trinityboringsolutions.com

Howardwick Texas Directional Boring: Mobeetie Soil, Fine Sandy Loam and Carrol Creek

Quick Answer: Sherwood Drive, Rick Husband Boulevard and Nocona Drive are among Howardwick’s longest streets, and Trinity Boring Solutions handles directional boring, also called horizontal directional drilling (HDD), for crossings such as Carrol Creek. Howardwick has 45.29 public road miles, while our Yukon yard is 214 road miles away; Texas State Highway 70 also runs through town. USDA maps fine sandy loam across much of Howardwick, and sand can fall in behind the bit unless drilling fluid supports the hole.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Howardwick bores at a glance

  • Incorporated city in Donley County, Texas. Population 367 (Census Bureau 2024 estimate).
  • Road distance from our Yukon, Oklahoma main office: 214 miles, about 4.1 hours of driving.
  • Ground: Mobeetie soil is mapped on 38 percent of the area, with fine sandy loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: Texas State Highway 70. State permit office: TxDOT Childress District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Carrol Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who does directional boring in Howardwick near Texas State Highway 70?

Sherwood Drive, Rick Husband Boulevard and Nocona Drive are among Howardwick’s longest streets; 45.29 public road miles give service routes room to branch off those corridors. Donley County’s incorporated city has 367 residents in the Census Bureau Vintage 2024 estimate. We can bore water, sewer, gas, electric conduit or fiber beneath these streets, with the route and existing lines checked before drilling.

Our main office is in Yukon, Oklahoma, and Howardwick work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. Our roughly 4,100 foot, 48 inch bore under the Arkansas River in Tulsa shows the reach of our work. Compared with that, a run along Nocona Drive is a shorter service or utility route, planned for its line and ground.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What is Howardwick ground like to bore through Mobeetie soil?

The USDA soil survey maps Mobeetie soil across 38% of Howardwick, with Miles soil across 32% and Veal soil across 13%. Fine sandy loam is the mapped surface texture over 84% of the city. At about 40 inches below the surface, the survey maps fine sandy loam over 38% of the area, sandy clay loam over 36% and gravelly loam over 13%. Sandy ground can cut easily but cave behind the bit, so fluid support and staged reaming help keep the hole open. These are mapped patterns, not test borings.

USDA soil survey, inside the Howardwick city limitsWhat is mapped
Soil series mappedMobeetie 38 percent, Miles 32 percent, Veal 13 percent, Olton 4 percent and Lincoln 3 percent
Texture at the surfacefine sandy loam 84 percent, clay loam 4 percent and loamy fine sand 3 percent
Texture about 40 inches downfine sandy loam 38 percent, sandy clay loam 36 percent and gravelly loam 13 percent
Engineering class about 40 inches downsilty clayey sand (SC SM) 38 percent, clayey sand (SC) 34 percent and clayey gravel (GC) 13 percent
Average clay content about 40 inches down21 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches0 percent of the area
Flood prone soils3 percent of the area
High corrosion risk for uncoated steel5 percent of the area

In Howardwick, bedrock is not mapped in the top five feet, which gives no mapped shallow rock layer to plan against but does not rule out deeper rock. The USDA soil survey maps no seasonal water table within 60 inches, while flood prone soils cover 3% of the area, so Carrol Creek still calls for a channel specific depth plan. High steel corrosion risk is mapped across 5%, a reason to confirm casing and tracer wire protection with the line owner. The mapped Ogallala Formation is Pliocene age and includes sand, silt, clay, gravel and caliche, so the actual route may meet changing ground.

How do we bore Howardwick fine sandy loam?

Howardwick’s fine sandy loam and sandy clay loam call for support behind the drill head. We plan the bore around the mapped ground, marked utilities and the surface features along the route.

  1. We check the mapped fine sandy loam and sandy clay loam for the route, then choose fluid and reaming steps that help keep the Howardwick bore open.
  2. Before drilling near Sherwood Drive, we hydrovac expose each marked utility on the bore path because paint shows position, not depth.
  3. As the bore advances near Texas State Highway 70, a walkover locator tracks the head while we log depth and pitch at each rod.
  4. For a Carrol Creek route, we plan depth beneath the channel, keep pits on the banks and check for Corps jurisdiction during planning.
Bobcat E35 mini excavator lowering a 6 inch PVC sleeve into a bore pit in sandy soil at NE 24th Street in northeast Oklahoma City
Lowering a 6 inch PVC sleeve into a bore pit in sandy soil at NE 24th Street in Oklahoma City.

What does a bore have to cross in Howardwick near Carrol Creek?

Texas State Highway 70 has 1.5 mapped roadway miles inside Howardwick, so a crossing or line within its right of way needs a route designed around TxDOT controls. Sherwood Drive is the longest named street at 1.4 miles, followed by Rick Husband Boulevard at 1.39 miles and Nocona Drive at 1.36 miles. Swanson extends 1.3 miles. Those corridors give a bore path choices, but each location still needs utility exposure and room for entry and exit pits.

CrossingTypeMapped extentWho has a say
Texas State Highway 70State highway1.5 roadway miles insideState highway office
Carrol CreekStream0.65 channel miles insideChecked for Corps of Engineers jurisdiction
Salt Fork Red RiverStream nearby0.3 miles outsideChecked for Corps of Engineers jurisdiction
Greenbelt ReservoirLake or pond863 acres, insideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroads are mapped inside Howardwick or within one mile outside its limits, so a mapped rail crossing is not part of the local route picture. Carrol Creek runs 0.65 channel miles through the city, and public mapping shows no street crossing of that named stream. Greenbelt Reservoir, mapped inside town at 863 acres, and the Salt Fork Red River 0.3 miles beyond city limits matter when a route approaches water; creek or lake work gets checked for federal jurisdiction during planning.

Who approves a Howardwick bore under Texas State Highway 70?

Howardwick is incorporated, so Sherwood Drive and Nocona Drive are city streets; Texas State Highway 70 is under TxDOT. Electric and communication lines crossing the highway need 60 inches of cover below the lowest point of the grade, and water lines need the same crossing cover. Pressurized sewer crossings also need 60 inches; the district may set another depth in the permit. Highway work must use boring or tunneling, with casing, and a rural highway bore extends beneath all travel lanes. The utility owner applies through TxDOT’s RULIS system, reviewed by the Childress District; we prepare the bore plan and profile. Carrol Creek work is checked for Corps jurisdiction during planning.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Whose lines are already in the ground in Howardwick, Donley County?

EPA drinking water records do not let us match a public water provider to a Howardwick address. Before a bore near a water line along Rick Husband Boulevard, the provider for that address must be confirmed with the city, Donley County or the local water district. Electric service reported in Donley County comes from Southwestern Electric Power, Southwestern Public Service, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative; we identify the actual line owner before setting conduit specifications.

Line ownerWhat it isSourceSize
Southwestern Electric Power, Southwestern Public Service, Greenbelt Electric Cooperative and Lighthouse Electric CooperativeElectric utilities reporting service in Donley CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

The American Community Survey 2019 to 2023 five year estimates put Howardwick’s median housing year at 1980: 65% of units date from 1960 to 1999, 4% before 1960 and 31% from 2000 onward. That mix can mean replacement bores beside older service runs as well as new connections near Sherwood Drive. Before the drill approaches a marked line, we hydrovac expose it; paint locates it horizontally, not its depth.

Coiled black HDPE conduit fitted with a pulling grip staged on a lawn along a completed bore path
Coiled HDPE conduit fitted with a pulling grip, staged on a lawn along a finished bore path.

How far is Howardwick from Clarendon and our Yukon yard?

Howardwick is in Donley County at 2,758 feet, with 2.03 square miles of land and ZIP code 79226. Clarendon, the county seat, is 6.8 miles south; Lelia Lake is 12.2 miles southeast, and Groom is 16.4 miles northwest. Pampa, the nearest larger city, is 35.6 miles north. From our Yukon yard, the drive is 214 road miles and 4.1 hours, a distance that adds mobilization planning for work on Sherwood Drive or Texas State Highway 70.

Places near Howardwick

What would we bore along Howardwick’s Sherwood Drive?

  • Highway crossing: A bore under Texas State Highway 70 needs a TxDOT route and cover plan before the line can pass beneath its travel lanes.
  • Water service: A service bore near Greenbelt Reservoir starts with confirming the address water provider, then locating and exposing marked lines before drilling.
  • Fiber conduit: A fiber route along Sherwood Drive can pass beneath pavement instead of opening a trench through the traveled street.
  • Creek crossing: A Carrol Creek bore needs a profile that stays below the channel and a check for federal jurisdiction during planning.
  • Electric conduit: Along Rick Husband Boulevard, we confirm the electric line owner before setting conduit requirements or choosing the bore path.
  • Sewer service: A sewer bore near Nocona Drive can avoid an open cut across the street, with depth and pit locations set for the route.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What do you need to quote a bore near Howardwick’s Swanson?

For a Swanson quote, start with the address or a map pin near the proposed route. Tell us whether the line is water, fiber, sewer or another service, then give the pipe or conduit size and expected footage. A sketch showing a Texas State Highway 70 approach, Carrol Creek or nearby marked utilities helps us see the crossings and pit locations.

The price follows the work at the address. Mobeetie soil and the sandy clay loam mapped about 40 inches down affect drilling and hole support; Texas State Highway 70, Carrol Creek and marked utilities add crossing and exposure work. Pavement, concrete, pit access, excavator time and sand backfill also change the plan. Howardwick’s 214 road miles from Yukon affect mobilization, while emergency timing or a high profile route can add planning needs.

Questions people ask about boring in Howardwick

Does Trinity take directional boring work in Howardwick and Donley County?

Yes. Trinity takes directional boring work in Howardwick, and the job is staffed with our own crews or from satellite yards operated by drilling partners we have vetted. You work with Trinity through the bore log, whichever crew is on site. A route on Sherwood Drive is planned around its marked utilities and the line being installed.

Can a line be bored under Carrol Creek in Howardwick?

A bore under Carrol Creek can be planned to pass below the channel, with the depth set for the crossing and the route checked for U.S. Army Corps of Engineers jurisdiction during planning. The creek runs 0.65 channel miles through Howardwick. We also plan where entry and exit pits can sit without cutting the creek banks.

Who owns electric lines in Howardwick, Donley County, and who confirms conduit specs?

Southwestern Electric Power, Southwestern Public Service, Greenbelt Electric Cooperative and Lighthouse Electric Cooperative report electric service in Donley County. That does not identify the provider at every Howardwick address. We confirm the line owner before a conduit bore, then use the owner’s requirements to plan the route along a street such as Rick Husband Boulevard.

Does Howardwick control Nocona Drive, and does a bore require cutting the street?

Howardwick is an incorporated city, so Nocona Drive is a city street. Directional boring can place a line beneath its pavement without opening a trench through the street; entry and exit pits still need suitable locations. We expose marked utilities on the planned path before drilling near them.

What do Howardwick homes near Rick Husband Boulevard say about older buried lines?

The American Community Survey 2019 to 2023 five year estimates give Howardwick a median housing year of 1980. Older homes can mean a replacement bore beside an existing service, while newer development can need a new connection. Along Rick Husband Boulevard, we expose marked lines before drilling so their actual depth is known.

What ground does a Howardwick bore pass through in Mobeetie soil?

The USDA soil survey maps Mobeetie soil across 38% of Howardwick. At about 40 inches below the surface, fine sandy loam is mapped over 38% of the area, sandy clay loam over 36% and gravelly loam over 13%. Those mapped textures can change how the hole holds, so they guide planning but do not replace route specific observation.

Can I reach Trinity after hours for an urgent bore in Howardwick near Nocona Drive?

Yes. A person answers Trinity’s phone at (405) 409-7423 24 hours a day, and the company provides emergency response. For an urgent bore near Nocona Drive, have the address or map pin and the line type ready so we can discuss the route, marked utilities and access.

How much notice does Texas811 need for a bore on Howardwick’s Sherwood Drive?

For a bore along Sherwood Drive, the locate request goes to Texas811 at least 48 hours before excavation starts, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days beforehand. If the start moves more than 14 days past the original notice, make a new request. Marks that wear off or move must be refreshed through Texas811 before work continues.

What affects the cost of a Howardwick bore near Texas State Highway 70?

The scope sets the price, not the highway name alone. Mobeetie soil, bore length and pipe or conduit size affect the drilling work; Texas State Highway 70, pavement and marked utilities can add crossing and exposure needs. Carrol Creek, pit access, excavator time and the 214 road miles from Yukon also affect the job plan.

Where the Howardwick facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Howardwick

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Howardwick, Texas

Type the address of your job in Howardwick. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Howardwick

All counties: Texas county list.