trinityboringsolutions.com

Lowry Crossing Texas Directional Boring: Houston Black Clay, US 380 and East Fork Trinity River

Quick Answer: At Lowry Crossing, the USDA soil survey maps Houston Black clay through about 40 inches, with weathered bedrock mapped within five feet in 19 percent of the area. Trinity Boring Solutions performs directional boring, also called horizontal directional drilling (HDD), for routes beneath US 380 and the East Fork Trinity River. That work is 218 road miles from our Yukon, Oklahoma main office, and FM 546 is another local route that may shape access. Heavy Houston Black clay can cling to the reamer, so we plan staged passes and manage drilling fluid.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Lowry Crossing bores at a glance

  • Incorporated city in Collin County, Texas. Population 2,028 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 218 miles, about 4.5 hours of driving.
  • Ground: Houston Black soil is mapped on 54 percent of the area, with clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 19 percent of the area.
  • Highways inside the boundary: US 380 and FM 546. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: East Fork Trinity River.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near US 380 in Lowry Crossing?

Lowry Crossing is in Collin County, where the Census Bureau Vintage 2024 estimate puts the population at 2,028. Along Bridgefarmer Road and US 380, we can bore water, sewer, gas, electric conduit or fiber routes without opening the full surface. We also take on service lines and longer runs, with the route and access shaping the plan.

Our main office is in Yukon, Oklahoma, and Lowry Crossing work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a small service along Myrick Lane or a larger 48 inch casing bore near US 380, our work ranges from 3/4 inch lines to 48 inch casing. We are a family business started in 1965, with directional boring work dating to 1982.

Trinity Boring Solutions directional boring crew, drill rig and hydrovac trailer staged along an airport service road at Will Rogers World Airport in Oklahoma City
Our boring crew, drill and hydrovac trailer staged along a service road at Will Rogers World Airport in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show about Houston Black soil in Lowry Crossing?

The USDA soil survey maps the Houston Black series across 54 percent of Lowry Crossing. Houston Black clay map units cover 37 percent of the area on 1 to 3 percent slopes and 15 percent on 0 to 1 percent slopes. At about 40 inches below the surface, clay is mapped under 66 percent of the city. These shares describe mapped ground, not a test at a particular bore location. Heavy clay can stay open but stick to the reamer, so the plan needs staged reaming and careful fluid control.

USDA soil survey, inside the Lowry Crossing city limitsWhat is mapped
Soil series mappedHouston Black 54 percent, Austin 14 percent, Heiden 6 percent, Lewisville 6 percent and Tinn 6 percent
Texture at the surfaceclay 66 percent, silty clay 27 percent and clay loam 4 percent
Texture about 40 inches downclay 66 percent, bedrock 19 percent and silty clay 10 percent
Engineering class about 40 inches downfat clay (CH) 73 percent and lean clay (CL) 8 percent
Average clay content about 40 inches down51 percent
Bedrock mapped within 60 inches19 percent of the area (0 percent hard rock, 19 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils10 percent of the area
High corrosion risk for uncoated steel97 percent of the area

The soil survey maps weathered bedrock within 60 inches on 19 percent of Lowry Crossing, with a typical bedrock depth of 24 inches; hard bedrock is not mapped in that depth range. No seasonal water table is mapped within 60 inches, while flood prone soils cover 10 percent. High steel corrosion risk is mapped across 97 percent, so the line owner should address casing and tracer wire material or coatings. The geology map lists Austin Chalk of Late Cretaceous age; weathered chalk may slow the bore compared with dirt.

How do we bore through clay in Lowry Crossing?

Houston Black clay is the main mapped ground in Lowry Crossing, and it can hold an open hole while sticking to tooling. We adjust the fluid and reaming sequence to the ground along each route.

  1. Houston Black clay can ball on the reamer, so we use thinner drilling fluid with polymer and open the hole in stages along routes such as Bridgefarmer Road.
  2. Where heavy clay lines a Myrick Lane bore, we watch fluid returns and keep pressure controlled so drilling fluid does not lift nearby pavement.
  3. Before drilling near a marked line on US 380, we hydrovac pothole to expose it; the surface marks do not show its depth.
  4. We track the drill head from the surface and log depth and pitch, including on a route planned near the East Fork Trinity River.
Walkover locator held over a flowing creek while tracking the drill head on a 385 foot rock bore in Guthrie, Oklahoma
Tracking the drill head with a walkover locator over a flowing creek on a 385 foot bore in Guthrie, Oklahoma.

Which roads and waterways affect a bore near the East Fork Trinity River in Lowry Crossing?

US 380 has 1.6 mapped roadway miles inside Lowry Crossing, and FM 546 has 0.6. A bore within either highway right of way needs a TxDOT permit through the utility owner. Bridgefarmer Road is the longest named street at 2.5 miles in the city, followed by Overland Drive at 1.6 miles and Myrick Lane at 1.24 miles. These routes give a project team specific access points to check before setting bore pits or choosing an alignment.

CrossingTypeMapped extentWho has a say
US 380US highway1.6 roadway miles insideState highway office
FM 546State highway0.6 roadway miles insideState highway office
East Fork Trinity RiverStream1.36 channel miles insideChecked for Corps of Engineers jurisdiction
Big Branch CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped within Lowry Crossing or within one mile outside its limits, so the mapped street and rail crossing count is none. The East Fork Trinity River runs for 1.36 channel miles in the city, and no street crossing of a named stream is mapped. Big Branch Creek is 0.1 miles from the city limits. A route under the East Fork needs a site review, and mapped flood prone soils cover 10 percent of the area.

Who approves a bore in Collin County near Lowry Crossing?

Lowry Crossing is incorporated, so its city streets belong to the city itself. Work in the right of way of US 380 or FM 546 needs a TxDOT utility permit reviewed by the TxDOT Dallas District. The utility that owns the line submits through TxDOT’s RULIS system, and we prepare the bore plan and profile for that application. For an electric or communication line crossing either highway, the cover requirement is at least 60 inches below the lowest crossed grade; water lines need 60 inches, and pressurized sewer lines need 60 inches. A crossing of the East Fork Trinity River is checked for U.S. Army Corps of Engineers jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Who owns utility lines in Collin County near Lowry Crossing?

The water provider for a specific Lowry Crossing address has to be confirmed with the city, Collin County or the local water district before a bore is planned. Electric service providers reporting in Collin County include Oncor Electric Delivery Company, Texas-New Mexico Power, Denton County Electric Cooperative, Fannin County Electric Cooperative, Farmers Electric Cooperative and Grayson-Collin Electric Cooperative. The line owner must be identified for the address before an electric conduit bore is planned.

Line ownerWhat it isSourceSize
Oncor Electric Delivery Company, Texas-New Mexico Power, Denton County Electric Cooperative, Fannin County Electric Cooperative, Farmers Electric Cooperative and Grayson-Collin Electric CooperativeElectric utilities reporting service in Collin CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median year built for Lowry Crossing housing at 1994; 2 percent was built before 1960, 62 percent from 1960 to 1999, and 36 percent in 2000 or later. A Myrick Lane project could involve replacement work or a newer service, but the age figures do not show the condition of a buried line. We hydrovac pothole each marked utility on the route before the drill approaches it, since paint shows position, not depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

What is near Lowry Crossing and Princeton?

Lowry Crossing is an incorporated city in Collin County, at an elevation of 531 feet and covering 2.59 square miles. Its ZIP codes are 75069 and 75407. Princeton is 2.3 miles northeast and is the nearest larger city; New Hope is 3.0 miles north. Fairview is 4.4 miles southwest, Lucas is 5.2 miles southwest, and Seis Lagos is 6.9 miles south. McKinney, the county seat, is 7.2 miles west. Our Yukon, Oklahoma main office is 218 road miles away, a drive of 4.5 hours.

Places near Lowry Crossing

What would we bore along Bridgefarmer Road in Lowry Crossing?

  • Highway crossing: A route beneath US 380 or FM 546 is bored under the roadway, with the utility owner handling the TxDOT permit.
  • Water service: A service bore near Bridgefarmer Road can reach a property without opening a trench along the full route.
  • Fiber conduit: A conduit run near Myrick Lane can pass beneath pavement, with marked utilities exposed before the drill approaches them.
  • Creek crossing: A proposed route under the East Fork Trinity River needs planning for the channel and a check of federal jurisdiction.
  • Street route: A bore along Overland Drive can avoid cutting the surface while connecting a utility route between work pits.
  • Service line: A 3/4 inch line near FM 546 is within our size range, with the route and ground setting the bore plan.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

How do I get a quote for work near US 380 in Lowry Crossing?

For a quote on US 380 or Bridgefarmer Road, send the address or map pin, what is going in the ground, the pipe or conduit size and footage; a sketch or plans help. The route matters because the East Fork Trinity River and the mapped Houston Black clay can change the bore setup. A clear alignment also helps us identify the marked utilities to expose before drilling.

Mobilization starts with the 218 road miles between Yukon and Lowry Crossing, then Houston Black clay and any weathered bedrock along the route affect the drilling plan. Length, pipe or conduit size, and the number of utilities to cross and expose also shape the price. A US 380 right of way, pavement, or an East Fork Trinity River crossing can add planning and equipment needs. Pits, excavator time, sand backfill, high profile work and emergency timing can also change the job scope.

Questions people ask about boring in Lowry Crossing

Does Trinity Boring Solutions take directional boring jobs in Collin County near Lowry Crossing?

Yes. We take directional boring work in Lowry Crossing and across Collin County. Our Yukon main office is 218 road miles away, and work is handled by our crews or by crews at partner drilling contractors we have vetted. You work with Trinity from the first call through the bore log, including on a route near US 380.

Is there rock under Lowry Crossing, and how much bedrock is mapped within five feet?

Weathered bedrock is mapped within 60 inches on 19 percent of Lowry Crossing, with a typical depth of 24 inches. Hard bedrock is not mapped in that range. The geology map lists Austin Chalk, so a route near Bridgefarmer Road may encounter slower drilling in weathered rock rather than only clay.

Who approves a bore under US 380 in Lowry Crossing, and which TxDOT office reviews it?

The utility owner applies for a TxDOT utility permit in RULIS, and the TxDOT Dallas District reviews work in the US 380 right of way. We provide the bore plan and profile for the utility owner’s application. The required cover depends on the line type and the permit conditions for that highway crossing.

Can a line be bored under the East Fork Trinity River in Lowry Crossing?

A bore can be planned under the East Fork Trinity River, subject to the route and site review. The river has 1.36 channel miles in Lowry Crossing, and planning checks whether the crossing falls under U.S. Army Corps of Engineers jurisdiction. Mapped flood prone soils cover 10 percent of the city, so the channel alignment needs attention.

Who owns electric lines in Collin County near Lowry Crossing, and who confirms conduit specs?

The line owner depends on the address, so confirm it before planning an electric conduit bore near US 380. Utilities reporting electric service in Collin County include Oncor Electric Delivery Company, Texas-New Mexico Power and several cooperatives. The owner of the specific line confirms its conduit requirements and handles any highway permit application.

Who is in charge of Myrick Lane in Lowry Crossing, and does a bore require cutting it?

Lowry Crossing is incorporated, so Myrick Lane is a city street. Directional boring can pass under the street without cutting the roadway; pits sit in the ground on either side of the bore. We expose marked utilities along the planned path before drilling near them.

Does Trinity cover Princeton and rural sites outside Lowry Crossing?

Yes. We take work near Princeton, 2.3 miles northeast of Lowry Crossing, and at rural sites outside the city limits. For a route near FM 546 or beyond it, the address, access, ground and utility crossings help determine the crew and bore plan.

How much notice does Texas811 need for a bore near Bridgefarmer Road in Lowry Crossing?

Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. Texas811 describes this as at least two working days. If a Bridgefarmer Road start slips more than 14 days past the original notice, submit a new request; have worn or moved marks refreshed through Texas811 before work continues.

What affects the cost of directional boring under US 380 in Lowry Crossing?

The job details set the price, including length, pipe or conduit size, ground, crossings and access. Houston Black clay can affect the drilling sequence, while a US 380 crossing adds highway permit and cover planning. Mobilization from the Yukon office, pavement, exposed utilities, pits, excavator time and any East Fork Trinity River crossing also affect the scope.

Where the Lowry Crossing facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Lowry Crossing

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Lowry Crossing, Texas

Type the address of your job in Lowry Crossing. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Lowry Crossing

Same county: Plano · McKinney · Frisco · Allen · Wylie · Dallas · Celina · Richardson · Prosper · Anna · Melissa · Murphy. All counties: Texas county list.