trinityboringsolutions.com

Cross Mountain Texas Directional Boring: Brackett Soil, Leon Creek And Glen Rose Limestone

Quick Answer: We take directional boring, also called horizontal directional drilling (HDD), work near US 87 and the streets of Cross Mountain. The Yukon, Oklahoma main office is 489 road miles away, so the job is staffed by our own crews or vetted partner crews working from satellite yards. Brackett soil is common here, and clay can cling to the reamer and grip pipe. Leon Creek crossings and the mapped Glen Rose Limestone also shape the bore plan.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Cross Mountain bores at a glance

  • Unincorporated community in Bexar County, Texas. Population 3,944 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 489 miles, about 9.5 hours of driving.
  • Ground: Brackett soil is mapped on 39 percent of the area, with bedrock about 40 inches down.
  • Rock: bedrock is mapped within 60 inches on 75 percent of the area.
  • No state or US highway is mapped inside the boundary. Closest: US 87 and Interstate 10.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Leon Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring near Cross Mountain and US 87?

We take directional boring jobs in Cross Mountain, an unincorporated community in Bexar County. The Census Bureau counted 3,944 residents in 2020; it does not publish yearly estimates for unincorporated places. Along Cielo Vis, Boerne Stage Road or another route in the community, we can install water, sewer, gas, electric conduit or fiber by bore, with the route and line type setting the plan.

Our main office is in Yukon, Oklahoma, and Cross Mountain work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We started directional boring in 1982, and four decades of working through clay, gravel and rock help us plan around Brackett soil and the Glen Rose Limestone mapped beneath Cross Mountain. For a planned Cielo Vis bore, we stay involved from the first call through the bore log, alongside whichever crew is on site.

Ditch Witch JT922 compact directional drill beside the Trinity Boring Solutions truck at NE 24th Street in Oklahoma City
Our Ditch Witch JT922 compact directional drill beside the Trinity truck on a sleeve bore at NE 24th Street in Oklahoma City. Photos on this page are from our jobs in Oklahoma and Texas.

What does the soil survey show for Brackett soil in Cross Mountain?

The USDA soil survey maps Brackett soil across 39 percent of Cross Mountain and Eckrant across 37 percent. Gravelly clay loam is the leading surface texture, mapped over 40 percent of the area, while very cobbly clay covers 32 percent. At about 40 inches below the surface, bedrock is mapped under 75 percent of the area; clay is mapped under 11 percent and very gravelly sand under 4 percent. We treat Brackett and Eckrant soil series on Cross Mountain maps as mapped patterns, not test borings for a specific crossing. Clay can stick to a reamer, so the soil at the actual bore route matters.

USDA soil survey, inside the Cross Mountain mapped community boundaryWhat is mapped
Soil series mappedBrackett 39 percent, Eckrant 37 percent, Krum 11 percent, Lewisville 10 percent and Patrick 4 percent
Texture at the surfacegravelly clay loam 40 percent, very cobbly clay 32 percent and clay 11 percent
Texture about 40 inches downbedrock 75 percent, clay 11 percent and silty clay 10 percent
Engineering class about 40 inches downfat clay (CH) 20 percent and silty gravel (GM) 4 percent
Average clay content about 40 inches down41 percent
Bedrock mapped within 60 inches75 percent of the area (37 percent hard rock, 39 percent weathered rock)
Seasonal water table within 60 inches0 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel61 percent of the area

Bedrock is typically about 12 inches down in the USDA soil survey, and it is mapped within 60 inches across 75 percent of Cross Mountain. The survey maps hard bedrock in 37 percent of the area and weathered bedrock in 39 percent, so the drill may need a rock cutting setup where soil meets rock. The upper member of the Glen Rose Limestone, of Albian age, is mapped here. Seasonal water table and flood prone soils are not mapped, while high steel corrosion risk covers 61 percent of the area; the line owner chooses any steel casing coating.

How do we drill through Cross Mountain bedrock and soil?

We match the bit, fluid and reaming sequence to the ground along each Cross Mountain bore. Brackett clay, cobbly soil and shallow Glen Rose Limestone call for different drilling choices.

  1. Where Brackett clay lines the route, we use a fluid mix suited to sticky ground, ream in stages and plan to pull pipe soon after opening the hole.
  2. With gravelly clay loam and very cobbly clay mapped around Cross Mountain, we check drill depth and pitch at each rod to keep the head on line.
  3. Where the Glen Rose Limestone meets the soil, we slow down and select a rock cutting setup if the mapped bedrock proves hard along the bore.
  4. Before a bore near Leon Creek or Cielo Vis, we expose marked utilities with hydrovac and track the drill head from the surface as depth and pitch are logged.
Trinity Boring Solutions crew in hard hats at the exit pit with rock tooling on a sandstone bore in Guthrie, OK
Our crew at the exit pit with rock tooling on a sandstone bore in Guthrie, Oklahoma.

Where does a line have to go under Leon Creek in Cross Mountain?

US 87 and Interstate 10 sit 0.3 miles outside the mapped Cross Mountain boundary, with no highway mapped inside it. The longest named streets within the community include Cielo Vis and Scenic Loop Road at 2.66 miles each, followed by Boerne Stage Road at 2.63 miles. Saddle Trail runs 2.52 miles. A bore route on any of these streets needs to be checked against the exact property and right of way; when a line crosses pavement, directional drilling can leave the surface uncut.

CrossingTypeMapped extentWho has a say
US 87Highway nearby0.3 miles outsideState highway office
Interstate 10Highway nearby0.3 miles outsideState highway office
Leon CreekStream0.74 channel miles insideChecked for Corps of Engineers jurisdiction
Lee CreekStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Pecan CreekStream nearby0.4 miles outsideChecked for Corps of Engineers jurisdiction
Helotes CreekStream nearby1 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Cross Mountain or within one mile of its boundary, and no street and rail crossings are mapped in the community. Leon Creek runs 0.74 channel miles through the area, and two mapped street crossings of named streams make creek conditions relevant to route planning. Lee Creek and Pecan Creek are also nearby, while no lakes or ponds are mapped within one mile. A Leon Creek crossing is checked for federal water jurisdiction during planning.

Who approves a bore near Cross Mountain in Bexar County?

Cross Mountain has no city government, so a street permit is handled by the county or state with jurisdiction, not a city office. US 87 and Interstate 10 lie just outside the mapped community boundary; work in either highway right of way needs a TxDOT utility permit reviewed by the TxDOT San Antonio District. The line owner, not the drilling contractor, files through TxDOT’s RULIS system. We provide the bore plan and profile for that filing, then work under the utility owner’s permit. TxDOT cover requirements depend on the line type and location.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

What is already in the ground in Bexar County near Cross Mountain?

The water provider for a specific Cross Mountain address has to be confirmed with the city, Bexar County or the local water district before a bore is planned. The public water records do not identify a system matched to this community, so the address must guide that check. For Bexar County crossings, we identify utilities reporting electric service as City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric Cooperative. We confirm the electric line owner before a conduit bore along Cielo Vis or another local route.

Line ownerWhat it isSourceSize
City of San Antonio, Bandera Electric Cooperative, Guadalupe Valley Electric Cooperative, Karnes Electric Cooperative and Pedernales Electric CooperativeElectric utilities reporting service in Bexar CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

We treat Cross Mountain’s median housing year of 2003 from American Community Survey 2019 to 2023 five year estimates as housing context, not subsurface evidence. The survey says 62 percent of homes were built in 2000 or later, 35 percent from 1960 to 1999 and 3 percent before 1960. That mix can mean either a new service or a line replacement near Boerne Stage Road. Before drilling near any marked utility, we use hydrovac potholing to expose it; paint shows position, not depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

Where is Cross Mountain in relation to Grey Forest?

Cross Mountain is an unincorporated community in Bexar County, covering 6.12 square miles at an elevation of 1,423 feet. We use Cross Mountain’s ZIP codes, 78255 and 78256, to identify the service area while confirming each crossing location separately. Grey Forest is 2.5 miles southwest, and Scenic Oaks is 3.8 miles north. San Antonio, the county seat, is 15.4 miles southeast. Our Yukon, Oklahoma main office is 489 road miles away, about a 9.5 hour drive, which is part of planning crew travel for a job on Cielo Vis or near Leon Creek.

Places near Cross Mountain

What would we bore near Boerne Stage Road in Cross Mountain?

  • Highway crossing: A route near US 87 may need a TxDOT permitted bore beneath the highway right of way, with the line owner filing the application.
  • Water service: A service near Cielo Vis starts with confirming the address water provider and exposing marked lines before the drill approaches.
  • Fiber route: A fiber bore along Boerne Stage Road can pass below a driveway without cutting the surface, with potholes placed at marked utilities.
  • Creek crossing: A Leon Creek bore needs a route and depth plan that accounts for the channel and checks for federal water jurisdiction.
  • Neighborhood conduit: A conduit route on Saddle Trail needs the electric line owner confirmed before the bore path is set.
  • Rock bore: A route through Glen Rose Limestone may call for rock drilling equipment if the bedrock is hard at the crossing.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What drives the price of directional boring near Saddle Trail in Cross Mountain?

Send the address or map pin first; a spot on Saddle Trail and a spot near Leon Creek can have different ground and crossings. For a Leon Creek crossing, we need the material, pipe or conduit size, and footage before planning the bore. A sketch or plans help us see the route, access and nearby utilities before we scope the bore.

Brackett and Eckrant ground is a major pricing factor because cobbles, clay and shallow bedrock can change the bit and reaming time. The number of utilities to expose, pavement, pits and any creek crossing also shape the work near Leon Creek. We account for pipe size and bore length, plus mobilization for the 489 road miles from Yukon. A route near US 87 may involve a highway right of way permit, and emergency or high profile work can change the scope.

Questions people ask about boring in Cross Mountain

Does Trinity Boring Solutions take jobs in Cross Mountain, Bexar County, and how are crews assigned?

Yes. We take directional boring work in Cross Mountain, and the job may be handled by our own crew or by a vetted partner contractor working from a satellite yard. Our main office is in Yukon, 489 road miles away. You work with Trinity from the first call through the bore log, whether the crew is on Cielo Vis or another route.

Does Brackett soil in Cross Mountain corrode steel, and what pipe can we use?

The USDA soil survey maps high steel corrosion risk across 61 percent of Cross Mountain, including areas mapped as Brackett soil. For a Boerne Stage Road crossing, we leave any steel casing coating or tracer wire selection to the line owner. HDPE is not affected by this soil corrosion concern. We use the address and planned route, such as near Boerne Stage Road, to discuss the material with the line owner.

What ground might a bore hit in Cross Mountain’s Brackett soil?

The USDA soil survey maps Brackett over 39 percent of Cross Mountain and Eckrant over 37 percent. Gravelly clay loam is the most common surface texture, and about 40 inches down the survey maps bedrock under 75 percent of the area. Those mapped patterns suggest clay, cobbles or rock may affect a bore near Saddle Trail, but they are not test borings.

Is there rock near the surface in Cross Mountain, and how widespread is it?

Yes, the USDA soil survey maps bedrock within five feet across 75 percent of Cross Mountain, with typical bedrock depth about 12 inches. Hard bedrock is mapped under 37 percent of the area and weathered bedrock under 39 percent. A bore near Leon Creek still needs route specific planning because the survey is not a test of the ground at that address.

Who approves a bore under US 87 near Cross Mountain?

For work in the US 87 right of way, TxDOT reviews the utility permit through its San Antonio District. The utility line owner files in TxDOT’s RULIS system, and we supply the bore plan and profile for its application. US 87 is 0.3 miles outside the mapped community boundary, so the exact crossing location determines whether highway right of way approval applies.

Can a line be bored under Leon Creek in Cross Mountain?

A bore can be planned beneath Leon Creek, which runs 0.74 channel miles through Cross Mountain. The route and depth depend on the site and the line being installed. For work near Pecan Creek, we check during planning for US Army Corps of Engineers jurisdiction. Nearby mapped street crossings of named streams also make it important to locate utilities before drilling.

What bore sizes and lengths can Trinity handle near Saddle Trail in Cross Mountain?

We handle lines from 3/4 inch service lines up to 48 inch casing, and bore lengths from 10 feet to 5,000 feet. The right setup for Saddle Trail depends on the pipe or conduit, route, Brackett soil and any utilities to cross. Send the planned size and footage so we can assess the job scope.

How much notice does Texas811 need before a bore on Cielo Vis in Cross Mountain?

For a Cielo Vis bore, Texas law requires a locate request at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before it. If the start moves more than 14 days past the original notice, make a new request. If marks wear off or move, have them refreshed through Texas811 before work continues.

What affects the cost of directional boring near US 87 in Cross Mountain?

The route, length and pipe size matter, along with Brackett clay, shallow bedrock, utilities to expose, pavement, pits and creek crossings. A job near US 87 may also involve highway right of way permitting. Crew mobilization is another factor because Cross Mountain is 489 road miles from our Yukon office. We need the address or map pin and a description of the work to scope it.

Where the Cross Mountain facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Cross Mountain

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Cross Mountain, Texas

Type the address of your job in Cross Mountain. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Cross Mountain

Same county: San Antonio · Converse · Universal City · Live Oak · Timberwood Park · Leon Valley · Lackland AFB · Kirby · Selma · Alamo Heights · Schertz · Windcrest. All counties: Texas county list.