting only the part of each city inside Ector County.
Ector County borders Andrews County, Crane County, Midland County, Upton County, Ward County and Winkler County; every county is on the Directional Boring in All 254 Texas Counties page. The neighboring county seats are Andrews (Andrews), Crane (Crane), Midland (Midland), Rankin (Upton), Monahans (Ward) and Kermit (Winkler).
Which Directional Boring Services Are Available in Ector County?
Every Trinity service is available in Ector County: horizontal directional drilling from 3/4 inch service lines to 48 inch casing, auger boring, hydrovac potholing, trenching and 24 hour emergency response, all listed under Underground Utility and Boring Services.
- Road, highway, railroad, creek and river bore crossings, including Interstate 20, US 385 and Monahans Draw
- Bores under Union Pacific track, built to the railroad boring requirements of the owner
- Drinkable water line boring and sewer force mains in Odessa or Goldsmith and on rural water systems
- Underground conduit in Oncor Electric Delivery Company and Southwestern Public Service territory, see electric line boring
- Fiber optic boring for ISPs and broadband builders along Interstate 20
- Municipal boring services for cities such as Odessa and Goldsmith
The free Bore Planner sizes an Ector County job before you call.
Ector County Directional Boring FAQs: What Do Customers Ask?
Does Trinity Boring Solutions work in Odessa, Texas?
Yes. Trinity Boring Solutions takes work in Odessa and Goldsmith and the rural parts of Ector County. Trinity works in Texas with its own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted.
Who approves a bore under Interstate 20 in Ector County?
The TxDOT Odessa District. The utility owner files the permit in the TxDOT RULIS system. County roads go through the Ector County Commissioners Court and city streets through the city.
Is there rock in Ector County?
Rarely. The federal soil survey records bedrock within five feet of the surface on less than 1 percent of Ector County. Caliche shows up within five feet on about 48 percent. Potholing confirms it on the actual bore path.
Can a line be bored under Monahans Draw in Ector County?
Yes. A drill is steered below the bed of Monahans Draw from a pit on each bank and the pipe is pulled back through, so the channel is not opened. Federal jurisdiction over the crossing is checked first.
Which railroads have track in Ector County?
Union Pacific, with about 32 miles of main line track on the federal rail map. Each requires its own crossing agreement before a bore goes under the rails.
Is Trinity insured for work in Ector County?
Yes. Trinity Boring Solutions carries general liability of $1,000,000 per occurrence and $4,000,000 aggregate, plus $5,000,000 excess liability. Ask for a certificate with the quote.
How much does directional boring cost in Ector County?
Length and pipe size give us a general range. Depth, the crossings and the ground set the number, and caliche is a factor on many Ector County jobs.
How Do You Get a Bore Quote in Ector County?
Call (405) 409-7423 any time or send the address in Ector County, the utility, the length and what it crosses. Trinity has bored since 1965 and is family owned.