trinityboringsolutions.com

Alamo Beach Texas Directional Boring: Livia Clay Loam, FM 2717 and Delta Sand and Silt

Quick Answer: Alamo Beach is an unincorporated community in Calhoun County, so it has no city government; we bore beneath streets such as Quailrun Avenue for utility routes. We do directional boring, also called horizontal directional drilling (HDD), for work near FM 2717. The Yukon, Oklahoma main office is 535 road miles away, with FM 2760 among the local routes to consider for access. Livia clay loam and heavy clay can make reaming sticky and cause soil to grip pipe, so the bore plan must account for the ground.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Alamo Beach bores at a glance

  • Unincorporated community in Calhoun County, Texas. Population 254 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 535 miles, about 10.9 hours of driving.
  • Ground: Livia soil is mapped on 50 percent of the area, with clay about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 2717 and FM 2760. State permit office: TxDOT Yoakum District.
  • Railroad track inside the boundary: none mapped.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near FM 2717 in Alamo Beach?

Alamo Beach is an unincorporated community in Calhoun County, so there is no city government; street authority is county or state, depending on the road. The Census Bureau counted 254 residents in 2020, the count available for this unincorporated place. We install water, sewer, gas, electric conduit and fiber along routes such as Quailrun Avenue or toward FM 2760, with the line and crossing plan set for the specific address.

Our main office is in Yukon, Oklahoma, and Alamo Beach work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our family business started in 1965, and we have done directional boring since 1982. For routes around FM 2717, our work ranges from 3/4 inch service lines to 48 inch casing, depending on the line and crossing.

Trinity Boring Solutions branded compact directional drilling unit positioned beside a tree on a red dirt jobsite
Our compact directional drill set up beside a tree on a tight site. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Livia soil in Alamo Beach?

The USDA soil survey maps Livia soil across 50 percent of Alamo Beach; Livia clay loam with 0 to 1 percent slopes covers 36 percent. Francitas clay loam covers 21 percent and Palacios loam covers 16 percent, so shallow conditions can vary along streets such as Dolphin Avenue. Clay loam is the mapped surface texture across 57 percent of the area. At about 40 inches, clay is mapped across 37 percent and clay loam across 36 percent, with average clay content of 44 percent. Heavy clay is mapped under 87 percent of the area at that depth, where it can ball on a reamer and grip pipe.

USDA soil survey, inside the Alamo Beach mapped community boundaryWhat is mapped
Soil series mappedLivia 50 percent, Francitas 21 percent and Palacios 16 percent
Texture at the surfaceclay loam 57 percent, loam 16 percent and silt loam 14 percent
Texture about 40 inches downclay 37 percent, clay loam 36 percent and silty clay 8 percent
Engineering class about 40 inches downfat clay (CH) 87 percent
Average clay content about 40 inches down44 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches87 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel87 percent of the area

The USDA soil survey maps no bedrock within 60 inches in Alamo Beach, so bedrock is not mapped in the top five feet; that does not rule out deeper rock. A seasonal water table is mapped within 60 inches across 87 percent of the area, which can put water in pits. High steel corrosion risk covers 87 percent, so the line owner should choose protection for steel casing or tracer wire; HDPE is not affected by that soil corrosion concern. Flood prone soils are not mapped. The geologic map unit is Delta sand and silt of Late Pleistocene age, with sand, silt, clay and gravel, so a bore may meet mixed materials.

What does it take to bore clay in Alamo Beach?

Alamo Beach has heavy clay and a shallow seasonal water table across much of its mapped area. We set the reaming and fluid plan around those conditions and the street or highway crossing.

  1. With heavy clay mapped under 87 percent of Alamo Beach at about 40 inches, we use thinner drilling fluid with polymer and ream in stages to limit clay buildup.
  2. Because the seasonal water table is mapped within 60 inches across 87 percent of the area, we keep pits small and pump water when needed.
  3. The heavy clay around FM 2760 can grip the pipe and build pressure, so we watch fluid returns and pull the pipe the same day the hole is opened.
  4. For a planned line beneath Quailrun Avenue, we hydrovac each marked utility before drilling near it, then track the drill head and record depth and pitch.
Bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City
A bore pit with a 6 inch PVC sleeve, traffic cones and blue water line flags at NE 24th Street in Oklahoma City.

What does a bore have to cross on Quailrun Avenue in Alamo Beach?

FM 2717 and FM 2760 run inside the mapped Alamo Beach community boundary, while FM 2117 runs along or touches it and Texas State Highway 316 is 0.8 miles away. State highway work has different requirements from a local street bore. Quailrun Avenue is the longest named street at 2.46 miles; Washington Avenue measures 0.96 miles and Dolphin Avenue 0.92 miles. A bore can keep pavement and driveways uncut, with entry and exit pits placed off the travel surface where the plan allows.

CrossingTypeMapped extentWho has a say
FM 2717State highway1 roadway miles insideState highway office
FM 2760State highway0.9 roadway miles insideState highway office
FM 2117Highway nearbyRuns along or touches the city limitsState highway office
Texas State Highway 316Highway nearby0.8 miles outsideState highway office
Swipe the table sideways to see every column.

No railroad is mapped inside Alamo Beach or within 1 mile, and no mapped street and rail crossing is shown. No named streams are mapped inside the community or within 1 mile, and no street crossing of a named stream is mapped. The area has 0.25 miles of unnamed drainage, so a route near that drainage needs a site specific review. No lakes or ponds are mapped within 1 mile of Alamo Beach.

Who has to sign off on a bore in Calhoun County near Alamo Beach?

Alamo Beach has no city government, so a local street bore such as one on Quailrun Avenue goes through the responsible county authority, while a state highway right of way is handled by TxDOT. FM 2717 and FM 2760 are state highways, and the TxDOT Yoakum District reviews utility permit applications for Calhoun County. The utility owner, not the drilling contractor, files through TxDOT’s RULIS system; we prepare the bore plan and profile and work under the permit issued to that utility. No railroad is mapped within 1 mile. If a route crosses the unnamed drainage, the water crossing is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities are reported in Calhoun County near Alamo Beach?

The water provider for an Alamo Beach address could not be matched from EPA drinking water records because those records do not tie systems to towns and no system carries this place’s name. Confirm the provider for the specific address with Calhoun County or the local water district before planning a bore near Quailrun Avenue. AEP Texas Central, Jackson Electric Cooperative and Victoria Electric Cooperative report electric service in Calhoun County. That does not identify the line owner at every Alamo Beach address, so confirm the owner before setting conduit specifications.

Line ownerWhat it isSourceSize
AEP Texas Central, Jackson Electric Cooperative and Victoria Electric CooperativeElectric utilities reporting service in Calhoun CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Alamo Beach’s median housing year at 1977; 66 percent of housing was built from 1960 to 1999 and 34 percent in 2000 or later. A route on Washington Avenue could serve an older connection being replaced or a newer service, so we check the actual alignment. We hydrovac pothole each marked utility on the bore path before drilling near it; paint shows position, not depth.

Large HDPE conduit reels staged on a Rotate A Reel trailer for a fiber and utility installation in Oklahoma
HDPE conduit reels on a reel trailer for a fiber and utility installation in Oklahoma.

How far is Alamo Beach from Port Lavaca and our Yukon yard?

Alamo Beach is in Calhoun County, five miles southeast of the county seat and nearest larger city, Port Lavaca. The community covers 0.76 square miles, sits at an elevation of 11 feet and uses ZIP code 77979. Magnolia Beach is 1.2 miles southeast; Point Comfort is 6.7 miles north, Port O’Connor is 12.4 miles southeast and Seadrift is 14.4 miles southwest. From the Yukon, Oklahoma main office, the drive is 535 road miles and 10.9 hours. That distance is part of planning access for work near FM 2717.

Places near Alamo Beach

What boring work comes up near Dolphin Avenue in Alamo Beach?

  • Highway crossing: A route under FM 2717 is planned as a bore beneath the roadway, with the utility owner’s TxDOT permit in place.
  • Water service: A service route near Washington Avenue needs the water provider confirmed for its address before the bore is laid out.
  • Fiber conduit: A fiber route along Dolphin Avenue can be bored beneath pavement, with marked utilities exposed before the drill approaches.
  • Street crossing: A bore beneath Quailrun Avenue can leave the roadway uncut, with pits located for the specific alignment.
  • Drainage crossing: A route near the 0.25 miles of unnamed drainage needs the alignment checked for a possible water crossing.
  • Electric conduit: Near FM 2760, the electric line owner must be identified before conduit size and route are set.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near Alamo Beach Avenue?

For a route near Alamo Beach Avenue, send the address or map pin, what will go underground, the pipe or conduit size and the footage. A sketch or plans help show whether the route approaches FM 2717, a driveway or another utility. Those details let us assess the path and the access needed for pits.

The price follows the work involved. Ground conditions matter: Livia clay loam and heavy clay can call for staged reaming and careful fluid control. Crossings matter too, including utilities to expose and pavement or drainage along a route near FM 2717 or Alamo Beach Avenue. Pipe size, bore length, pit work, excavator time and sand backfill also affect the scope. Mobilization is part of planning because Alamo Beach is 535 road miles from our Yukon yard; high profile or emergency work can add demands.

Questions people ask about boring in Alamo Beach

Does Trinity Boring Solutions take directional boring jobs in Calhoun County near Alamo Beach?

Yes. We take directional boring work in Alamo Beach and across Texas. The Yukon office stays the main point of contact, and the work is staffed by our crews or partner drilling contractors we have vetted. That applies to a route near FM 2717 as well as one on Quailrun Avenue.

Will a bore in Alamo Beach hit rock below Livia soil?

Rock is possible at depth, but the USDA soil survey does not map bedrock within 60 inches in Alamo Beach. The geologic map shows Delta sand and silt of Late Pleistocene age, with sand, silt, clay and gravel. We plan from the mapped conditions but do not treat the soil survey as a test boring.

Who approves a bore under FM 2717 in Alamo Beach?

The utility owner applies for the TxDOT utility permit when work uses the FM 2717 right of way. The TxDOT Yoakum District reviews it for Calhoun County through RULIS. We provide the bore plan and profile and work under the permit issued to the utility owner.

Which electric company owns the line for a conduit bore in Calhoun County near Alamo Beach?

AEP Texas Central, Jackson Electric Cooperative and Victoria Electric Cooperative report electric service in Calhoun County, but that does not identify the provider for every Alamo Beach address. We confirm the existing line owner and conduit requirements with that owner before planning a bore near Washington Avenue.

Who controls Dolphin Avenue in Alamo Beach, and does a bore require cutting the street?

Alamo Beach has no city government, so authority for Dolphin Avenue is county or state based on the road, not a city street department. Directional boring can pass beneath pavement without an open cut. If a route enters a state highway right of way, TxDOT handles that permit.

Are buried lines on Washington Avenue in Alamo Beach likely to be old?

The American Community Survey 2019 to 2023 five year estimates put the median housing year in Alamo Beach at 1977. That does not date a particular buried line, but a Washington Avenue project may replace an existing service or add a new one. We expose marked utilities before drilling near them.

Does Trinity cover Magnolia Beach and rural sites outside Alamo Beach?

Yes. We take work across Texas, including Magnolia Beach, 1.2 miles southeast of Alamo Beach, and rural sites beyond the mapped community boundary. The Yukon office remains the main contact, and the route, access and ground conditions are reviewed for each address.

How much Texas811 notice is needed for a bore on Quailrun Avenue in Alamo Beach?

Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start slips more than 14 days past the original notice, a new request is needed. Worn or moved marks on Quailrun Avenue must be refreshed through Texas811 before work continues.

What affects the cost of directional boring near FM 2717 in Alamo Beach?

The cost depends on bore length and pipe or conduit size, the heavy clay mapped in Alamo Beach, and the utilities or pavement along the route. Pit and excavator work, drainage crossings and sand backfill can also affect the scope. Mobilization matters because the Yukon yard is 535 road miles away.

Where the Alamo Beach facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Alamo Beach

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Alamo Beach, Texas

Type the address of your job in Alamo Beach. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Alamo Beach

All counties: Texas county list.