trinityboringsolutions.com

Terrell Hills Texas Directional Boring: Eckrant Cobbly Clay, Pecan Gap Chalk, Loop 368

Quick Answer: Can we get your line beneath Loop 368 or Wiltshire Avenue without opening the pavement? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for Terrell Hills crossings like these. Terrell Hills is 473 road miles from our Yukon, Oklahoma main office, and Loop 368 access is part of planning the route. Eckrant soil is often cobbly clay, and bedrock is mapped within 40 inches across 79 percent of the city. That shallow rock can slow a bore and call for careful steering near Wiltshire Avenue.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Terrell Hills bores at a glance

  • Incorporated city in Bexar County, Texas. Population 5,142 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 473 miles, about 9.1 hours of driving.
  • Ground: Eckrant soil is mapped on 60 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 79 percent of the area.
  • Highways inside the boundary: Loop 368. State permit office: TxDOT San Antonio District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Which contractor handles directional boring in Terrell Hills, Bexar County?

Can we get your line beneath a Terrell Hills street without cutting the pavement? We install water, sewer, gas, electric conduit and fiber beneath streets such as Wiltshire Avenue and Garraty Road. The Census Bureau Vintage 2024 estimate puts Terrell Hills at 5,142 people in Bexar County, so each address and its crossing details matter to the bore plan.

Our main office is in Yukon, Oklahoma, and Terrell Hills work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our longest bore ran roughly 4,100 feet under the Arkansas River in Tulsa, a reach beyond a typical service bore near Loop 368. We are a family business started in 1965, with directional boring work dating to 1982; here, the plan starts with the street and ground at your Terrell Hills address.

Directional drill rig and crew working on a street beside a brick commercial building
Our drill and crew set up on a street beside a brick commercial building. Photos on this page are from our jobs in Oklahoma and Texas.

What ground should you expect in Terrell Hills with Eckrant soil?

The USDA soil survey maps Eckrant soil across 60 percent of Terrell Hills, commonly as cobbly clay with slopes of 1 to 8 percent. Houston Black soil accounts for 21 percent, while Eddy soil accounts for 13 percent and Austin for 6 percent. At about 40 inches below the surface, the mapped texture is bedrock in 79 percent of the area and clay in 21 percent. The survey reports an average clay content of 54 percent at that depth, with no sandy area mapped there. Cobbles and sticky clay can affect steering and make the reamer carry soil, so the plan for a bore near Wiltshire Avenue must account for the specific route.

USDA soil survey, inside the Terrell Hills city limitsWhat is mapped
Soil series mappedEckrant 60 percent, Houston Black 21 percent, Eddy 13 percent and Austin 6 percent
Texture at the surfacecobbly clay 60 percent, gravelly clay loam 13 percent and gravelly clay 10 percent
Texture about 40 inches downbedrock 79 percent and clay 21 percent
Engineering class about 40 inches downfat clay (CH) 21 percent
Average clay content about 40 inches down54 percent
Bedrock mapped within 60 inches79 percent of the area (60 percent hard rock, 19 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel87 percent of the area

Bedrock is mapped within 60 inches across 79 percent of Terrell Hills: hard bedrock in 60 percent and weathered bedrock in 19 percent. The typical mapped depth is 11 inches, so a bore near Eckrant soil may reach rock early and need slower drilling or rock tooling. The USDA soil survey maps no seasonal water table within 60 inches and no flood prone soils. High steel corrosion risk covers 87 percent of the area, a concern for uncoated casing or tracer wire. The geologic map identifies Pecan Gap Chalk of Campanian age in the northeastern map area; the map is regional guidance, not a test at a specific Garraty Road address.

How do we bore Terrell Hills ground with shallow bedrock?

Eckrant cobbly clay and shallow mapped bedrock make a Terrell Hills bore a route specific job. We check the ground and utility marks before choosing tooling and drilling beneath streets such as Garraty Road.

  1. At Eckrant soil sites, we watch for cobbles that can deflect the drill head, checking its depth and pitch as each rod advances beneath Terrell Hills streets.
  2. Where the Terrell Hills survey maps shallow hard bedrock, we slow the bore and choose tooling for rock rather than treating the route like ordinary clay.
  3. The survey maps heavy clay at 40 inches in 21 percent of Terrell Hills; we manage drilling fluid carefully so pressure does not lift pavement near Wiltshire Avenue.
  4. Before a bore crosses a marked line near Garraty Road, we hydrovac pothole to expose it; then a surface locator tracks the head and we log depth and pitch.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

What could a new line cross in Terrell Hills near Wiltshire Avenue?

Loop 368 is the state highway inside Terrell Hills, with 0.1 mapped roadway miles in the city; US 281 is 0.8 miles beyond the limits. The longer street routes include Wiltshire Avenue at 1.9 miles, Morningside Drive at 1.75 miles and Canterbury Hill Street at 1.64 miles. Those street lengths help identify possible alignments, but the address and crossing determine the actual bore. A bore can pass beneath pavement rather than cutting across a Wiltshire Avenue driveway or roadway, subject to the applicable permit and the utilities already in the ground.

CrossingTypeMapped extentWho has a say
Loop 368State highway0.1 roadway miles insideState highway office
US 281Highway nearby0.8 miles outsideState highway office
Olmos CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
San Antonio RiverStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Salado CreekStream nearby0.5 miles outsideChecked for Corps of Engineers jurisdiction
Walzem CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

Terrell Hills has no mapped railroad inside its limits or within one mile outside them, and no mapped street and rail crossings. No named stream runs inside the city; Olmos Creek is 0.4 miles from the limits, and the San Antonio River and Salado Creek are each 0.5 miles away. There are 0.51 miles of unnamed drainage mapped in the city, but no street crossings of named streams are mapped. If a proposed line reaches Olmos Creek, its route and any federal jurisdiction need review during planning; no lakes or ponds are mapped within one mile.

Who approves a bore under Loop 368 in Terrell Hills?

Terrell Hills is an incorporated city, so its city streets belong to the city; Loop 368 is a state highway and its right of way follows TxDOT rules. For a Loop 368 crossing, electric and communication lines need 60 inches of cover below the lowest crossed grade, and water lines also need 60 inches; pressurized sewer needs 60 inches. The line owner, not the drilling contractor, submits a highway utility application through TxDOT RULIS. The TxDOT San Antonio District reviews it, while we provide the bore plan and profile and work under the utility owner’s permit. A possible Olmos Creek crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose buried lines should you check in Terrell Hills, Bexar County?

The water provider for a specific Terrell Hills address must be confirmed with the city, Bexar County or the local water district before a bore is planned; EPA drinking water records do not match a provider to the city. Utilities reporting electric service in Bexar County include City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative. Those reports do not identify the provider at every address, so the line owner must be confirmed before planning a conduit bore along Garraty Road.

Line ownerWhat it isSourceSize
City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Bexar CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Terrell Hills’ median housing year at 1957; 61 percent of housing was built before 1960, 26 percent from 1960 to 1999, and 13 percent in 2000 or later. That age mix can mean a project replaces an older line or adds a new service near Morningside Drive. We hydrovac pothole every marked utility on the bore path before drilling near it. For example, a proposed bore beneath Wiltshire Avenue calls for exposing marked lines first because paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

Do you cover Terrell Hills and nearby Olmos Park?

Terrell Hills is an incorporated city in Bexar County, at an elevation of 794 feet and covering 1.61 square miles. Its ZIP code is 78209. Alamo Heights is 1.3 miles west, and Olmos Park is 2.4 miles west; San Antonio, the county seat and nearest larger city, is 4.8 miles west. Our Yukon, Oklahoma yard is 473 road miles away, a 9.1 hour drive. Those distances matter when we plan crew and equipment mobilization for a Terrell Hills bore near Loop 368 or one of its residential streets.

Places near Terrell Hills

Which jobs call for a bore near Terrell Hills and Olmos Creek?

  • Street crossing: A bore beneath Wiltshire Avenue can keep a new water or fiber line out of the pavement, with marked utilities exposed first.
  • Highway crossing: A line beneath Loop 368 needs a route and cover plan that fits the state highway permit and the utility owner’s application.
  • Utility service: A service near Canterbury Hill Street needs its address specific water provider and the existing buried lines checked before the bore is set.
  • Creek crossing: If a proposed route reaches Olmos Creek beyond the Terrell Hills limits, the channel route and federal jurisdiction need review during planning.
  • Electric conduit: A conduit route near Garraty Road starts with confirming the electric line owner because county service reports do not identify every address.
  • Rock bore: Where shallow bedrock is mapped near Morningside Drive, the bore may need slower drilling and rock suitable tooling.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Terrell Hills quote near Garraty Road?

For a Terrell Hills quote, send the address or map pin, what will go in the ground, the pipe or conduit size, and the footage; a sketch or plans help. A location near Garraty Road gives us a street reference, but the route and access still shape the bore plan. We use those details to assess the line path and what it must pass beneath.

The price turns on the actual Terrell Hills scope: length, pipe or conduit size, soil and rock, utilities to expose, pavement, crossings, pits, excavator time and backfill. Eckrant cobbly clay and shallow mapped bedrock can add drilling time. A Loop 368 crossing brings state permit and cover requirements into the plan, while a creek or drainage crossing adds route review. The 473 road miles from Yukon also affect mobilization. Send the address and line details so we can judge which of those factors applies.

Questions people ask about boring in Terrell Hills

Does Trinity Boring Solutions take directional boring work in Terrell Hills, Bexar County, and who staffs it?

Yes. We take Terrell Hills work in Bexar County and staff it with our crews or through satellite yards operated by drilling partners we have vetted. You work with Trinity from the first call through the bore log, whichever crew is at the job. A street such as Wiltshire Avenue helps us locate the proposed route.

Is there rock under Terrell Hills, and how much bedrock is mapped?

Yes, shallow rock is a major consideration in Terrell Hills. The USDA soil survey maps bedrock within 60 inches across 79 percent of the city, including hard bedrock in 60 percent and weathered bedrock in 19 percent. The mapped typical depth is 11 inches, so a bore near Eckrant soil may encounter rock early.

Who approves a bore beneath Loop 368 in Terrell Hills?

TxDOT handles the state highway permit, with review by the TxDOT San Antonio District. The utility owner files through TxDOT’s RULIS system, and we provide the bore plan and profile. For a Terrell Hills Loop 368 crossing, cover requirements depend on the line type and the permitted route.

Can you bore a line beneath Olmos Creek near Terrell Hills?

A bore can be planned for a route beneath Olmos Creek, which lies 0.4 miles from Terrell Hills’ limits. The crossing location and channel conditions must be assessed, and the route is checked for U.S. Army Corps of Engineers jurisdiction during planning. We need the proposed line path before assessing the crossing.

Who owns electric lines in Terrell Hills, Bexar County, and who confirms conduit specs?

Electric providers reporting service in Bexar County include City of San Antonio and four electric cooperatives: Bandera, Guadalupe Valley, Karnes and Pedernales. Those reports do not establish which utility serves a particular Terrell Hills address. Confirm the line owner and conduit requirements for the planned route near Garraty Road before the bore is designed.

Are Terrell Hills streets city streets, and must Canterbury Hill Street be cut?

Terrell Hills is incorporated, so its city streets belong to the city. A bore can place a line beneath Canterbury Hill Street without cutting the pavement, subject to the route, existing utilities and applicable approvals. We expose marked utilities along the path before drilling near them because surface paint does not show their depth.

Does Trinity cover Terrell Hills, Alamo Heights and rural sites outside the limits?

Yes. We serve Terrell Hills and take work across Texas, including nearby Alamo Heights and sites outside city limits. The Yukon, Oklahoma main office is 473 road miles from Terrell Hills, so the job location and scope help us plan mobilization. For a route near Loop 368, include the crossing details with the address.

How much 811 notice does a Terrell Hills bore near Wiltshire Avenue need, and what if marks fade?

Texas811 requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Texas811 describes that as at least two working days. If marks near Wiltshire Avenue wear off or move, request refreshed marks before work continues; a delayed start beyond the notice window needs a new request.

What affects the cost of a Terrell Hills bore under Loop 368?

The job scope sets the cost, including length, line size, soil and rock, exposed utilities, pavement, crossing count, pits and equipment time. A Loop 368 crossing adds highway permit and cover planning, while Eckrant soil and shallow bedrock may change drilling time. Mobilization from Yukon also matters because Terrell Hills is 473 road miles from the yard.

Where the Terrell Hills facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Terrell Hills

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Terrell Hills, Texas

Type the address of your job in Terrell Hills. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Terrell Hills

Same county: Converse · Universal City · Live Oak · Timberwood Park · Leon Valley · Helotes · Lackland AFB · Selma · Fair Oaks Ranch · Schertz · Sandy Oaks · Scenic Oaks. All counties: Texas county list.