trinityboringsolutions.com

Balch Springs Texas Directional Boring: Rader Soil, Interstate 20 And Hickory Creek

Quick Answer: Can you get a line under Interstate 20 or Hickory Creek without cutting the pavement or bank? We do directional boring, also called horizontal directional drilling (HDD), for Balch Springs crossings like these. The route is 233 road miles from our Yukon, Oklahoma main office, including locations along Belt Line Road. Rader soil is common here, and sticky clay can grip the pipe, so the bore needs careful fluid and reaming control.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Balch Springs bores at a glance

  • Incorporated city in Dallas County, Texas. Population 27,307 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 233 miles, about 4.6 hours of driving.
  • Ground: Rader soil is mapped on 48 percent of the area, with sandy clay about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 10 percent of the area.
  • Highways inside the boundary: Interstate 20, Interstate 635 and US 175. State permit office: TxDOT Dallas District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Hickory Creek and South Mesquite Creek.
  • Public water: City of Balch Springs, surface water bought from another system.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who handles directional boring near Hickory Creek in Balch Springs?

Can you get a line under a road or creek without cutting it? We take directional boring work in Balch Springs, Dallas County, where the Census Bureau Vintage 2024 estimate puts the population at 27,307. We install water, sewer, gas, electric conduit and fiber, including routes beneath Belt Line Road or Hickory Creek where an open cut would disturb the crossing.

Our main office is in Yukon, Oklahoma, and Balch Springs work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. For a short service connection as small as 3/4 inch or a large casing job up to 48 inch, the route under Interstate 20 sets very different demands. Our family business started in 1965, and we have done directional boring since 1982.

Aerial view of a bore pit with drill rig and conduit alongside a directional drill rig and conduit on a concrete lot
Our crew at a bore pit beside the directional drill on a conduit job, seen from above. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show beneath Balch Springs and Rader soil?

The USDA soil survey maps Rader soil across 48 percent of Balch Springs. At about 40 inches below the surface, the mapped texture is sandy clay across 48 percent and clay across 45 percent; average clay content at that depth is 40 percent. Fine sandy loam is the leading surface texture, mapped across 64 percent. These are mapped soil patterns, not a test of a particular bore path near Peachtree Road. The clay can stick to a reamer and tighten around a pipe, so the actual route still needs field evaluation.

USDA soil survey, inside the Balch Springs city limitsWhat is mapped
Soil series mappedRader 48 percent, Wilson 11 percent, Ferris 9 percent, Axtell 7 percent and Mabank 5 percent
Texture at the surfacefine sandy loam 64 percent, clay 21 percent and clay loam 11 percent
Texture about 40 inches downsandy clay 48 percent, clay 45 percent and sandy clay loam 6 percent
Engineering class about 40 inches downlean clay (CL) 61 percent and fat clay (CH) 38 percent
Average clay content about 40 inches down40 percent
Bedrock mapped within 60 inches10 percent of the area (0 percent hard rock, 10 percent weathered rock)
Seasonal water table within 60 inches51 percent of the area
Flood prone soils5 percent of the area
High corrosion risk for uncoated steel93 percent of the area

Weathered bedrock is mapped within 60 inches across 10 percent of Balch Springs, with a typical depth of 42 inches, so a route near Hickory Creek needs a plan that can handle changing material. A seasonal water table within 60 inches is mapped across 51 percent, while flood prone soils cover 5 percent. High steel corrosion risk is mapped across 93 percent, a concern for uncoated casing or tracer wire; HDPE avoids that soil corrosion concern. The Cenozoic silty clay decomposition residuum also signals clay rich ground that can swell when wet.

What does it take to bore sandy clay in Balch Springs?

Rader soil and the sandy clay mapped below Balch Springs call for a steady bore plan. Along Peachtree Road, we match fluid, reaming and pipe timing to the ground and keep checking the drill path.

  1. Rader soil can ball onto the reamer, so we use a controlled fluid mix and staged reaming for routes near Belt Line Road.
  2. Clay can swell around pipe, so a Peachtree Road bore is planned to pull pipe soon after the hole is opened.
  3. Seasonal water tables are mapped within 60 inches across 51 percent of the city, so pits near Hickory Creek may need pumping.
  4. We expose each marked utility before drilling close to it, then track and log the bore path beneath Seagoville Road.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

What does a bore have to cross in Balch Springs near Interstate 20?

Interstate 20 and Interstate 635 both run through Balch Springs, and US 175 also crosses the city. Texas State Highway 352 is 1.0 mile outside the limits. A route under one of these highways needs to account for its right of way and the utility line being installed. Belt Line Road runs 4.89 miles inside the city, Seagoville Road 4.16 miles, and Peachtree Road 3.94 miles. Those long streets offer multiple possible routes, so the exact crossing point matters.

CrossingTypeMapped extentWho has a say
Interstate 20Interstate7.4 roadway miles insideState highway office
Interstate 635Interstate6.6 roadway miles insideState highway office
US 175US highway1 roadway miles insideState highway office
Texas State Highway 352Highway nearby1 miles outsideState highway office
Hickory CreekStream4.54 channel miles insideChecked for Corps of Engineers jurisdiction
South Mesquite CreekStream0.27 channel miles insideChecked for Corps of Engineers jurisdiction
Bennett CreekStream nearby0.1 miles outsideChecked for Corps of Engineers jurisdiction
Prairie Creek BranchStream nearby0.2 miles outsideChecked for Corps of Engineers jurisdiction
Bennett BranchStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Gof BranchStream nearby0.7 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroads are mapped inside Balch Springs or within 1 mile outside its limits, so a mapped street and rail crossing is not part of the local route picture. Hickory Creek runs 4.54 channel miles through the city, and South Mesquite Creek runs 0.27 mile. Public mapping shows 14 street crossings of named streams, which can make a creek route a real design factor. There are no lakes or ponds mapped within 1 mile.

Whose permission does a Balch Springs bore in Dallas County need?

Balch Springs is incorporated, so its city streets belong to the city itself; Dallas County is not the street owner inside the city. Work in the right of way of Interstate 20, Interstate 635 or US 175 needs a TxDOT utility permit. The line owner, not the drilling contractor, files through TxDOT’s RULIS system, and the TxDOT Dallas District reviews it. We provide the bore plan and profile for the utility owner’s application. A Hickory Creek crossing also needs a planning check for U.S. Army Corps of Engineers jurisdiction.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already buried near the City of Balch Springs?

The City of Balch Springs public water system uses purchased surface water and serves 28,300 people through 11,244 service connections. For electric conduit near Belt Line Road, county records report service from Oncor Electric Delivery Company, Texas New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric Cooperative. We confirm the line owner for the specific route before planning a conduit bore.

Line ownerWhat it isSourceSize
City of Balch SpringsPublic water systemSurface water bought from another system11,244 connections, 28,300 people served
Oncor Electric Delivery Company, Texas-New Mexico Power, City of Garland, Farmers Electric Cooperative, HILCO Electric Cooperative and Trinity Valley Electric CooperativeElectric utilities reporting service in Dallas CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put the median Balch Springs housing unit year at 1987; 11 percent date before 1960 and 31 percent date to 2000 or later. That mix can mean an older line replacement or a new service near Seagoville Road. Before the drill approaches, we hydrovac pothole every marked utility on the planned path. For a line beneath Peachtree Road, that means exposing the marked utilities there because surface marks do not show burial depth.

Exposed underground utility line in a hand dug potholing pit before a directional bore in Oklahoma
An existing utility line exposed in a pothole before a directional bore in Oklahoma.

Do you cover Balch Springs and nearby Mesquite?

Balch Springs is in Dallas County, covers 9.08 square miles and sits at an elevation of 468 feet. Its ZIP codes are 75180 and 75181. Mesquite is 3.7 miles northeast, and Seagoville is 6.0 miles southeast. Dallas, the county seat, is 10.2 miles northwest; Mesquite is the nearest larger city. Our Yukon, Oklahoma yard is 233 road miles away, about a 4.6 hour drive, which is part of planning mobilization for work near Hickory Creek.

Places near Balch Springs

Which jobs call for a bore near Seagoville Road in Balch Springs?

  • Highway crossing: A route beneath Interstate 20 needs a bore plan that accounts for the highway right of way and the line being installed.
  • Water service: A connection to the City of Balch Springs system may need a route beneath Belt Line Road without cutting the pavement.
  • Fiber drop: A conduit route near Peachtree Road can pass below the street while marked utilities are exposed along the path.
  • Creek crossing: A line beneath Hickory Creek needs a planned profile that accounts for the channel and the mapped seasonal water table.
  • Street replacement: A sewer or water line beneath Seagoville Road can avoid an open cut through the roadway.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of a bore near Belt Line Road in Balch Springs?

Start with a map pin or address near Belt Line Road; an exact spot shows whether the route approaches a street crossing or Hickory Creek. Tell us what will go in the ground, the pipe or conduit size and the footage. A sketch or plans help us understand the entry and exit points and prepare a useful scope for your Balch Springs bore.

A straightforward route along Peachtree Road with clear access and few crossings is simpler to plan than one under Interstate 20 or Hickory Creek. Length, pipe size, Rader soil and any rock affect the work. So do marked utilities that need potholing, pavement, creek crossings, pits, excavator time and sand backfill. The 233 road miles from Yukon also affect mobilization, while a high profile or emergency route changes the planning needed.

Questions people ask about boring in Balch Springs

Does Trinity take directional boring work in Balch Springs and Dallas County?

Yes. We take directional boring jobs in Balch Springs, Dallas County, with our own crews and partner contractor crews from vetted satellite yards. You deal with Trinity from the first call through the bore log, including when the crew on site is a partner crew. Routes beneath Belt Line Road or Hickory Creek can be scoped from your plans and location.

Who controls Peachtree Road in Balch Springs, and can a bore avoid cutting it?

Peachtree Road is a city street because Balch Springs is incorporated. A directional bore can pass beneath it without opening the street surface. The route and entry points still matter, especially where marked utilities lie near the crossing, so the path is planned and utilities are exposed before drilling near them.

How do older lines near Seagoville Road affect a Balch Springs replacement bore?

The American Community Survey 2019 to 2023 five year estimates show a median housing unit year of 1987 in Balch Springs. A replacement near Seagoville Road may follow older buried infrastructure, while newer homes can call for a service connection. We check marked utilities along the chosen route before drilling close to them.

Could water or flooding affect bore pits near Hickory Creek in Balch Springs?

It could. The USDA soil survey maps a seasonal water table within 60 inches across 51 percent of Balch Springs and flood prone soils across 5 percent. Near Hickory Creek, those mapped conditions are reasons to plan pit placement and pumping. The creek route also needs a planning check for federal waterway jurisdiction.

Does Rader soil in Balch Springs create a corrosion concern, and what pipe is used?

Yes, the soil survey maps high steel corrosion risk across 93 percent of Balch Springs. That matters for uncoated steel casing or tracer wire near Belt Line Road. HDPE is not affected by that soil corrosion concern. The line owner selects any coating for steel, and the pipe choice depends on the job design.

What ground does a bore pass through in Balch Springs Rader soil?

Rader soil is mapped across 48 percent of Balch Springs. At about 40 inches below the surface, sandy clay is mapped across 48 percent and clay across 45 percent. Clay can cling to a reamer and grip pipe, so a route near Peachtree Road may call for staged reaming and careful fluid control.

Can I reach someone after hours about an urgent bore near Peachtree Road in Balch Springs?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day for urgent work near Peachtree Road or elsewhere in Balch Springs. The scope still depends on the route, what line is going in and access for the equipment. A map pin helps us understand the location quickly.

How much Texas811 notice is needed for a Balch Springs bore near Belt Line Road?

Paint near Belt Line Road shows a marked line’s position, not its depth. Texas law requires a locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start moves more than 14 days past the notice, request a new ticket; worn or moved marks must be refreshed through Texas811.

What affects the cost of directional boring under Interstate 20 in Balch Springs?

The job scope sets the cost. A bore under Interstate 20 can take more planning than a clear route on a city street. Length, pipe size, Rader soil or rock, utility crossings, pavement, pits and excavator time all matter. A Hickory Creek crossing and mobilization from Yukon also affect the work involved.

Where the Balch Springs facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Balch Springs

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Balch Springs, Texas

Type the address of your job in Balch Springs. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Balch Springs

Same county: Dallas · Irving · Garland · Grand Prairie · Richardson · Rowlett · DeSoto · Carrollton · Cedar Hill · Lancaster · Coppell · Duncanville. All counties: Texas county list.