trinityboringsolutions.com

Flowella Texas Directional Boring: Palobia Soil, FM 2191 and Los Olmos Creek

Quick Answer: Can we get a line beneath FM 2191 without cutting the road? Trinity Boring Solutions does directional boring, also called horizontal directional drilling (HDD), for Flowella crossings such as FM 2191. Flowella is 633 road miles from our Yukon, Oklahoma main office, so a job near Los Olmos Creek needs mobilization planned with the work. Palobia soil is mostly loamy fine sand at the surface, while sandy clay loam is common about 40 inches down and can affect drilling and fluid choices.

Family Business Since 1965 Boring Since 1982 24 Hour Phone No Utility Strike in 25 Years

Flowella bores at a glance

  • Unincorporated community in Brooks County, Texas. Population 117 (2020 Census count).
  • Road distance from our Yukon, Oklahoma main office: 633 miles, about 12.4 hours of driving.
  • Ground: Palobia soil is mapped on 83 percent of the area, with sandy clay loam about 40 inches down.
  • Rock: no bedrock is mapped in the top 60 inches.
  • Highways inside the boundary: FM 2191 and Texas State Highway 285. State permit office: TxDOT Pharr District.
  • Railroad track inside the boundary: none mapped.
  • Named streams inside the boundary: Los Olmos Creek.
  • Texas811: locate request at least two working days before a bore and no more than 14 days ahead.
  • Range: 3/4 inch service lines to 48 inch casing, 10 feet to 5,000 feet.
  • Phone answered 24 hours a day: (405) 409-7423

Who can I call for directional boring under FM 2191 in Flowella?

Can we get a line under FM 2191 without cutting the road? We take directional boring work in Flowella, an unincorporated community in Brooks County. The Census Bureau counted 117 people here in 2020. A water line can be bored beneath FM 2191, while electric conduit or fiber can run along Texas State Highway 285; the route and line size determine the bore plan.

Our main office is in Yukon, Oklahoma, and Flowella work is done with our own crews and from satellite yards run by partner drilling contractors Trinity has personally vetted. We are a family business that started in 1965, and we have done directional boring since 1982. Our 3/4 inch service line to 48 inch casing range can fit work from a service run near FM 2191 to a larger crossing.

Compact Ditch Witch drill rig boring a new utility line across a front yard on a residential street in Edmond, Oklahoma
Our compact Ditch Witch drill boring a new utility line across a front yard on a residential street in Edmond, Oklahoma. Photos on this page are from our jobs in Oklahoma and Texas.

What is Flowella ground like to bore through Palobia soil?

The USDA soil survey maps Palobia across 83 percent of Flowella, with Palobia loamy fine sand on 81 percent of the mapped community boundary. Loamy fine sand makes up 92 percent of the mapped surface texture. At about 40 inches below the surface, sandy clay loam is mapped under 83 percent of the area, with an average clay content of 27 percent at that depth. We treat Palobia, Comitas, and Papagua as mapped soil patterns, not test borings, when planning Flowella boring work. Near FM 2191, a bore still needs a site specific plan because loose surface material and firmer soil below can behave differently.

USDA soil survey, inside the Flowella mapped community boundaryWhat is mapped
Soil series mappedPalobia 83 percent, Comitas 11 percent and Papagua 4 percent
Texture at the surfaceloamy fine sand 92 percent and fine sandy loam 7 percent
Texture about 40 inches downsandy clay loam 83 percent, fine sandy loam 11 percent and sandy clay 4 percent
Engineering class about 40 inches downclayey sand (SC) 84 percent, silty clayey sand (SC SM) 11 percent and lean clay (CL) 5 percent
Average clay content about 40 inches down27 percent
Bedrock mapped within 60 inchesNone mapped
Seasonal water table within 60 inches89 percent of the area
Flood prone soils0 percent of the area
High corrosion risk for uncoated steel89 percent of the area

Bedrock is not mapped in the top five feet across the Flowella area, but the geologic map shows alluvium from the Chibanian, made of intermixed sand, silt and clay. Seasonal water tables are mapped within 60 inches on 89 percent of the area, so pits near Los Olmos Creek may need pumping. Along Los Olmos Creek, we do not rely on mapped flood prone soils when planning Flowella crossings. High steel corrosion risk covers 89 percent of the area, so the line owner should consider casing and tracer wire materials; HDPE avoids that soil corrosion concern.

What does it take to bore Flowella sandy clay loam?

Flowella soil changes with depth: Palobia loamy fine sand is common at the surface, and sandy clay loam is widely mapped about 40 inches down. We set the drilling fluid and reaming approach for the actual route.

  1. At a Flowella route through Palobia loamy fine sand, we use drilling fluid to help support the hole and ream in stages before the pipe pull.
  2. Where sandy clay loam is mapped at about 40 inches, we adjust the fluid and reaming plan to the ground encountered along the FM 2191 route.
  3. Seasonal water tables are mapped within 60 inches across much of Flowella, so pits near Los Olmos Creek may need to be kept small and pumped.
  4. Before drilling near FM 2191, we hydrovac expose every marked utility on the route, then track the head and log depth and pitch.
Walkover locator at the edge of the wetland on a directional bore at the Cimarron site in Logan County, Oklahoma
Walkover locator at the edge of a wetland on a directional bore in Logan County, Oklahoma.

Where does a line have to go under FM 2191 in Flowella?

FM 2191 has 2.0 mapped roadway miles inside the Flowella community boundary, and Texas State Highway 285 has 1.0 mile. Both are state highways, so a route beneath either one needs a bore plan that fits the road crossing and the line being installed. No named local streets are listed in the mapped records, though public roads total 6.7 centerline miles. A map pin or plan helps us identify whether the work is beside FM 2191, beneath it, or along another road.

CrossingTypeMapped extentWho has a say
FM 2191State highway2 roadway miles insideState highway office
Texas State Highway 285State highway1 roadway miles insideState highway office
Los Olmos CreekStream0.45 channel miles insideChecked for Corps of Engineers jurisdiction
Palobia CreekStream nearby0.8 miles outsideChecked for Corps of Engineers jurisdiction
Swipe the table sideways to see every column.

No railroad is mapped inside Flowella or within one mile outside its boundary, so there is no mapped track crossing to plan around. Los Olmos Creek runs for 0.45 channel miles inside the community, and mapped roads cross named streams at 2 locations. A bore route under the creek needs its own depth and access review. No lakes or ponds are mapped within one mile of Flowella.

Whose permission does a Flowella bore in Brooks County need?

Flowella has no city government, so a road crossing is handled by the county or by the state agency responsible for that road. FM 2191 and Texas State Highway 285 are state highways in the mapped community, and TxDOT’s Pharr District reviews utility work in Brooks County. The utility owner, not the drilling contractor, files the right of way application in TxDOT’s RULIS system. We give the owner a bore plan and profile for that filing. TxDOT rules generally call for 60 inches of cover for electric or communication lines at a highway crossing, with the district able to set another depth in the permit.

Read the rules for yourself: Texas Utilities Code Chapter 251 on notice to Texas811, the Texas811 questions and answers page, the TxDOT Utility Accommodation Rules, 43 TAC 21.40 and TxDOT utility permits in RULIS.

Which utilities serve Flowella and Brooks County?

The water provider for a specific Flowella address has to be confirmed with the county or local water district before a bore is planned; public records do not match a system to this place. For electric service in Brooks County, AEP Texas Central, Magic Valley Electric Cooperative, Medina Electric Cooperative and Nueces Electric Cooperative report service. That does not establish which one serves a particular address. We confirm the line owner before planning an electric conduit bore near FM 2191.

Line ownerWhat it isSourceSize
AEP Texas Central, Magic Valley Electric Cooperative, Medina Electric Cooperative and Nueces Electric CooperativeElectric utilities reporting service in Brooks CountyEIA Form 861Confirm the line owner by address
Swipe the table sideways to see every column.

Housing counts are not published reliably for a place as small as Flowella, so the route matters more than a townwide housing profile. Along FM 2191 or Texas State Highway 285, a service may need a long run from the existing line. Brooks County averages 24.3 inches of precipitation a year, with September averaging 4.6 inches, which matters when planning pits and access. Before drilling near a marked utility, we expose it with hydrovac potholing because surface marks do not show its depth.

Hydrovac truck and boring equipment staged beside an airport taxiway for utility daylighting in Oklahoma City
Our hydrovac truck and boring equipment beside an airport taxiway in Oklahoma City, set up to expose a utility crossing.

How far is Flowella from Falfurrias and our Yukon yard?

Flowella is an unincorporated community in Brooks County, at an elevation of 104 feet and with 1.0 square mile of mapped land. Its ZIP code is 78355. Airport Road Addition is 2.1 miles west, and Falfurrias is 5.0 miles west; Falfurrias is also the county seat. Premont is 10.3 miles north, while Sarita is 16.5 miles east. Kingsville, the nearest larger city, is 23.6 miles northeast. From our Yukon, Oklahoma yard, the drive is 633 road miles and 12.4 hours, so mobilization is part of planning work near FM 2191.

Places near Flowella

What boring work comes up near Los Olmos Creek in Flowella?

  • Highway crossing: A bore under FM 2191 can carry water, sewer or conduit beneath the roadway without cutting its pavement.
  • State road run: A conduit route beside Texas State Highway 285 needs a plan for the right of way and the line owner’s requirements.
  • Creek crossing: A route under Los Olmos Creek needs a depth and access plan that accounts for the channel and creek bank.
  • Water service: A service near Falfurrias can start with confirming the provider for the specific Flowella address and mapping its route.
  • Electric conduit: A crossing near FM 2191 starts by identifying which Brooks County electric provider owns the line at that address.
  • Fiber route: A fiber bore along Texas State Highway 285 can avoid open cutting the pavement when the route and permits allow.

More on each kind of work: water line boring, electric line boring, fiber optic boring, road, railroad and creek crossings and municipal boring.

What should I send for a Flowella quote near Los Olmos Creek?

For a bore near Los Olmos Creek, start with the address or map pin, then tell us what will go in the ground. For work on Texas State Highway 285, we include the pipe or conduit size and footage in our crossing details. A sketch or plans help show how the route meets FM 2191 or Texas State Highway 285 and where the pits can sit.

Price follows the work at the site, not just the bore length. Palobia’s sandy surface and the sandy clay loam mapped below affect drilling and reaming. The number of utilities to expose, pavement at FM 2191, and a Los Olmos Creek crossing can add steps. Pit work, sand backfill, excavator time and the pipe size also matter. Flowella is 633 road miles from Yukon, so mobilization is part of the job scope.

Questions people ask about boring in Flowella

Does Trinity Boring Solutions take jobs in Flowella and Brooks County?

Yes. We take directional boring work in Flowella, and our own crews or partner drilling contractors Trinity has vetted can staff the job. You work with Trinity from the first call through the bore log, even if a partner crew is on site. That applies to a crossing near FM 2191 or a service run elsewhere in Brooks County.

Will a bore in Flowella hit rock under Palobia soil?

Bedrock is not mapped in the top five feet of the Flowella area, but that does not rule out rock deeper down. The geologic map shows Chibanian alluvium with sand, silt and clay, as well as Holocene silt sheet in part of the mapped area. A route near FM 2191 still needs site review.

Who approves a bore under FM 2191 in Flowella?

For a utility bore in the FM 2191 right of way, the line owner files through TxDOT’s RULIS system and TxDOT’s Pharr District reviews it. We provide the bore plan and profile for the owner’s application. Flowella has no city government, so this state highway work is not approved by a local city office.

Can you bore a line under Los Olmos Creek in Flowella?

A bore under Los Olmos Creek can be planned, subject to the route, ground and access conditions. The creek runs 0.45 channel miles inside Flowella, and a water crossing is checked for possible U.S. Army Corps of Engineers jurisdiction during planning. The creek bank and seasonal water table also affect pit placement.

Which Brooks County electric utility owns the line at my Flowella address?

AEP Texas Central, Magic Valley Electric Cooperative, Medina Electric Cooperative and Nueces Electric Cooperative report electric service in Brooks County. Public reporting does not identify which provider serves every Flowella address. Confirm the line owner and conduit specifications for your location before planning a bore near Texas State Highway 285.

Who handles Flowella streets in Brooks County, and do you have to cut them?

Flowella is unincorporated and has no city government, so county roads are handled by the county while FM 2191 and Texas State Highway 285 are state highways. A directional bore can pass beneath pavement without an open cut, subject to the road authority’s permit and requirements. No named streets are listed in the mapped records.

How far is Flowella from Kingsville and does Yukon distance change the job?

Kingsville is 23.6 miles northeast of Flowella, and our Yukon, Oklahoma main office is 633 road miles away. That distance can affect mobilization and crew planning for a job near Los Olmos Creek or FM 2191. The route, pipe size, ground and crossings still determine the work scope.

How early should I call Texas811 for a Flowella bore in Brooks County?

For a bore near FM 2191 in Brooks County, Texas law requires the locate request at least 48 hours before excavation, excluding Saturdays, Sundays and legal holidays, and no earlier than 14 days before work. If the start slips more than 14 days past the notice, make a new request. Before work continues near FM 2191, we have worn or moved marks refreshed.

What affects the cost of directional boring near FM 2191 in Flowella?

The price depends on the job scope: bore length, pipe or conduit size, Palobia soil conditions, utilities to expose and pavement at FM 2191 all matter. A Los Olmos Creek crossing, pit work and backfill can add work. Flowella’s 633 road miles from Yukon also affect mobilization. Send a map pin and plans to show the route.

Where the Flowella facts on this page come from

Darren Rice in a safety vest at the bore pit beside the Trinity Boring Solutions Ditch Witch directional drill, with drill rods racked, on the airfield at Will Rogers World Airport in Oklahoma City

About Trinity Boring Solutions

Trinity Boring Solutions is a family business in Yukon, Oklahoma, founded by Dean Rice in 1965 and owned today by Darren Rice, who started its directional boring side in 1982. The company bores across Oklahoma and Texas. No bore is too big or too small: 4 foot sidewalk sleeves to roughly 4,100 feet under the Arkansas River in Tulsa. Reach us at (405) 409-7423.

Get a Quote for a Bore in Flowella

Send the address, what is going in, the size and the footage.

Trinity Boring Solutions
9102 NW Expressway, Yukon, OK 73099
(405) 409-7423 | darren@trinityboringsolutions.com

Trinity Boring Solutions | 24/7 Available ☎ Call (405) 409-7423 Free Quote

Free Bore Planner

Plan Your Bore in Flowella, Texas

Type the address of your job in Flowella. The Bore Planner opens an aerial map at that spot. Drop one pin where the bore starts and one where it ends, tell us what is going in and send the scope to our crew.

Talk to the crew that does the work

Fastest way to a number is a phone call. Tell us where the crossing is and what is going in the ground, and you will get a straight answer on the same call. Bores from 10 feet to 5,000 feet, 3/4 inch service line through 48 inch casing, anywhere in Oklahoma and Texas. We run 24/7 for main breaks and emergency repairs.

Call (405) 409-7423

Answered by a person, not a call center.

Would rather not call? Send the details and we will come back with a written quote.

Quick Quote In Page

County and State Pages for Flowella

Same county: Encino. All counties: Texas county list.